Journals / Organic Communications / 2021 / Cilt: 14 - Sayı: 1

Swelling and durability performance of surface-grafted polymer brushes and brush gels

Pages
73–80
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, it was observed that crosslinked polymer brushes were more stable than polymer brushes, and the stability and swelling properties of polymer brushes could be controlled by cross-linking.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Polymer brushes and brush gels were prepared by RAFT polymerization.
📊
Key Findings & Data:It was determined that the swelling ratio decreased with increasing grafting density and cross-linker ratio for polymer brushes and brush gels, respectively.
💡
Conclusion & Impact:As a result, it was observed that crosslinked polymer brushes were more stable than polymer brushes, and the stability and swelling properties of polymer brushes could be controlled by cross-linking.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Polymer brushes and brush gels were prepared by RAFT polymerization. Prepared surfaces were characterized by XPS, AFM, ellipsometry, and water contact angle measurements. The swelling properties and stability of surfaces were compared. It was determined that the swelling ratio decreased with increasing grafting density and cross-linker ratio for polymer brushes and brush gels, respectively. As a result, it was observed that crosslinked polymer brushes were more stable than polymer brushes, and the stability and swelling properties of polymer brushes could be controlled by cross-linking.

🔖

Cite This Article

DEMİRCİ, S. K., DEMİRCİ, S. (2021). Swelling and durability performance of surface-grafted polymer brushes and brush gels. Organic Communications, Cilt: 14 - Sayı: 1, 73–80. https://ajindex.com/articles/288447

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Plechkova, N. V.; Seddon, K. R. Applications of ionic liquids in chemical industry. Chem. Soc. Rev. 2008, 37, 123-150
  2. Zhang, Q.; Zhang, S.; Deng, Y. Recent advances in ionic liquid catalysis. Green Chem. 2011, 13, 2619- 2637
  3. Watanabe, M.; Thomas, M. L.; Zhang, S.; Ueno, K.; Yasuda, T.; Dokko K. Application of ionic liquids to energy storage and conversion materials and devices. Chem. Rev. 2017, 117, 7190-7239
  4. Zhu, S.; Wu, Y.; Chen, Q.; Yu, Z.; Wang, C.; Jin, S.; Ding, Y.; Wu, G. Dissolution of cellulose with ionic liquids and its application: A mini-review. Green Chem. 2006, 8, 325-327
  5. Devasurendra, A. M.; Zhang, C.; Young, J. A.; Tillekeratne, L. M. V.; Anderson, J. L.; Kirchhoff, J. R. Electropolymerized pyrrole-based conductive polymeric ionic liquids and their application for solid-phase microextraction. ACS Appl. Mater. Interfaces 2017, 9, 24955-24963
  6. Grygiel, K.; Lee, J.-S.; Sakaushi, K.; Antonietti, M.; Yuan, Y. Thiazolium poly(ionic liquid)s: Synthesis and application as binder for lithium-ion batteries. ACS Macro Lett. 2015, 4, 1312-1316
  7. Dong, Y.-S.; Xiong, X.-H.; Lu, X.-W.; Wu, Z.-Q.; Chen, H. Antibacterial surfaces based on poly(cationic liquid) brushes: Switchability between killing and releasing via anion counterion switching. J. Mater. Chem. B 2016, 4, 6111-6116
  8. Tauber, K.; Dani, A.; Yuan, J. Covalent cross-linking of porous poly(ionic liquid) membrane via a triazine network. ACS Macro Lett. 2017, 6, 1-5
  9. Giussi, J. M.; Cortez, M. L.; Marmisolle, W. A.; Azzaroni, O. Practical use of polymer brushes in sustainable energy applications: interfacial nanoarchitectonics for high-efficiency devices. Chem. Soc. Rev. 2019, 48, 814-849
  10. Demirci, S.; Kinali-Demirci, S.; Jiang, S. A switchable polymer brush system for antifouling and controlled detection. Chem. Commun. 2017, 53, 3713-3716
  11. Wang, P.; Koberstein, J. T., Morphology of immiscible polymer blend thin films prepared by spin-coating. Macromolecules 2004, 37, 5671-5681
  12. Peng, S.; Bhushan, B. Smart polymer brushes and their emerging applications. RSC Adv. 2012, 2, 8557- 8578
  13. Demirci, S.; Caykara, T. High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization. J. Polym. Sci., Part A: Polym. Chem. 2012, 50, 2999-3007
  14. Chen, W.-L.; Cordero, R.; Tran, H.; Ober, C. K. 50th Anniversary Perspective: Polymer Brushes: Novel Surfaces for Future Materials. Macromolecules 2017, 50, 4089-4113