Dergiler / Yerbilimleri / 2014 / Cilt: 35 - Sayı: 3

Kaya Kütlesi Deformasyon Modülünün Farklı Yöntemlerle Belirlenmesi

Determination of Rock Mass Deformation Modulus by Different Methods

Sayfa
253–270
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

ANOVA analizleri bu çalışmada üretilen eşitliğin kaya kütlelerinin Em değerlerinin belirlenmesinde güvenle kullanılabileceğini göstermiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Birçok tasarım parametresi arasında kaya kütlelerinin yerinde deformasyon modülü (Em) kaya mühendisliği proje- lerinin başarıyla yürütülmesinde ve tasarımında hayati öneme sahip olan önemli bir parametredir.
📊
Temel Bulgular & Veri:Bu amaca yönelik olarak, bir tünel güzergâhının otuz yedi farklı noktasındaki volka- nik, tortul ve metamorfik kaya kütleleri üzerinde çalışılmıştır.
💡
Sonuç & Katkı:ANOVA analizleri bu çalışmada üretilen eşitliğin kaya kütlelerinin Em değerlerinin belirlenmesinde güvenle kullanılabileceğini göstermiştir.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Birçok tasarım parametresi arasında kaya kütlelerinin yerinde deformasyon modülü (Em) kaya mühendisliği proje- lerinin başarıyla yürütülmesinde ve tasarımında hayati öneme sahip olan önemli bir parametredir. Ancak, yerinde testler zaman alıcı ve pahalı hatta bazı durumlarda yapılması imkânsız olabilmektedir. Bu sınırlandırmalar, araştır- macıları deformasyon modülünü daha düşük fiyatla kolay bir şekilde diğer kaya kütle özelliklerine (RQD, RMR, Q) dayanarak dolaylı olarak tahmininde ampirik eşitlik geliştirmesine zorlamıştır. Bu çalışmada da kaya kütleleri için ampirik bir eşitlik önerilmiştir. Bu amaca yönelik olarak, bir tünel güzergâhının otuz yedi farklı noktasındaki volka- nik, tortul ve metamorfik kaya kütleleri üzerinde çalışılmıştır. Karşılaştırmak amacıyla, literatürde önerilmiş olan altı farklı ampirik eşitlik yardımıyla Em değerleri hesaplanmıştır. Çoklu karşılaştırma ANOVA testleri ayrıca önerilen ve diğer eşitlikler arasında yapılmıştır. ANOVA analizleri bu çalışmada üretilen eşitliğin kaya kütlelerinin Em değerlerinin belirlenmesinde güvenle kullanılabileceğini göstermiştir.

Abstract

Among the many design properties, the deformation modulus (Em) of in-situ rock mass is a crucial parameter and has a vital importance for the design and successful execution of rock engineering projects. However, in-situ tests are time–consuming, expensive and, in some cases, even impossible to carry out. This constraint forced the investigators to develop an empirical equation for indirect estimation of the deformation modulus of rock masses based on other rock mass properties that can be easily determined at low cost such as RQD, RMR, Q, etc. In this study an empirical equation was proposed for tested rock masses. For these purposes, volcanic, sedimentary and metamorphic rock masses were studied at different thirty seven points along a tunnel alignment. For comparison, Em was calculated from six other empirical equations recommended in the literature. Multiple comparison tests (ANOVA) were also performed among the new relation and other empirical equations. Based on the ANOVA analy- ses, the Em of a rock mass can be estimated from the proposed equation reliably.

🔖

Bu Makaleye Atıf Yap

KARAMAN, K., CİHANGİR, F., DEMİREL, S., KESİMAL, A. (2014). Kaya Kütlesi Deformasyon Modülünün Farklı Yöntemlerle Belirlenmesi. Yerbilimleri, Cilt: 35 - Sayı: 3, 253–270. https://ajindex.com/articles/332367

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Abad, J., Caleda, B., Chacon, E., Gutierrez, V., and Hidlgo, E., 1983. Application of ge- omechanical classification to predict the convergence of coal mine galleries and to design their supports. 5th Inter- national Society for Rock Mechanics Congress, Melbourne, 15-19.
  2. Aksoy, C.A., Geniş, M., Aldaş, G.U., Özacar, V., Özer, S.C., and Yılmaz, Ö., 2012. A comparative study of the determination of rock mass deformation modulus by using different empirical approaches. Engineering Geology, 131-132, 19-28.
  3. Aydan, Ö., Ulusay, R., and Kawamoto, T., 1997. Assessment of rock mass strength for underground excavations. Proceedings of the 36th US rock mechanics sympo- sium, New York, June/July, 777-786.
  4. Barton, N.R., Lien, R. and Lunde, J., 1974. Engi- neering Classification of Rock Masses for the Design of Tunnel Support. Rock Mechanics 6, 189-239.
  5. Barton, N., 1995. The influence of joint proper- ties in modelling jointed rock masses. Keynote Lecture, 8th Congress ISRM, Tokyo. Barton, N.R., 2002. Some New Q-value Corre- lations to Assist in Site Characterization and Tunnel Design. International Jour- nal of Rock Mechanics Mining Scien- ces 39 (2), 185-216.
  6. Basarir, H., Ozsan, A. and Karakus, M., 2005. Analysis of support requirements for a shallow diversion tunnel at Guledar dam site, Turkey. Engineering Geology 81(2), 131-145.
  7. Bieniawski, Z.T., 1973. Engineering classifica- tion of jointed rock masses. Transac- tions of the South African Institute of Civil Engineers, 15 (12), 335-344.
  8. Bieniawski, Z.T., 1976. Rock mass classification in rock engineering applications. Proce- edings of the Symposium on Explorati- on for Rock Engineering, South Africa, Balkema, Rotterdam, 97-106.
  9. Bieniawski, Z.T., 1978, Determining rock mass deformability, experience from case histories. International Journal of Rock Mechanics and Mining Sciences & Ge- omechanics Abstracts, 15 (5), 237-247.
  10. Bieniawski, Z.T., 1989. Engineering rock mass classifications, Wiley, New York, 251. Chun, B., Lee, Y., Seo, D., and Lim, B., 2006. Correlation of deformation modulus by PMT with RMR and rock mass conditi- on. Tunnelling and Underground Space Technol., 21 (3-4): 231-232.
  11. Clerici, A., 1993. Indirect determination of rock masses-case histories. L.M. Riberio e Sousa and N.F. Grossman, eds. Proce- edings of the Symposium EUROCK’93. Rotterdam: AA Balkema, 509-517.
  12. Deere, D. U., 1964. Technical description of rock cores for engineering purposed, Rock Mechanics and Rock Engineering, 1, 17-22.
  13. Geniş, M., Bas