Dergiler / Turkish Journal of Chemistry / 2009 / Cilt: 33 - Sayı: 3

Methanol dehydration reaction to produce clean diesel alternative dimethylether over mesoporous aluminosilicate-based catalysts

Sayfa
355–366
Yayın Tarihi
2009-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Due to its good burning characteristics and high cetane number, dimethylether (DME) is considered as a highly attractive and clean alternative to diesel fuel.
📊
Temel Bulgular & Veri:In the present study, activities of mesoporous aluminosilicate catalysts prepared by the hydrothermal synthesis route and containing Al/Si atomic ratios ranging between 0.03 and 0.18 were tested in methanol dehydration.
💡
Sonuç & Katkı:DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:DME · aluminosilicate · silicotungstic acid

Özet

Due to its good burning characteristics and high cetane number, dimethylether (DME) is considered as a highly attractive and clean alternative to diesel fuel. This ether can be produced by methanol dehydration reaction over solid acid catalysts. In the present study, activities of mesoporous aluminosilicate catalysts prepared by the hydrothermal synthesis route and containing Al/Si atomic ratios ranging between 0.03 and 0.18 were tested in methanol dehydration. The optimum Al/Si ratio was 0.09 for DME synthesis. Activity of silicotungstic acid (STA) impregnated aluminosilicate was also tested. This STA impregnated catalyst showed very high DME yield values at temperatures as low as 250 °C. DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.

Abstract

Due to its good burning characteristics and high cetane number, dimethylether (DME) is considered as a highly attractive and clean alternative to diesel fuel. This ether can be produced by methanol dehydration reaction over solid acid catalysts. In the present study, activities of mesoporous aluminosilicate catalysts prepared by the hydrothermal synthesis route and containing Al/Si atomic ratios ranging between 0.03 and 0.18 were tested in methanol dehydration. The optimum Al/Si ratio was 0.09 for DME synthesis. Activity of silicotungstic acid (STA) impregnated aluminosilicate was also tested. This STA impregnated catalyst showed very high DME yield values at temperatures as low as 250 °C. DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.

🔖

Bu Makaleye Atıf Yap

VARIŞLI, D., TOKAY, K. C., Ay&#, A., ÇİFTÇİ, E. (2009). Methanol dehydration reaction to produce clean diesel alternative dimethylether over mesoporous aluminosilicate-based catalysts. Turkish Journal of Chemistry, Cilt: 33 - Sayı: 3, 355–366. https://ajindex.com/articles/185104

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...