Dergiler / Isı Bilimi ve Tekniği Dergisi / 2026 / Cilt: 46 Sayı: 2

Endüstriyel ısıtma uygulamaları için delikli bükümlü bantlı vakumlu tüplü güneş enerjili hava ısıtıcısının analitik parametrik çalışması

Analytical parametric study of an evacuated tube solar air heater with perforated twisted tape for industrial heating applications

Karthi K(Sri Sai Ranganathan Engineering College)0009-0004-5713-2255
Veerakumar Adaikalasamy(Coimbatore Institute of Engineering and Technology)0000-0001-9554-3988
Vijayan Selvaraj(Coimbatore Institute of Engineering and Technology)0000-0001-7370-8876
Venkatramanan R(Suguna College of Engineering)0000-0003-4324-4622
Sayfa
229–241
Yayın Tarihi
2026-10-30
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Tasarım parametrik çalışmasının sonuçları, bir kollektör sisteminin en iyi şekilde her biri emici ve şeffaf çapları 47 mm ve 58 mm uzunluğu 1800 mm olan 20 adet boşaltılmış tüp ile karakterize edildiğini göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Endüstriyel kullanım için vakumlu güneş tüplü hava kollektörü oluşturmanın en büyük zorluğu, belirli bir akış hızı için istenen sıcaklığa ulaşmak için en uygun termal ağların seçilmesidir.
📊
Temel Bulgular & Veri:Endüstriyel proses ısı uygulamalarına yönelik ampirik korelasyonları kullanarak bir termal ağ modeli geliştirmek için, tamamı termal performansı etkileyen, boşaltılan tüplerin çapı ve uzunluğunun yanı sıra bir modüldeki tüplerin miktarı gibi tasarım özelliklerini değerlendirmek üzere teorik bir analiz gerçekleştirilir.
💡
Sonuç & Katkı:Tasarım parametrik çalışmasının sonuçları, bir kollektör sisteminin en iyi şekilde her biri emici ve şeffaf çapları 47 mm ve 58 mm uzunluğu 1800 mm olan 20 adet boşaltılmış tüp ile karakterize edildiğini göstermektedir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:20 adet
⚙️Değişkenler:Delikli bükümlü bant · hava ısıtma sistemleri · güneş enerjisi kolektör ağları bölme plakaları

Özet

Endüstriyel kullanım için vakumlu güneş tüplü hava kollektörü oluşturmanın en büyük zorluğu, belirli bir akış hızı için istenen sıcaklığa ulaşmak için en uygun termal ağların seçilmesidir. Endüstriyel proses ısı uygulamalarına yönelik ampirik korelasyonları kullanarak bir termal ağ modeli geliştirmek için, tamamı termal performansı etkileyen, boşaltılan tüplerin çapı ve uzunluğunun yanı sıra bir modüldeki tüplerin miktarı gibi tasarım özelliklerini değerlendirmek üzere teorik bir analiz gerçekleştirilir. Tasarım parametrik çalışmasının sonuçları, bir kollektör sisteminin en iyi şekilde her biri emici ve şeffaf çapları 47 mm ve 58 mm uzunluğu 1800 mm olan 20 adet boşaltılmış tüp ile karakterize edildiğini göstermektedir. Ayrıca seri ağdaki toplayıcı sayısı arttıkça her bir toplama için sıcaklık artışında gözle görülür bir azalma meydana gelir. 300 kg/saat hızla çalışan iki modülden oluşan termal şebekeye dayalı olarak optimum performans sağlayabilir. Sonuçlar, önerilen boşaltılmış tüplü güneş enerjisi sisteminin 80 ila 100 °C arasındaki sıcaklıklarda sıcak havayı verimli bir şekilde sağlayabildiğini ve bu sistemin bir dizi endüstriyel proses ısıtma uygulaması için uygun olduğunu göstermektedir.

Abstract

A major challenge in creating a vacuum solar tube air collector for industrial use is selecting the optimal thermal networks to reach the desired temperature for a specific flow rate. To develop a thermal network model using empirical correlations for industrial process heat applications, a theoretical analysis is performed to evaluate design features like the diameter and length of the evacuated tubes, as well as the quantity of tubes in a module, all of which impact thermal performance. The results of the design parametric study indicate that a collector system is best characterized by 20 evacuated tubes, each with an absorber and transparent diameters of 47 mm & 58 mm length of 1800 mm, respectively. Additionally, as the number of collectors in a series network increase, there is a notable reduction in the temperature rise for each collection. Based on the thermal network composed of two modules operating at 300 kg/h can provide optimum performance. The results indicate that the proposed evacuated tube solar system is capable of efficiently supplying hot air at temperatures between 80 and 100 °C, making it suitable for a range of industrial process heating applications.

🔖

Bu Makaleye Atıf Yap

K, K., Adaikalasamy, V., Selvaraj, V., R, V. (2026). Endüstriyel ısıtma uygulamaları için delikli bükümlü bantlı vakumlu tüplü güneş enerjili hava ısıtıcısının analitik parametrik çalışması. Isı Bilimi ve Tekniği Dergisi, Cilt: 46 Sayı: 2, 229–241. https://doi.org/10.47480/isibted.1892581

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (43)

  1. Abu Hamed, T., Alkharabsheh, S., 2020. Design and performance analysis of a new evacuated tube solar air heaters equipped with fins and coils. Int. J. Sustain. Energy 39, 997–1008.
  2. Agrawal, A., Kumar, A., Parekh, A.D., 2023. Experimental analysis of evacuated tube solar air heater (ETSAH) with inbuilt sensible thermal energy storage. Heat Transf. 52, 1710–1733. https://doi.org/10.1002/htj.22760
  3. Almeshaal, M., Palaniappan, M., MM, M., 2024. Assessment and enhancement of thermal performance for ring roughened finned jet impingement solar air heater for low-temperature applications. Energy 307, 132632. https://doi.org/10.1016/j.energy.2024.132632
  4. Alvur, E., Cuce, P.M., Cuce, E., 2026. Chapter 7 CFD and solar air collectors. https://doi.org/10.1016/B978-0-443-27418-3.00022-X
  5. Ataee, S., Ameri, M., 2015. Energy and exergy analysis of all-glass evacuated solar collector tubes with coaxial fluid conduit. Sol. Energy 118, 575–591. https://doi.org/10.1016/j.solener.2015.06.019
  6. Baniassadi, A., Momen, M., Amidpour, M., Pourali, O., 2018. Modeling and design of solar heat integration in process industries with heat storage. J. Clean. Prod. 170, 522–534. https://doi.org/10.1016/j.jclepro.2017.09.183
  7. Ben, W., Bouabidi, A., Chrigui, M., Cuce, E., 2025. A comparative study of helical and spiral flow paths in solar air heaters: Experimental testing and CFD modeling. Renew. Energy 244, 122642. https://doi.org/10.1016/j.renene.2025.122642
  8. Çakır, A., Kurmuş, E.F., 2019. Energy storage technologies for building applications. Herit. Sustain. Dev. 1, 41–47. https://doi.org/10.37868/hsd.v1i1.10
  9. CJ, T.R., P, S., M M, M., N, G., 2023. Analytical investigation on thermo hydraulic performance augmentation of triangular duct solar air heater integrated with wavy fins. Int. J. Green Energy 20, 544–554. https://doi.org/10.1080/15435075.2022.2111215
  10. Duraković, B., 2020. PCMs in Separate Heat Storage Modules. pp. 121–146. https://doi.org/10.1007/978-3-030-38335-0_6
  11. Farjana, S.H., Huda, N., Mahmud, M.A.P., Saidur, R., 2018. Solar process heat in industrial systems – A global review. Renew. Sustain. Energy Rev. 82, 2270–2286. https://doi.org/10.1016/j.rser.2017.08.065
  12. Gunes, S., Karakaya, E., 2015. Thermal Characteristics in a Tube With Loose-Fit Perforated Twisted Tapes. Heat Transf. Eng. 36, 1504–1517. https://doi.org/10.1080/01457632.2015.1024985
  13. Hong, Y., Du, J., Wang, S., Ye, W.B., Huang, S.M., 2019. Turbulent thermal-hydraulic and thermodynamic characteristics in a traverse corrugated tube fitted with twin and triple wire coils. Int. J. Heat Mass Transf. 130, 483–495. https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.087
  14. Huddar, V.B., Razak, A., Cuce, E., Gadwal, S., Alwetaishi, M., Afzal, A., Saleel, C.A., Shaik, S., 2022. Thermal Performance Study of Solar Air Dryers for Cashew Kernel: A Comparative Analysis and Modelling Using Response Surface Methodology (RSM) and Artificial Neural Network ( ANN ) 2022. https://doi.org/10.1155/2022/4598921
  15. Kalogirou, S.A., 2004. Solar thermal collectors and applications. Prog. Energy Combust. Sci. 30, 231–295. https://doi.org/10.1016/j.pecs.2004.02.001
  16. Karthickmunisamy, T., Veerakumar, A., Vijayan, S., Venkatramanan, R., 2026a. Experimental investigation of an evacuated tube solar air heater with baffles and perforated twisted tapes for air heating applications. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. https://doi.org/10.1177/09544089251368623
  17. Karthickmunisamy, T., Adaikalasamy, V., S, V., R, V., 2026b. Thermal performance analysis of solar evacuated tube collector with baffle plate air heater using loose–fit perforated twisted tape. Heat Transf. Res. https://doi.org/10.1615/HeatTransRes.2026061691
  18. Karthickmunisamy, T., Veerakumar, A., Vijayan, S., Anbarasan, P., 2026c. Optimizing Performance of Evacuated Tube Solar Air Heater with Perforated Twisted Tape. J. Therm. Sci. Eng. Appl. 1–31. https://doi.org/10.1115/1.4071678
  19. Kumar, A. V., Seenivasan, D., Arjunan, T. V., Venkatramanan, R., & Selvaraj, V., 2023. Solar thermal conversion technologies for process heating applications in automobile industries. Sol. Therm. Convers. Technol. Ind. Process Heat. 119–147.
  20. Kumar, L., Hasanuzzaman, M., Rahim, N.A., 2019. Global advancement of solar thermal energy technologies for industrial process heat and its future prospects: A review. Energy Convers. Manag. 195, 885–908. https://doi.org/10.1016/j.enconman.2019.05.081
  21. Kumar, R., Cuce, E., Kumar, S., Thapa, S., Gupta, P., Goel, B., 2022. Assessment of the Thermo-Hydraulic Efficiency of an Indoor-Designed Jet Impingement Solar Thermal Collector Roughened with Single Discrete Arc-Shaped Ribs.
  22. Kumar, S., Kumar, A., Yadav, A., 2015. Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates. Int. J. Sustain. Eng. 8, 280–293. https://doi.org/10.1080/19397038.2013.878001
  23. Mekhilef, S., Saidur, R., Safari, A., 2011. A review on solar energy use in industries. Renew. Sustain. Energy Rev. 15, 1777–1790. https://doi.org/10.1016/j.rser.2010.12.018
  24. Mishra, R.K., Garg, V., Tiwari, G.N., 2015. Thermal modeling and development of characteristic equations of evacuated tubular collector (ETC). Sol. Energy 116, 165–176. https://doi.org/10.1016/j.solener.2015.04.003
  25. Moataz M. Abdel-Aziz, Abdelkrim Khelifa, Mohammed El Hadi Attia, Erdem Cuce, A.E.K., 2025. Thermal performance enhancement of solar collectors through optimization of outlet temperature. Environ. Prog. Sustain. Energy.
  26. Ong, K.S., 1995. Thermal performance of solar air heaters: Mathematical model and solution procedure. Sol. Energy 55, 93–109.https://doi.org/10.1016/0038-092X(95\00021-I)
  27. Picón-Núñez, M., Martínez-Rodríguez, G., Fuentes-Silva, A.L., 2014. Design of solar collector networks for industrial applications. Appl. Therm. Eng. 70, 1238–1245. https://doi.org/10.1016/j.applthermaleng.2014.05.005
  28. Pinar Mert Cuce, Emre Alvur, Erdem Cuce, Manzoore Elahi M. Soudagar, Abdallah Bouabidi, Shaopeng Guo, Jingyu Cao, Waqas Khalid, Saad Alshahrani, A.A.A.& N.A.M., 2026. Solar thermal systems and AI: Past, present, and future. J. Therm. Anal. Calorim. 151.
  29. Ravichandran, V., Kumar, P.M., Adaikalasamy, V., Gebreyohannes, D.T., 2026. Experimental investigation on solar air heating system using evacuated tube collector with coaxial tube. Sci. Rep. 16, 7923. https://doi.org/10.1038/s41598-026-39094-2
  30. Saxena, A., Agarwal, N., Cuce, E., 2020. Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material. J. Energy Storage 30, 101406. https://doi.org/10.1016/j.est.2020.101406
  31. Saxena, A., Cuce, E., Bandhu, D., Sethi, M., Mert, P., Sagade, A.A., Kumar, A., 2023. Experimental studies of latent heat storage based solar air heater for space heating: A comparative analysis. J. Build. Eng. 69, 106282. https://doi.org/10.1016/j.jobe.2023.106282
  32. Singh, S., Dhiman, P., 2014. Thermal and thermohydraulic performance evaluation of a novel type double pass packed bed solar air heater under external recycle using an analytical and RSM (response surface methodology) combined approach. Energy 72, 344–359. https://doi.org/10.1016/j.energy.2014.05.044
  33. Veera Kumar, A., Arjunan, T.V., Seenivasan, D., Venkatramanan, R., Vijayan, S., 2021a. Thermal performance of an evacuated tube solar collector with inserted baffles for air heating applications. Sol. Energy 215, 131–143. https://doi.org/10.1016/j.solener.2020.12.037
  34. Veera Kumar, A., Arjunan, T.V., Seenivasan, D., Venkatramanan, R., Vijayan, S., Matheswaran, M.M., 2021b. Influence of twisted tape inserts on energy and exergy performance of an evacuated Tube-based solar air collector. Sol. Energy 225, 892–904. https://doi.org/10.1016/j.solener.2021.07.074
  35. Veera Kumar, A., Arjunan, T. V., Seenivasan, D., Venkatramanan, R., Vijayan, S., 2021c. Techno-Economic evaluation of an evacuated tube solar air collector with inserted baffles. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 235, 1027–1038. https://doi.org/10.1177/0954408921989847
  36. Veerakumar, A., Karthickmunisamy, T., Venkatramanan, R., Vijayan, S., Kumar, R.P.S.R., Karthi, K., Ganesh, V.H., 2026. Isı Bilimi ve Tekniği Dergisi Thermal performance of an evacuated tube solar air heater inserted with copper tubes termal performansı 1, 156–166. https://doi.org/10.47480/isibted.1827768
  37. Venkatramanan, R., Arjunan, T.V., Seenivasan, D., Veera Kumar, A., 2022. Parametric study of evacuated tube collector solar air heater with inserted baffles on thermal network for low-temperature applications. J. Clean. Prod. 367, 132941. https://doi.org/10.1016/j.jclepro.2022.132941
  38. Venkatramanan, R., Arjunan, T. V., Seenivasan, D., Kumar, A.V., Selvaraj, V., Matheswaran, M.M., 2025. Energetic and enviro-economic performance of medium scale evacuated tube solar air heating system for industrial applications. Proc. Inst. Mech. Eng. Part A J. Power Energy 239, 388–399. https://doi.org/10.1177/09576509241307457
  39. Wang, P.-Y., Guan, H.-Y., Liu, Z.-H., Wang, G.-S., Zhao, F., Xiao, H.-S., 2014. High temperature collecting performance of a new all-glass evacuated tubular solar air heater with U-shaped tube heat exchanger. Energy Convers. Manag. 77, 315–323. https://doi.org/10.1016/j.enconman.2013.08.019
  40. Xu, L., Wang, Z., Yuan, G., Li, X., Ruan, Y., 2012. A new dynamic test method for thermal performance of all-glass evacuated solar air collectors. Sol. Energy 86, 1222–1
  41. Ben, W., Bouabidi, A., Chrigui, M., Cuce, E., 2025. A comparative study of helical and spiral flow paths in solar air heaters: Experimental testing and CFD modeling. Renew. Energy 244, 122642. https://doi.org/10.1016/j.renene.2025.122642
  42. Huddar, V.B., Razak, A., Cuce, E., Gadwal, S., Alwetaishi, M., Afzal, A., Saleel, C.A., Shaik, S., 2022. Thermal Performance Study of Solar Air Dryers for Cashew Kernel: A Comparative Analysis and Modelling Using Response Surface Methodology (RSM) and Artificial Neural Network ( ANN ) 2022. https://doi.org/10.1155/2022/4598921
  43. Saxena, A., Cuce, E., Bandhu, D., Sethi, M., Mert, P., Sagade, A.A., Kumar, A., 2023. Experimental studies of latent heat storage based solar air heater for space heating: A comparative analysis. J. Build. Eng. 69, 106282. https://doi.org/10.1016/j.jobe.2023.106282