Dergiler / Politeknik Dergisi / 2025 / Cilt: 28 Sayı: 6

Dikdörtgen Delikli İzotropik Levhalarda Gerilme Yığılması Faktörünün (GYF) Parametrik Analizi ve Yapay Sinir Ağı Yaklaşımı

Parametric Analysis of Stress Concentration Factor in Rectangular Holed Isotropic Plates and Artificial Neural Network Approach

Oğuzhan Nazlım(GAZI UNIVERSITY, FACULTY OF TECHNOLOGY)0000-0002-7557-6333
Sayfa
1667–1679
Yayın Tarihi
2025-12-04
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu çalışma, mühendislerin ve tasarımcıların dikdörtgen delikli plakalar üzerindeki gerilme analizlerini hızlı ve verimli bir şekilde yapabilmelerini sağlayacak bir yöntem sunmaktadır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, dikdörtgen delikli ince bir plağın kayma gerilmesi altındaki davranışları parametrik olarak Sonlu Elemanlar Analizi (SEA) yöntemi ile incelenmiş ve Yapay Sinir Ağları (YSA) ile modellenmiştir.
📊
Temel Bulgular & Veri:Parametrik modelde, plakadaki geometrik parametreler değiştirilerek farklı stres dağılımları elde edilmiştir.
💡
Sonuç & Katkı:Bu çalışma, mühendislerin ve tasarımcıların dikdörtgen delikli plakalar üzerindeki gerilme analizlerini hızlı ve verimli bir şekilde yapabilmelerini sağlayacak bir yöntem sunmaktadır.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Dikdörtgen delikli plak · kayma gerilmesi · gerilme yığılma faktörü (GYF)

Özet

Bu çalışmada, dikdörtgen delikli ince bir plağın kayma gerilmesi altındaki davranışları parametrik olarak Sonlu Elemanlar Analizi (SEA) yöntemi ile incelenmiş ve Yapay Sinir Ağları (YSA) ile modellenmiştir. İncelenen plaka üzerindeki dikdörtgen delik nedeniyle oluşan gerilme yoğunluğu detaylı olarak analiz edilmiştir. Parametrik modelde, plakadaki geometrik parametreler değiştirilerek farklı stres dağılımları elde edilmiştir. Deneysel sonuçların doğruluğu Sonlu eleman analizi ile test edilmiş ve deneyel çalışma verileri kullanılarak YSA yöntemi ile yeni bir model oluşturulmuştur. Oluşturulan yeni model ile; gerilme, deformasyon, gerilme yoğunluğu gibi parametreler için güvenilir tahminler yapılmıştır. Bu çalışma, mühendislerin ve tasarımcıların dikdörtgen delikli plakalar üzerindeki gerilme analizlerini hızlı ve verimli bir şekilde yapabilmelerini sağlayacak bir yöntem sunmaktadır.

Abstract

In this study, the behavior of a thin plate with rectangular holes under shear stress was investigated parametrically using the Finite Element Analysis (FEA) method and modeled using Artificial Neural Networks (ANN). The stress intensity caused by the rectangular hole on the examined plate was analyzed in detail. In the parametric model, different stress distributions were obtained by changing the geometric parameters on the plate. The accuracy of the experimental results was tested using the Finite Element Analysis and a new model was created using the experimental study data using the ANN method. With the new model created, reliable estimates were made for parameters such as stress, deformation, and stress intensity. This study offers a method that will enable engineers and designers to perform stress analyses on plates with rectangular holes quickly and efficiently.

🔖

Bu Makaleye Atıf Yap

Nazlım, O. (2025). Dikdörtgen Delikli İzotropik Levhalarda Gerilme Yığılması Faktörünün (GYF) Parametrik Analizi ve Yapay Sinir Ağı Yaklaşımı. Politeknik Dergisi, Cilt: 28 Sayı: 6, 1667–1679. https://doi.org/10.2339/politeknik.1653795

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (36)

  1. Özkan, M. and M. Kaygisiz," Elipsel Delikli Plakalarda Oluşan Gerilmelerin Tanımlanması ve Yapay Sinir Ağları ile Tahmini". Gazi University Journal of Science Part C, 4: p. 135-145, (2016).
  2. Ozkan, M.T. and F. Erdemir," Determination of theoretical stress concentration factor for circular/elliptical holes with reinforcement using analytical, finite element method and artificial neural network techniques". Neural Computing and Applications, 33(19): p. 12641-12659, (2021).
  3. Özkan, M. and F. Erdemir," Determination of theoretical stress concentration factor for circular/elliptical holes with reinforcement using analytical, finite element method and artificial neural network techniques". Neural Computing and Applications, 33, (2021).
  4. Özkan, M.T., M. Eren, and İ. Toktaş," Modeling of Stress Concentration Factor Using Artificial Neural Networks for a Flat Tension Bar with Opposite V-Shaped Notches". Politeknik Dergisi, 26(3): p. 1199-1205, (2023).
  5. Erdemir, F., et al.," Determination of Stress Concentration Factor (Kt) for a Crankshaft Under Bending Loading: An Artificial Neural Networks Approach". Politeknik Dergisi, 23(3): p. 813-819, (2020).
  6. Ozkan, M.T. and F. Erdemir," Determination of stress concentration factors for shafts under tension". 62(4): p. 413-421, (2020).
  7. Pandey, M., et al." Investigation of Variation in Stress Concentration Factor with the Change in Orientation of Central Hole on a Rectangular Plate". in Recent Advances in Mechanical Engineering., Singapore: Springer Singapore. (2021).
  8. Patel, B.P. and R.H. Patel," Determination and Analysis of Stress Concentration Factor in Finite Plate With Different Polygonal Discontinuities Under Uniaxial Compression Using Finite Element Analysis (FEA)". Engineering Research Express, 6(2): p. 025552, (2024).
  9. Akour, S. and D. Nicholson," Defense Hole Design for a Shear Dominant Loaded Plate". International Journal of Applied Mechanics, 2: p. 381-398, (2010).
  10. Guan, Y. and Y. Li," Stress Concentration and Optimized Analysis of an Arbitrarily Shaped Hole with a Graded Layer under Anti-Plane Shear". Applied Sciences, 8: p. 2619, (2018).
  11. Zhu, Z., et al.," Shear Buckling of Ship Plates With Different Holes". Mechanics & Industry, 23: p. 4, (2022).
  12. Kambale, S.R. and U.D. Gulhane," Relief holes for the mitigation of stress concentration factor of a thin rectangular plate under in-plane loading". International Journal of Advance Research and Innovative Ideas in Education, 1: p. 166-174, (2015).
  13. Yang, Z., et al.," The Concentration of Stress and Strain in Finite Thickness Elastic Plate Containing a Circular Hole". International Journal of Solids and Structures, 45(3-4): p. 713-731, (2008).
  14. Chauhan, M.M. and D.S. Sharma," Stresses in finite anisotropic plate weakened by rectangular hole". International Journal of Mechanical Sciences, 101-102: p. 272-279, (2015).
  15. Dave, J.M. and D.S. Sharma," Stress field around rectangular hole in functionally graded plate". International Journal of Mechanical Sciences, 136: p. 360-370, (2018).
  16. Jafari, M., M.H. Bayati Chaleshtari, and H. Abdolalian," General solution of stress field in exponential functionally graded material plates containing a quasi-rectangular cutout". Journal of Composite Materials, 53(3): p. 405-421, (2019).
  17. Louhghalam, A., et al.," Analysis of stress concentrations in plates with rectangular openings by a combined conformal mapping – Finite element approach". International Journal of Solids and Structures, 48(13): p. 1991-2004, (2011).
  18. Nageswara Rao, D.K., et al.," Stress around square and rectangular cutouts in symmetric laminates". Composite Structures, 92(12): p. 2845-2859, (2010).
  19. Pan, Z., Y. Cheng, and J. Liu," Stress analysis of a finite plate with a rectangular hole subjected to uniaxial tension using modified stress functions". International Journal of Mechanical Sciences, 75: p. 265-277, (2013).
  20. Rahman, S.," Stress Analysis of Finite Steel Plate with a Rectangular Hole Subjected to Uniaxial Stress Using Finite Element Method". Journal of Marine Science: Research & Development, 08, (2018).
  21. Gunwant, D.," Stress Concentration Studies in Flat Plates with Rectangular Cut-Outs Using Finite Element Method". International Journal of Mathematical, Engineering and Management Sciences, 4: p. 66-76, (2019).
  22. L.Bharambe, S.I.K.," Stress Concentration of plate with rectangular cutout". International Research Journal of Engineering and Technology (IRJET), 6(4): p. 3671-3675, (2019).
  23. Toktaş, İ.," Eliptik Delikli İnce Cidarlı Küresel Bir Elemanın Basınç Altında Gerilme Yığılma Faktörünün Sonlu Elemanlar Analizi Ve Yapay Sinir Ağları İle Modellenmesi". Politeknik Dergisi, 27(2): p. 819-827, (2024).
  24. Pilkey, W. and D. Pilkey," Peterson's Stress Concentration Factors, Third Edition". Peterson's Stress Concentration Factors, Third Edition: p. 1-522, (2008).
  25. Beale, M.H. and H.B. Demuth," Neural network toolbox for MATLAB". MathWorks, 2, (2002).
  26. Beale, M.H., M.T. Hagan, and H.B. Demuth," Neural network toolbox Getting Started Guide". MathWorks, 2, (2016).
  27. Beale, M.H., M.T. Hagan, and H.B. Demuth," Neural network toolbox 1User's Guide". MathWorks, 2, (2018).
  28. Domany, E., J.L. van Hemmen, and K. Schulten," Models of neural networks II". Springer Science & Business Media, (1995).
  29. Hagan, M.T., H.B. Demuth, and M.H. Beale," Neural Network Design". PWS Pub. (1996).
  30. Hagan, M.T. and M.B. Menhaj," Training feedforward networks with the Marquardt algorithm". IEEE transactions on Neural Networks, 5(6): p. 989-993, (1994).
  31. Haykin, S.S.," Neural Networks: A Comprehensive Foundation". Prentice Hall PTR, (1998).
  32. Haykin, S.S." Neural Networks and Learning Machines"., (2008).
  33. Smith, J.," Neural Network Architectures. Examples Using MATLAB". CreateSpace Independent Publishing Platform, (2017).
  34. Werbos, P.," Beyond Regression: New Tools for Prediction and Analysis in the Behavioral Science. Thesis (Ph. D.). Appl. Math. Harvard University", (1974).
  35. Rosenblatt, J.," Basic Statistical Methods and Models for the Sciences (1st ed.)". Oxford University Press (2002).
  36. Perez, C.," Cluster Analysis and Applications (Statistics And Data Analysis with Matlab) ". CESAR PEREZ (2019).