As a result, it was observed that crosslinked polymer brushes were more stable than polymer brushes, and the stability and swelling properties of polymer brushes could be controlled by cross-linking.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:Polymer brushes and brush gels were prepared by RAFT polymerization.
📊
Temel Bulgular & Veri:It was determined that the swelling ratio decreased with increasing grafting density and cross-linker ratio for polymer brushes and brush gels, respectively.
💡
Sonuç & Katkı:As a result, it was observed that crosslinked polymer brushes were more stable than polymer brushes, and the stability and swelling properties of polymer brushes could be controlled by cross-linking.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Özet
Polymer brushes and brush gels were prepared by RAFT polymerization. Prepared surfaces were characterized by XPS, AFM, ellipsometry, and water contact angle measurements. The swelling properties and stability of surfaces were compared. It was determined that the swelling ratio decreased with increasing grafting density and cross-linker ratio for polymer brushes and brush gels, respectively. As a result, it was observed that crosslinked polymer brushes were more stable than polymer brushes, and the stability and swelling properties of polymer brushes could be controlled by cross-linking.
🔖
Bu Makaleye Atıf Yap
DEMİRCİ, S. K., DEMİRCİ, S. (2021). Swelling and durability performance of surface-grafted polymer brushes and brush gels. Organic Communications, Cilt: 14 - Sayı: 1, 73–80. https://ajindex.com/articles/288447
Plechkova, N. V.; Seddon, K. R. Applications of ionic liquids in chemical industry. Chem. Soc. Rev. 2008, 37, 123-150
Zhang, Q.; Zhang, S.; Deng, Y. Recent advances in ionic liquid catalysis. Green Chem. 2011, 13, 2619- 2637
Watanabe, M.; Thomas, M. L.; Zhang, S.; Ueno, K.; Yasuda, T.; Dokko K. Application of ionic liquids to energy storage and conversion materials and devices. Chem. Rev. 2017, 117, 7190-7239
Zhu, S.; Wu, Y.; Chen, Q.; Yu, Z.; Wang, C.; Jin, S.; Ding, Y.; Wu, G. Dissolution of cellulose with ionic liquids and its application: A mini-review. Green Chem. 2006, 8, 325-327
Devasurendra, A. M.; Zhang, C.; Young, J. A.; Tillekeratne, L. M. V.; Anderson, J. L.; Kirchhoff, J. R. Electropolymerized pyrrole-based conductive polymeric ionic liquids and their application for solid-phase microextraction. ACS Appl. Mater. Interfaces 2017, 9, 24955-24963
Grygiel, K.; Lee, J.-S.; Sakaushi, K.; Antonietti, M.; Yuan, Y. Thiazolium poly(ionic liquid)s: Synthesis and application as binder for lithium-ion batteries. ACS Macro Lett. 2015, 4, 1312-1316
Dong, Y.-S.; Xiong, X.-H.; Lu, X.-W.; Wu, Z.-Q.; Chen, H. Antibacterial surfaces based on poly(cationic liquid) brushes: Switchability between killing and releasing via anion counterion switching. J. Mater. Chem. B 2016, 4, 6111-6116
Tauber, K.; Dani, A.; Yuan, J. Covalent cross-linking of porous poly(ionic liquid) membrane via a triazine network. ACS Macro Lett. 2017, 6, 1-5
Giussi, J. M.; Cortez, M. L.; Marmisolle, W. A.; Azzaroni, O. Practical use of polymer brushes in sustainable energy applications: interfacial nanoarchitectonics for high-efficiency devices. Chem. Soc. Rev. 2019, 48, 814-849
Demirci, S.; Kinali-Demirci, S.; Jiang, S. A switchable polymer brush system for antifouling and controlled detection. Chem. Commun. 2017, 53, 3713-3716
Wang, P.; Koberstein, J. T., Morphology of immiscible polymer blend thin films prepared by spin-coating. Macromolecules 2004, 37, 5671-5681
Peng, S.; Bhushan, B. Smart polymer brushes and their emerging applications. RSC Adv. 2012, 2, 8557- 8578
Demirci, S.; Caykara, T. High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization. J. Polym. Sci., Part A: Polym. Chem. 2012, 50, 2999-3007
Chen, W.-L.; Cordero, R.; Tran, H.; Ober, C. K. 50th Anniversary Perspective: Polymer Brushes: Novel Surfaces for Future Materials. Macromolecules 2017, 50, 4089-4113