Journals / Turkish Journal of Chemistry / 2009 / Cilt: 33 - Sayı: 3

Methanol dehydration reaction to produce clean diesel alternative dimethylether over mesoporous aluminosilicate-based catalysts

Pages
355–366
Publication Date
2009-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Due to its good burning characteristics and high cetane number, dimethylether (DME) is considered as a highly attractive and clean alternative to diesel fuel.
📊
Key Findings & Data:In the present study, activities of mesoporous aluminosilicate catalysts prepared by the hydrothermal synthesis route and containing Al/Si atomic ratios ranging between 0.03 and 0.18 were tested in methanol dehydration.
💡
Conclusion & Impact:DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:DME · aluminosilicate · silicotungstic acid

Abstract

Due to its good burning characteristics and high cetane number, dimethylether (DME) is considered as a highly attractive and clean alternative to diesel fuel. This ether can be produced by methanol dehydration reaction over solid acid catalysts. In the present study, activities of mesoporous aluminosilicate catalysts prepared by the hydrothermal synthesis route and containing Al/Si atomic ratios ranging between 0.03 and 0.18 were tested in methanol dehydration. The optimum Al/Si ratio was 0.09 for DME synthesis. Activity of silicotungstic acid (STA) impregnated aluminosilicate was also tested. This STA impregnated catalyst showed very high DME yield values at temperatures as low as 250 °C. DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.

Özet

Due to its good burning characteristics and high cetane number, dimethylether (DME) is considered as a highly attractive and clean alternative to diesel fuel. This ether can be produced by methanol dehydration reaction over solid acid catalysts. In the present study, activities of mesoporous aluminosilicate catalysts prepared by the hydrothermal synthesis route and containing Al/Si atomic ratios ranging between 0.03 and 0.18 were tested in methanol dehydration. The optimum Al/Si ratio was 0.09 for DME synthesis. Activity of silicotungstic acid (STA) impregnated aluminosilicate was also tested. This STA impregnated catalyst showed very high DME yield values at temperatures as low as 250 °C. DME selectivity approached unity for all the aluminosilicate catalysts over 300 °C.

🔖

Cite This Article

VARIŞLI, D., TOKAY, K. C., Ay&#, A., ÇİFTÇİ, E. (2009). Methanol dehydration reaction to produce clean diesel alternative dimethylether over mesoporous aluminosilicate-based catalysts. Turkish Journal of Chemistry, Cilt: 33 - Sayı: 3, 355–366. https://ajindex.com/articles/185104

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...