Dergiler / Isı Bilimi ve Tekniği Dergisi / 2026 / Cilt: 46 Sayı: 2

Cymbopogon citrates a Biodegradable waste-derived biodiesel as a potential green fuel: Process Extraction and Utilization in Agricultural Diesel Engine

Ravikumar Jayabal(Academy of Maritime Education and Training (AMET) Deemed to Be University)0000-0001-7877-9913
Sayfa
176–187
Yayın Tarihi
2026-10-30
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

This research underscores the potential of 1-deconal as a viable fuel option for diesel engines running on biodiesel derived from Cymbopogon citratus oil sourced from biomass.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study investigates the use of two specific alcohols, octanol and deconal, alongside diesel and biodiesel derived from Cymbopogon citratus.
📊
Temel Bulgular & Veri:Two ternary blends, labeled as D50-CC30-OCT20 and D50-CC30-DEC20, were formulated and analyzed to assess their engine performance compared to the D50-CC50 blend, pure diesel operation.
💡
Sonuç & Katkı:This research underscores the potential of 1-deconal as a viable fuel option for diesel engines running on biodiesel derived from Cymbopogon citratus oil sourced from biomass.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:cymbopogon citratus · biodiesel · octanol

Özet

This study investigates the use of two specific alcohols, octanol and deconal, alongside diesel and biodiesel derived from Cymbopogon citratus. Two ternary blends, labeled as D50-CC30-OCT20 and D50-CC30-DEC20, were formulated and analyzed to assess their engine performance compared to the D50-CC50 blend, pure diesel operation. Results indicate a decrease in peak cylinder pressure with the use of ternary blends. The maximum rate of heat release was observed to be higher in the octanol-containing blend. Furthermore, the deconal blend exhibited a 2.5% improvement in brake thermal efficiency (BTE) compared to octanol yet remained 3.5% lower than traditional diesel operation. Notably, the NOx emissions of the deconal blend were 4% lower compared to octanol. Overall, higher alcohol blends led to reduced smoke emissions compared to binary blends. Octanol, specifically, showed a 15% decrease in smoke opacity. However, the emissions of hydrocarbons (HC) and carbon monoxide (CO) increased with the use of greater alcohol blends. This research underscores the potential of 1-deconal as a viable fuel option for diesel engines running on biodiesel derived from Cymbopogon citratus oil sourced from biomass.

Abstract

This study investigates the use of two specific alcohols, octanol and deconal, alongside diesel and biodiesel derived from Cymbopogon citratus. Two ternary blends, labeled as D50-CC30-OCT20 and D50-CC30-DEC20, were formulated and analyzed to assess their engine performance compared to the D50-CC50 blend, pure diesel operation. Results indicate a decrease in peak cylinder pressure with the use of ternary blends. The maximum rate of heat release was observed to be higher in the octanol-containing blend. Furthermore, the deconal blend exhibited a 2.5% improvement in brake thermal efficiency (BTE) compared to octanol yet remained 3.5% lower than traditional diesel operation. Notably, the NOx emissions of the deconal blend were 4% lower compared to octanol. Overall, higher alcohol blends led to reduced smoke emissions compared to binary blends. Octanol, specifically, showed a 15% decrease in smoke opacity. However, the emissions of hydrocarbons (HC) and carbon monoxide (CO) increased with the use of greater alcohol blends. This research underscores the potential of 1-deconal as a viable fuel option for diesel engines running on biodiesel derived from Cymbopogon citratus oil sourced from biomass.

🔖

Bu Makaleye Atıf Yap

Elumalai, A. K., Dillikannan, D., Jayabal, R. (2026). Cymbopogon citrates a Biodegradable waste-derived biodiesel as a potential green fuel: Process Extraction and Utilization in Agricultural Diesel Engine. Isı Bilimi ve Tekniği Dergisi, Cilt: 46 Sayı: 2, 176–187. https://doi.org/10.47480/isibted.1789483

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (43)

  1. Adhinarayanan, R., Ramakrishnan, A., Kaliyaperumal, G., De Poures, M., Babu, R. K., & Dillikannan, D. (2024). Comparative analysis on the effect of 1-decanol and di-n-butyl ether as additive with diesel/LDPE blends in compression ignition engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46(1), 9211–9228. https://doi.org/10.1080/15567036.2020.1773967
  2. Alagumalai, A. (2015). Combustion characteristics of lemongrass (Cymbopogon flexuosus) oil in a partial premixed charge compression ignition engine. Alexandria Engineering Journal, 54(3), 405–413. https://doi.org/10.1016/j.aej.2015.03.021
  3. Ashok, B., Jeevanantham, A. K., Nanthagopal, K., Saravanan, B., Senthil Kumar, M., Johny, A., Mohan, A., Kaisan, M. U., & Abubakar, S. (2019). An experimental analysis on the effect of n-pentanol- Calophyllum Inophyllum Biodiesel binary blends in CI engine characteristics. Energy, 173, 290–305. https://doi.org/10.1016/j.energy.2019.02.092
  4. Ashok, B., Nanthagopal, K., Anand, V., Aravind, K. M., Jeevanantham, A. K., & Balusamy, S. (2019). Effects of n octanol as a fuel blend with biodiesel on diesel engine characteristics. Fuel, 235, 363–373. https://doi.org/10.1016/j.fuel.2018.07.126
  5. Ashok, B., Nanthagopal, K., Darla, S., Chyuan, O. H., Ramesh, A., Jacob, A., Sahil, G., Thiyagarajan, S., & Geo, V. E. (2019). Comparative assessment of hexanol and decanol as oxygenated additives with calophyllum inophyllum biodiesel. Energy, 173, 494–510. https://doi.org/10.1016/j.energy.2019.02.077
  6. Babu, D., & Anand, R. (2017). Effect of biodiesel-diesel-n-pentanol and biodiesel-diesel-n-hexanol blends on diesel engine emission and combustion characteristics. Energy, 133, 761–776. https://doi.org/10.1016/j.energy.2017.05.103
  7. Damian, C. S., Devarajan, Y., & Jayabal, R. (2026). Enhancing diesel engine thermal efficiency with candlenut biodiesel and acetylene fumigation: A dual‐fuel approach to performance improvement and emission reduction. Environmental Progress & Sustainable Energy, 45(3), e70168. https://doi.org/10.1002/ep.70168
  8. Damodharan, D., Gopal, K., Sathiyagnanam, A. P., Rajesh Kumar, B., Depoures, M. V., & Mukilarasan, N. (2021). Performance and emission study of a single cylinder diesel engine fuelled with n -octanol/WPO with some modifications. International Journal of Ambient Energy, 42(7), 779–788. https://doi.org/10.1080/01430750.2018.1563824
  9. Damodharan, D., Sathiyagnanam, A. P., Rajesh Kumar, B., & Ganesh, K. C. (2018). Cleaner emissions from a DI diesel engine fueled with waste plastic oil derived from municipal solid waste under the influence of n pentanol addition, cold EGR, and injection timing. Environmental Science and Pollution Research, 25(14), 13611 13625. https://doi.org/10.1007/s11356-018-1558-5
  10. Damodharan, D., Sathiyagnanam, A. P., Rana, D., Kumar, B. R., & Saravanan, S. (2018). Combined influence of injection timing and EGR on combustion, performance and emissions of DI diesel engine fueled with neat waste plastic oil. Energy Conversion and Management, 161, 294–305. https://doi.org/10.1016/j.enconman.2018.01.045
  11. Damodharan, D., Sathiyagnanam, A. P., Rana, D., Saravanan, S., Rajesh Kumar, B., & Sethuramasamyraja, B (2018). Effective utilization of waste plastic oil in a direct injection diesel engine using high carbon alcohols as oxygenated additives for cleaner emissions. Energy Conversion and Management, 166, 81–97. https://doi.org/10.1016/j.enconman.2018.04.006
  12. De Poures, M. V., A.P, S., Rana, D., Babu, R. K., Subramani, S., Sethuramasamyraja, B., & D, D. (2019). Using renewable n-octanol in a non-road diesel engine with some modifications. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41(10), 1194–1208. https://doi.org/10.1080/15567036.2018.1544997
  13. Devarajan, Y., Beemkumar, N., Ganesan, S., & Arunkumar, T. (2020). An experimental study on the influence of an oxygenated additive in diesel engine fuelled with neat papaya seed biodiesel/diesel blends. Fuel, 268, 117254. https://doi.org/10.1016/j.fuel.2020.117254
  14. Devarajan, Y., Munuswamy, D. B., Mahalingam, A., & Nagappan, B. (2017). Performance, Combustion, and Emission Analysis of Neat Palm Oil Biodiesel and Higher Alcohol Blends in a Diesel Engine. Energy & Fuels, 31(12), 13796–13801. https://doi.org/10.1021/acs.energyfuels.7b02939
  15. Devarajan, Y., Munuswamy, D. B., Nagappan, B., & Pandian, A. K. (2018). Performance, combustion and emission analysis of mustard oil biodiesel and octanol blends in diesel engine. Heat and Mass Transfer, 54(6), 1803–1811. https://doi.org/10.1007/s00231-018-2274-x
  16. Dillikannan, D., J, D., De Poures, M. V., Kaliyaperumal, G., A. P, S., Babu, R. K., & N, M. (2020). Effective utilization of waste plastic oil/ n -hexanol in an off-road, unmodified DI diesel engine and evaluating its performance, emission, and combustion characteristics. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42(11), 1375–1390. https://doi.org/10.1080/15567036.2019.1604853
  17. Duan, X., Yan, S., Tie, X., Lei, X., Liu, Z., Ma, Z., Wang, T., & Feng, W. (2024). Bimetallic Ce-Cr doped metal-organic frameworks as a heterogeneous catalyst for highly efficient biodiesel production from insect lipids. Renewable Energy, 224, 120128. https://doi.org/10.1016/j.renene.2024.120128
  18. Duraisamy, K., Ismailgani, R., Paramasivam, S. A., Kaliyaperumal, G., & Dillikannan, D. (2021). Emission profiling of a common rail direct injection diesel engine fueled with hydrocarbon fuel extracted from waste high density polyethylene as a partial replacement for diesel with some modifications. Energy & Environment, 32(3), 481 505. https://doi.org/10.1177/0958305X20942873
  19. Gopal, K., Sathiyagnanam, A. P., Rajesh Kumar, B., Damodharan, D., De Poures, M. V., Saravanan, S., Rana, D., & Sethuramasamyraja, B. (2020). Prediction and optimization of engine characteristics of a DI diesel engine fueled with cyclohexanol/diesel blends. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42(16), 2006–2017. https://doi.org/10.1080/15567036.2019.1607923
  20. Jayabal, R., & Sivanraju, R. (2025). Environmental Impact of Waste Peel Biodiesel–Butylated Hydroxytoluene Nanoparticle Blends on Diesel Engine Emissions. Energy Science & Engineering, 13(2), 742–751. https://doi.org/10.1002/ese3.2033
  21. Kotaiah, K., Periyasamy, P., & Prabhahar, M. (2020). Performance and Emission Characteristics of VCR Diesel Engine with Pre Heated Lemon Grass Biodiesel as Fuel. IOP Conference Series: Materials Science and Engineering, 925(1), 012059. https://doi.org/10.1088/1757-899X/925/1/012059
  22. Liu, L., Xu, Z., Wang, L., Wang, Y., Li, H., & Wu, Y. (2025). Theoretical analysis on high-efficiency combustion and emissions reduction strategy of ammonia-diesel direct injection marine medium-speed engines under energizing-intensifying composite combustion mode. Applied Thermal Engineering, 278, 127391. https://doi.org/10.1016/j.applthermaleng.2025.127391
  23. Ma, H., Fu, P., Zhao, J., Lin, X., Wu, W., Yu, Z., Xia, C., Wang, Q., Gao, M., & Zhou, J. (2022). Pretreatment of Wheat Straw Lignocelluloses by Deep Eutectic Solvent for Lignin Extraction. Molecules, 27(22), 7955. https://doi.org/10.3390/molecules27227955
  24. Ma, Q., Zhang, Q., Liang, J., & Yang, C. (2021). The performance and emissions characteristics of diesel/biodiesel/alcohol blends in a diesel engine. Energy Reports, 7, 1016–1024. https://doi.org/10.1016/j.egyr.2021.02.027
  25. Mohanrajhu, N., Magudeeswaran, G., Jayabal, R., & Prabakar, P. (2026). Experimental assessment of sustainable multi‐fuel strategies: Algal biodiesel, bioethanol, graphene oxide nanoparticles, and hydrogen fumigation in diesel engine applications. Environmental Progress & Sustainable Energy, 45(3), e70243 https://doi.org/10.1002/ep.70243
  26. Mujtaba, M. A., Muk Cho, H., Masjuki, H. H., Kalam, M. A., Farooq, M., Soudagar, M. E. M., Gul, M., Afzal, A., Ahmed, W., Raza, A., Khan, T. M. Y., Bashir, S., & Ahmad, Z. (2021). Effect of primary and secondary alcohols as oxygenated additives on the performance and emission characteristics of diesel engine. Energy Reports, 7, 1116–1124. https://doi.org/10.1016/j.egyr.2020.12.008
  27. Nanthagopal, K., Ashok, B., Garnepudi, R. S., Tarun, K. R., & Dhinesh, B. (2019). Investigation on diethyl ether as an additive with Calophyllum Inophyllum biodiesel for CI engine application. Energy Conversion and Management, 179, 104–113. https://doi.org/10.1016/j.enconman.2018.10.064
  28. Nanthagopal, K., Ashok, B., Saravanan, B., Korah, S. M., & Chandra, S. (2018). Effect of next generation higher alcohols and Calophyllum inophyllum methyl ester blends in diesel engine. Journal of Cleaner Production, 180, 50–63. https://doi.org/10.1016/j.jclepro.2018.01.167
  29. Nanthagopal, K., Ashok, B., Saravanan, B., Ramesh Pathy, M., Sahil, G., Ramesh, A., Nurun Nabi, M., & Golam Rasul, M. (2019). Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine. Fuel, 239, 862–873. https://doi.org/10.1016/j.fuel.2018.11.037
  30. Narayanasamy, B., Jeyakumar, N., & Balasubramanian, D. (2021). Effect of Star Anise as a Natural Antioxidant Additive on the Oxidation Stability of Lemon Grass Oil. Waste and Biomass Valorization, 12(6), 2983–2997. https://doi.org/10.1007/s12649-020-01218-8
  31. Nour, M., Attia, A. M. A., & Nada, S. A. (2019a). Combustion, performance and emission analysis of diesel engine fuelled by higher alcohols (butanol, octanol and heptanol)/diesel blends. Energy Conversion and Management, 185, 313–329. https://doi.org/10.1016/j.enconman.2019.01.105
  32. Nour, M., Attia, A. M. A., & Nada, S. A. (2019b). Improvement of CI engine combustion and performance running on ternary blends of higher alcohol (Pentanol and Octanol)/hydrous ethanol/diesel. Fuel, 251, 10–22. https://doi.org/10.1016/j.fuel.2019.04.026
  33. Rajasekaran, S., Damodharan, D., Gopal, K., Rajesh Kumar, B., & De Poures, M. V. (2020). Collective influence of 1 decanol addition, injection pressure and EGR on diesel engine characteristics fueled with diesel/LDPE oil blends. Fuel, 277, 118166. https://doi.org/10.1016/j.fuel.2020.118166
  34. Rajesh, A., Gopal, K., Melvin Victor, D. P., Rajesh Kumar, B., Sathiyagnanam, A. P., & Damodharan, D. (2020). Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications. Fuel, 278, 118315. https://doi.org/10.1016/j.fuel.2020.118315
  35. Rajesh Kumar, B., Muthukkumar, T., Krishnamoorthy, V., & Saravanan, S. (2016). A comparative evaluation and optimization of performance and emission characteristics of a DI diesel engine fueled with n-propanol/diesel, n-butanol/diesel and n-pentanol/diesel blends using response surface methodology. RSC Advances, 6(66), 61869–61890. https://doi.org/10.1039/C6RA11643D
  36. Rajesh Kumar, B., & Saravanan, S. (2016). Use of higher alcohol biofuels in diesel engines: A review. Renewable and Sustainable Energy Reviews, 60, 84–115. https://doi.org/10.1016/j.rser.2016.01.085
  37. Sathiyamoorthi, R., & Sankaranarayanan, G. (2016). Effect of antioxidant additives on the performance and emission characteristics of a DICI engine using neat lemongrass oil–diesel blend. Fuel, 174, 89–96. https://doi.org/10.1016/j.fuel.2016.01.076
  38. Sathiyamoorthi, R., & Sankaranarayanan, G. (2017). The effects of using ethanol as additive on the combustion and emissions of a direct injection diesel engine fuelled with neat lemongrass oil-diesel fuel blend. Renewable Energy, 101, 747–756. https://doi.org/10.1016/j.renene.2016.09.044
  39. Sharbuddin Ali, S., & Swaminathan, M. R. (2020). Effective utilization of waste cooking oil in a diesel engine equipped with CRDi system using C8 oxygenates as additives for cleaner emission. Fuel, 275, 118003. https://doi.org/10.1016/j.fuel.2020.118003
  40. Venkatesan, H., Sivamani, S., Premkumar T, M., & Tharun, P. (2017). Reduction of exhaust emissions using a nanometallic enriched lemongrass biodiesel blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(21), 2065–2071. https://doi.org/10.1080/15567036.2017.1395495
  41. Yesilyurt, M. K. (2020). A detailed investigation on the performance, combustion, and exhaust emission characteristics of a diesel engine running on the blend of diesel fuel, biodiesel and 1-heptanol (C7 alcohol) as a next-generation higher alcohol. Fuel, 275, 117893. https://doi.org/10.1016/j.fuel.2020.117893
  42. Yilmaz, N., & Vigil, F. M. (2014). Potential use of a blend of diesel, biodiesel, alcohols and vegetable oil in compression ignition engines. Fuel, 124, 168–172. https://doi.org/10.1016/j.fuel.2014.01.075
  43. Zhou, J., Lv, P., He, B., Wu, J., Wang, G., Ma, H., Wang, Y., & Chen, G. (2024). Optimisation of the Ethanol Fermentation Process Using Hydrothermal Pretreatment of Cellulose Waste—Effect of Fermentation Pattern and Strain. Molecules, 29(22), 5266. https://doi.org/10.3390/molecules29225266