Dergiler / Politeknik Dergisi / 2026 / Cilt: 29 Sayı: 4

Şekil Hafızalı Alaşım Takviyeli Kompozit Yapılarda Aktif Titreşim Sönümleme: Teknolojiler, Mekanizmalar ve Güncel Zorluklar Üzerine Bir Derleme

Active Vibration Damping in Shape Memory Alloy Reinforced Composite Structures: A Review on Technologies, Mechanisms, and Current Challenges

Sayfa
1–19
Yayın Tarihi
2026-06-15
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuç olarak, standardize edilmiş karakterizasyon protokollerinin geliştirilmesi, çok ölçekli modelleme yaklaşımlarının güçlendirilmesi ve endüstriyel ölçekte üretim uygulamalarına yönelik araştırmaların yoğunlaştırılması, alanın ilerlemesi için öncelikli yönler olarak değerlendirilmektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Şekil hafızalı alaşımlar (ŞHA), özellikle nikel-titanyum (NiTi) esaslı sistemler, östenit ve martensitik faz dönüşümleri aracılığıyla bünyelerindeki ısıyı mekanik enerjiye dönüştürme kapasiteleri nedeniyle aktif titreşim kontrolü alanında giderek artan bir ilgi görmektedir.
📊
Temel Bulgular & Veri:Bu derleme, ŞHA takviyeli akıllı kompozit yapılarda titreşim sönümleme mekanizmalarını, uygulanan kontrol stratejilerini ve mevcut tasarım sınırlamalarını kapsayan yayımlanmış literatürü düzenli biçimde taramakta ve eleştirel bir perspektifle değerlendirmektedir.
💡
Sonuç & Katkı:Sonuç olarak, standardize edilmiş karakterizasyon protokollerinin geliştirilmesi, çok ölçekli modelleme yaklaşımlarının güçlendirilmesi ve endüstriyel ölçekte üretim uygulamalarına yönelik araştırmaların yoğunlaştırılması, alanın ilerlemesi için öncelikli yönler olarak değerlendirilmektedir.
🔬Tür:Uygulamalı Anket & Alan Araştırması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Şekil hafızalı alaşımlar · aktif titreşim kontrolü · akıllı kompozit yapılar

Özet

Şekil hafızalı alaşımlar (ŞHA), özellikle nikel-titanyum (NiTi) esaslı sistemler, östenit ve martensitik faz dönüşümleri aracılığıyla bünyelerindeki ısıyı mekanik enerjiye dönüştürme kapasiteleri nedeniyle aktif titreşim kontrolü alanında giderek artan bir ilgi görmektedir. Bu derleme, ŞHA takviyeli akıllı kompozit yapılarda titreşim sönümleme mekanizmalarını, uygulanan kontrol stratejilerini ve mevcut tasarım sınırlamalarını kapsayan yayımlanmış literatürü düzenli biçimde taramakta ve eleştirel bir perspektifle değerlendirmektedir. Tarama kapsamında, 1990'lı yıllardan günümüze uzanan dönemde Web of Science, Scopus ve ScienceDirect veri tabanlarından elde edilen hakemli makaleler, konferans bildirileri ve teknik raporlar incelenmiştir; anahtar sözcük kombinasyonları olarak "şekil hafızalı alaşım", "aktif titreşim kontrolü", "NiTi kompozit" ve "martensitik dönüşüm" ifadeleri kullanılmıştır. Derleme boyunca ele alınan başlıca temalar şunlardır: ŞHA 'ların termoelastik davranışı ve sönümleme kapasitesi, fiber takviyeli polimer matrislerle hibrit entegrasyon yöntemleri, gömülü ve yüzey-bağlantılı aktuatör konfigürasyonları ile gerçek zamanlı kontrol algoritmalarının kompozit sistem dinamiğine uyarlanmasıdır. Veriler, NiTi fiber konsantrasyonunun ve ön-gerinim düzeyinin sönümleme oranı üzerinde belirleyici etkiler bıraktığını ortaya koymaktadır; ancak bu ilişkilerin tam olarak ortaya konulması, deneysel protokollerdeki tutarsızlıklar nedeniyle güç görünmektedir. Termomekanik yorulma, imalat süreçlerinde faz dönüşümü bütünlüğünün korunması ve faz geçiş sıcaklıklarının çevresel değişkenlere duyarlılığı, alanın önündeki temel engeller olarak öne çıkmaktadır. Sonuç olarak, standardize edilmiş karakterizasyon protokollerinin geliştirilmesi, çok ölçekli modelleme yaklaşımlarının güçlendirilmesi ve endüstriyel ölçekte üretim uygulamalarına yönelik araştırmaların yoğunlaştırılması, alanın ilerlemesi için öncelikli yönler olarak değerlendirilmektedir.

Abstract

Shape memory alloys (SMAs), particularly nickel-titanium (NiTi) based systems, are attracting increasing interest in the field of active vibration control due to their capacity to convert heat into mechanical energy through austenite and martensitic phase transformations. This review systematically surveys and critically evaluates the published literature covering vibration damping mechanisms, applied control strategies, and current design limitations in SMA-reinforced smart composite structures. Within the scope of the survey, peer-reviewed articles, conference proceedings, and technical reports from the 1990s to the present were examined using the Web of Science, Scopus, and ScienceDirect databases; keyword combinations such as "shape memory alloy," "active vibration control," "NiTi composite," and "martensitic transformation" were utilized. The main themes covered throughout the compilation are: thermoelastic behavior and damping capacity of SHAs, hybrid integration methods with fiber-reinforced polymer matrices, embedded and surface-mounted actuator configurations, and the adaptation of real-time control algorithms to composite system dynamics. The data reveal that NiTi fiber concentration and pre-strain level have a decisive effect on the damping ratio; however, precisely elucidating these relationships seems difficult due to inconsistencies in the experimental protocols. Thermomechanical fatigue, the preservation of phase transformation integrity during manufacturing processes, and the sensitivity of phase transition temperatures to environmental variables emerge as the fundamental obstacles facing the field. Consequently, the development of standardized characterization protocols, the enhancement of multiscale modeling approaches, and the intensification of research toward industrial-scale manufacturing applications are considered priority directions for the advancement of the field.

🔖

Bu Makaleye Atıf Yap

Nazlım, O., Taşkesen, A. (2026). Şekil Hafızalı Alaşım Takviyeli Kompozit Yapılarda Aktif Titreşim Sönümleme: Teknolojiler, Mekanizmalar ve Güncel Zorluklar Üzerine Bir Derleme. Politeknik Dergisi, Cilt: 29 Sayı: 4, 1–19. https://doi.org/10.2339/politeknik.1946656

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (116)

  1. Song, G., Ma, N., & Li, H. N., "Applications of shape memory alloys in civil structures". Engineering Structures, 28(9), 1266-1274. (2006).
  2. Baz, A., Poh, S., Ro, J., & Gilheany, J. "Control of the natural frequencies of nitinol-reinforced composite beams". Journal of Sound and Vibration, 185(1), 171-185., (1995).
  3. Soong, T.T., & Spencer, B.F., "Supplemental energy dissipation: state-of-the-art and state-of-the-practice". Engineering Structures, 24(3), 243-259. (2002).
  4. Brinson, L. C., & Lammering, R., "Finite element analysis of the behavior of shape memory alloys and their applications". International Journal of Solids and Structures, 30(23), 3261-3280. (1993).
  5. Ozbulut, O. E., Hurlebaus, S., & Desroches, R., "Seismic response control using shape memory alloys: A review". Journal of Intelligent Material Systems and Structures, 22(14), 1531-1549. (2011).
  6. Saadat, S., Salichs, J., Noori, M., Hou, Z., Davoodi, H., Bar-on, I., Suzuki, Y., & Masuda, A., "An overview of vibration and seismic applications of NiTi shape memory alloy". Smart Materials and Structures, 11(2), 218-229. (2002).
  7. Lagoudas, D. C. (Ed.)., Shape memory alloys: Modeling and engineering applications. Springer., (2008).
  8. Humbeeck, J. V., "Damping capacity of thermoelastic martensite in shape memory alloys". Journal of Alloys and Compounds, 355(1-2), 58-64., (2003).
  9. Janke, L., Czaderski, C., Motavalli, M., & Ruth, J., "Applications of shape memory alloys in civil engineering structures Overview, limits and new ideas". Materials and Structures, 38(5), 578-592., (2005).
  10. Cladera, A., Weber, B., Leinenbach, C., Czaderski, C., Shahverdi, M., & Motavalli, M., "Iron-based shape memory alloys for civil engineering structures: An overview". Construction and Building Materials, 63, 281-293., (2014).
  11. Ostachowicz, W., Krawczuk, M., & Zak, A., "Dynamics and buckling of a multilayer composite plate with embedded SMA wires". Composite Structures, 48(1-3), 163-167., (2000).
  12. Otsuka, K., & Wayman, C. M. (Eds.)., Shape memory materials. Cambridge University Press. (1998).
  13. Duerig, T. W., Melton, K. N., Stöckel, D., & Wayman, C. M. (Eds.)., Engineering aspects of shape memory alloys. Butterworth-Heinemann., (1990).
  14. Miyazaki, S., & Otsuka, K., "Development of shape memory alloys". ISIJ International, 29(5), 353-377. (1989).
  15. Damanpack, A. R., Bodaghi, M., Aghdam, M. M., & Shakeri, M., "On the vibration control capability of shape memory alloy composite beams". Composite Structures, 110, 325-334., (2014).
  16. Lagoudas, D. C., Bo, Z., & Qidwai, M. A., "A unified thermodynamic constitutive model for SMA and finite element analysis of active metal matrix composites". Mechanics of Composite Materials and Structures, 3(2), 153-179., (1996).
  17. Birman, V., "Review of mechanics of shape memory alloy structures". Applied Mechanics Reviews, 50(11), 629-645., (1997).
  18. Jani, J. M., Leary, M., Subic, A., & Gibson, M. A., "A review of shape memory alloy research, applications and opportunities". Materials and Design, 56, 1078-1113., (2014).
  19. Choi, S., & Lee, J. J., "The shape control of a composite beam with embedded shape memory alloy wire actuators". Smart Materials and Structures, 7(6), 759-770. (1998).
  20. Liberati, A., Altman, D. G., Tetzlaff, J., Mulrow, C., Gøtzsche, P. C., Ioannidis, J. P. A., Clarke, M., Devereaux, P. J., Kleijnen, J., & Moher, D., "The PRISMA statement for reporting systematic reviews and meta-analyses of studies that evaluate health care interventions: Explanation and elaboration". PLOS Medicine, 6(7), e1000100. (2009).
  21. Moher, D., Liberati, A., Tetzlaff, J., & Altman, D. G., "Preferred reporting items for systematic reviews and meta-analyses: The PRISMA statement". PLOS Medicine, 6(7), e1000097., (2009).
  22. Otsuka, K., & Ren, X., "Physical metallurgy of Ti-Ni-based shape memory alloys". Progress in Materials Science, 50(5), 511-678. (2005).
  23. Firstov, G. S., Van Humbeeck, J., & Koval, Y. N., "High-temperature shape memory alloys: Some recent developments". Materials Science and Engineering: A, 378(1-2), 2-10., (2004).
  24. Huang, W. “On the selection of shape memory alloys for actuators”. Materials & Design, 1(23), 11-19, (2002).
  25. Ma, J., Karaman, I., & Noebe, R. D. “High temperature shape memory alloys”. International Materials Reviews, 5(55), 257-315, (2010).
  26. Choi, S., Lee, J. J., Seo, D. C., & Choi, S. W. “The active buckling control of laminated composite beams with embedded shape memory alloy wires”. Composite Structures, 1-4(47), 679-686, (1999).
  27. Williams, K., Chiu, G., & Bernhard, R. “Nonlinear control of a shape memory alloy adaptive tuned vibration absorber”. Journal of Sound and Vibration, 4-5(288), 1131-1155, (2005).
  28. Poon, C. K., Zhou, L. M., & Yam, L. H. “Size effect on the optimum actuation condition for SMA-composites”. Composite Structures, 1-4(66), 503-511, (2004).
  29. Helm, D., & Haupt, P. “Shape memory behaviour: Modelling within continuum thermomechanics”. International Journal of Solids and Structures, 4(40), 827-849, (2003).
  30. Ölander, A. “An electrochemical investigation of solid cadmium-gold alloys”. Journal of the American Chemical Society, 10(54), 3819-3833, (1932).
  31. Chang, L. C., & Read, T. A. “Plastic deformation and diffusionless phase changes in metals-The gold-cadmium beta phase”. Transactions of the AIME, 1(191), 47-52, (1951).
  32. Buehler, W. J., Gilfrich, J. V., & Wiley, R. C. “Effect of low-temperature phase changes on the mechanical properties of alloys near composition TiNi”. Journal of Applied Physics, 5(34), 1475-1477, (1963).
  33. Van Humbeeck, J. “Non-medical applications of shape memory alloys”. Materials Science and Engineering: A, 273-275, 134-148, (1999).
  34. Auricchio, F., & Taylor, R. L. “Shape-memory alloys: Modelling and numerical simulations of the finite-strain superelastic behavior”. Computer Methods in Applied Mechanics and Engineering, 1-2(143), 175-194, (1997).
  35. Rogers, C. A., Liang, C., & Baker, D. K. “Dynamic control concepts using shape memory alloy reinforced plates”. Smart Materials, Structures, and Mathematical Issues, Technomic Publishing, pp. 39-62, (1989).
  36. Liang, C., & Rogers, C. A. “One-dimensional thermomechanical constitutive relations for shape memory materials”. Journal of Intelligent Material Systems and Structures, 4(8), 285-302, (1997).
  37. Zheng, Y., Cui, L., & Schrooten, J. “Basic design guidelines for SMA/epoxy smart composites”. Materials Science and Engineering: A, 1-2(390), 139-143, (2005).
  38. Lexcellent, C. “Shape-Memory Alloys Handbook”. ISTE-Wiley, (2013).
  39. Lau, K. T., Ling, H. Y., & Zhou, L. M. “Low velocity impact on shape memory alloy stitched composite plates”. Smart Materials and Structures, 2(13), 364-370, (2004).
  40. Tsoi, K. A., Stalmans, R., Schrooten, J., Wevers, M., & Mai, Y. W. “Impact damage behaviour of shape memory alloy composites”. Materials Science and Engineering: A, 1-2(342), 207-215, (2003).
  41. Deng, Z., Li, L., Ghafoori, E., Taras A. “Thermal effects on the bond behavior of Fe-SMA adhesive joints: A study on temperatures from −20°C to 80°C”. Structures, 110029(80), 2352-0124, (2025).
  42. Ro, J. J., & Baz, A. “NITINOL-reinforced plates: Part II. Static and buckling characteristics”. Composites Engineering, 1(5), 79-94, (1995).
  43. Mohd Jani, J., Leary, M., & Subic, A. “Designing shape memory alloy linear actuators: A review”. Journal of Intelligent Material Systems and Structures, 13(28), 1699-1718, (2017).
  44. Baz, A., & Ro, J. “Thermo-dynamic chaacteristics of nitinol-reinforced composite beams”. Composites Engineering, 5(4), 567-578, (1994).
  45. Arghavani, J., Auricchio, F., Naghdabadi, R. and Reali, A. “On the robustness and efficiency of integration algorithms for a 3D finite strain phenomenological SMA constitutive model”. Int. J. Numer. Meth. Engng., 85: 107-134, (2011).
  46. Panico, M., & Brinson, L. C. “A three-dimensional phenomenological model for martensite reorientation in shape memory alloys”. Journal of the Mechanics and Physics of Solids, 11(55), 2491-2511, (2007).
  47. Eggeler, G., Hornbogen, E., Yawny, A., Heckmann, A., & Wagner, M. “Structural and functional fatigue of NiTi shape memory alloys”. Materials Science and Engineering: A, 1-2(378), 24-33, (2004).
  48. Lagoudas, D. C., & Entchev, P. B. “Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys”. Mechanics of Materials, 9(36), 865-892, (2004).
  49. Tobushi, H., Shimeno, Y., Hachisuka, T., & Tanaka, K. “Influence of strain rate on superelastic properties of TiNi shape memory alloy”. Mechanics of Materials, 2(30), 141-150, (1998).
  50. Hartl, D. J., & Lagoudas, D. C. “Constitutive modeling and structural analysis considering simultaneous phase transformation and plastic yield in shape memory alloys”. Smart Materials and Structures, 10(18), 104017, (2009).
  51. Lagoudas, D. C., Entchev, P. B., Popov, P., Patoor, E., Brinson, L. C., & Gao, X. “Shape memory alloys, Part II: Modeling of polycrystals”. Mechanics of Materials, 5-6(38), 430-462, (2006).
  52. Chopra, I. “Review of state of art of smart structures and integrated systems”. AIAA Journal, 11(40), 2145-2187, (2002).
  53. A. Baz, S. Poh, “ Performance of an active control system with piezoelectric actuators ”. Journal of Sound and Vibration, 2(126), 327-343, (1988).
  54. Lau, K. T., Zhou, L. M., & Tao, X. M. “Control of natural frequencies of a clamped-clamped composite beam with embedded shape memory alloy wires”. Composite Structures, 1(58), 39-47, (2002).
  55. Robertson, S. W., Pelton, A. R., & Ritchie, R. O. “Mechanical fatigue and fracture of nitinol”. International Materials Reviews, 1(57), 1-37, (2012).
  56. Sun, L., & Hwang, R. S. “Prediction of the transformation temperatures of SMA due to stress states”. Materials Science and Engineering: A, 1-2(425), 278-285, (2006).
  57. Aridogan, U., & Basdogan, I. “A review of active vibration and noise suppression of plate-like structures with piezoelectric transducers”. Journal of Intelligent Material Systems and Structures, 12(26), 1455-1476, (2015).
  58. Shu, S. G., Lagoudas, D. C., Hughes, D., & Wen, J. T. “Modeling of a flexible beam actuated by shape memory alloy wires”. Smart Materials and Structures, 3(6), 265-277, (1997).
  59. Elahinia, M. H., & Ahmadian, M. “An enhanced SMA phenomenological model: I. The shortcomings of the existing models”. Smart Materials and Structures, 6(14), 1297-1308, (2005).
  60. Baz, A., & Ro, J. “Vibration control of plates with active constrained layer damping”. Smart Materials and Structures, 3(5), 272-280, (1996).
  61. Song, G., & Ma, N. “Robust control of a shape memory alloy wire actuated flap”. Smart Materials and Structures, 6(16), N51-N59, (2007).
  62. Liu, W., Wei, H., Pang, Y., Tang, X., Wang, K., & Zhou, W. “Model Predictive Control for an SMA Actuator Based on an SGPI Model”. Aerospace, 2(13), 112, (2026).
  63. Logarzo, H. J., Capuano, G., & Rimoli, J. J. “Smart constitutive laws: Inelastic homogenization through machine learning”. Computer Methods in Applied Mechanics and Engineering, 373, 113482, (2021).
  64. Brinson, L. C. “One-dimensional constitutive behavior of shape memory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable”. Journal of Intelligent Material Systems and Structures, 2(4), 229-242, (1993).
  65. Qidwai, M. A., & Lagoudas, D. C. “Numerical implementation of a shape memory alloy thermomechanical constitutive model using return mapping algorithms”. International Journal for Numerical Methods in Engineering, 6(47), 1123-1168, (2000).
  66. Malekzadeh, K., Mozafari, A., & Ghasemi, F. A. “Free vibration response of a multilayer smart hybrid composite plate with embedded SMA wires”. Latin American Journal of Solids and Structures, 2(11), 279-298, (2014).
  67. Hartl, D. J., Mooney, J. T., Lagoudas, D. C., Calkins, F. T., & Mabe, J. H. “Use of a Ni60Ti shape memory alloy for active jet engine chevron application: II. Experimentally validated numerical analysis”. Smart Materials and Structures, 1(19), 015021, (2010).
  68. Paine, J. S. N., Rogers, C. A., & Smith, R. A. “Adaptive composite materials with shape memory alloy actuators for cylinders and pressure vessels”. Journal of Intelligent Material Systems and Structures, 2(6), 210-219, (1995).
  69. Chluba, C., Ge, W., Lima de Miranda, R., Strobel, J., Kienle, L., Quandt, E., & Wuttig, M. “Ultralow-fatigue shape memory alloy films”. Science, 6238(348), 1004-1007, (2015).
  70. Baz, A., Imam, K., & McCoy, J. “Active vibration control of flexible beams using shape memory actuators”. Journal of Sound and Vibration, 3(140), 437-456, (1990).
  71. Elahinia, M., Shayesteh Moghaddam, N., Taheri Andani, M., Amerinatanzi, A., Bimber, B. A., & Hamilton, R. F. “Fabrication of NiTi through additive manufacturing: A review”. Progress in Materials Science, 83, 630-663, (2016).
  72. Tandel, K. S., Rammohan, B., Periasamy, K., & Budarapu, P. R. “Nonlinear dynamics of nitinol-enhanced carbon-fiber-reinforced polymer beam-rod in subsonic flow.” Journal of Aircraft, 1–15, (2025).
  73. Soltanieh, G., Kabir, M. Z., & Shariyat, M. “Snap instability of shallow laminated cylindrical shells reinforced with functionally graded shape memory alloy wires”. Composite Structures, 180, 581-595, (2017).
  74. Ozbulut, O. E., & Hurlebaus, S. “Seismic assessment of bridge structures isolated with a shape memory alloy/rubber-based isolation system”. Smart Materials and Structures, 1(20), 015003, (2010).
  75. Vel, S. S., & Batra, R. C. “Generalized plane strain thermoelastic deformation of laminated anisotropic thick plates”. International Journal of Solids and Structures, 8(38), 1395-1414, (2001).
  76. Savi, M. A., & Pacheco, P. M. C. L. “Chaos and hyperchaos in shape memory systems”. International Journal of Bifurcation and Chaos, 3(12), 645-657, (2002).
  77. Andrawes, B., & DesRoches, R. “Unseating prevention for multiple frame bridges using superelastic devices”. Smart Materials and Structures, 3(14), S60-S67, (2005).
  78. Waisman, H., & Abramovich, H. “Active stiffening of laminated composite beams using piezoelectric actuators”. Composite Structures, 1(58), 109-120, (2002).
  79. Pettit, C. L. “Uncertainty quantification in aeroelasticity: Recent results and research challenges”. Journal of Aircraft, 5(41), 1217-1229, (2004).
  80. Lagoudas, D. C., & Tadjbakhsh, I. G. “Active flexible rods with embedded SMA fibers”. Smart Materials and Structures, 2(1), 162-167, (1992).
  81. Chatzigeorgiou, G., Chemisky, Y., & Meraghni, F. “Computational micro to macro transitions for shape memory alloy composites using periodic homogenization”. Smart Materials and Structures, 3(24), 035009, (2015).
  82. ASTM International. “ASTM F2516-14: Standard test method for tension testing of nickel-titanium superelastic materials”. ASTM Standards, West Conshohocken, PA, (2014).
  83. Paiva, A., & Savi, M. A. “An overview of constitutive models for shape memory alloys”. Mathematical Problems in Engineering, 2006, 56876, (2006).
  84. Loh, C. S., Yokoi, H., & Arai, T. “Natural heat-sinking control method for high-speed actuation of the SMA.” International Journal of Advanced Robotic Systems, 4(3), 303-312, (2006).
  85. Karna, P., Mani Prabu, S. S., Karthikeyan, S. C., Mithun, R., Jayachandran, S., Resnina, N., Belyaev, S., & Palani, I. A. “Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications.” Sensors and Actuators A: Physical, 321, 112411, (2021).
  86. Knick, C. R., Smith, G. L., Morris, C. J., & Bruck, H. A. “Rapid and low power laser actuation of sputter-deposited NiTi shape memory alloy (SMA) MEMS thermal bimorph actuators.” Sensors and Actuators A: Physical, 291, 48–57, (2019).
  87. Bhattacharyya, A., Lagoudas, D. C., Wang, Y. P., & Kinra, V. K. “Thermoelectric cooling of shape memory alloy actuators: theoretical modeling and experiment.” Proceedings of SPIE, 2427, 480–490, (1995).
  88. Tadesse, Y., Thayer, N., & Priya, S. “Tailoring the response time of shape memory alloy wires through active cooling and pre-stress.” Journal of Intelligent Material Systems and Structures, 1(21), 19–40, (2010).
  89. Huber, J.E., Fleck, N.A., & Ashby, M.F. “The selection of mechanical actuators based on performance indices”. Proceedings of the Royal Society A, 1965(453), 2185-2205, (1997).
  90. Bhaskar, J., Sharma, A. K., Bhattacharya, B., & Adhikari, S. “A review on shape memory alloy reinforced polymer composite materials and structures.” Smart Materials and Structures, 7(29), 073001, (2020).
  91. Rao, A., Srinivasa, A. R., & Reddy, J. N. “Design of Shape Memory Alloy (SMA) Actuators”. Springer, (2015).
  92. Ameduri, S., Brindisi, A., Tiseo, B., Concilio, A., & Pecora, R. “Optimization and integration of shape memory alloy (SMA)-based elastic actuators within a morphing flap architecture”. Journal of Intelligent Material Systems and Structures, 4(23), 381-396, (2011).
  93. Ullakko, K., Huang, J. K., Kantner, C., O'Handley, R. C., & Kokorin, V. V. “Large magnetic-field-induced strains in Ni2MnGa single crystals”. Applied Physics Letters, 11(69), 1966-1968, (1996).
  94. Patoor, E., Lagoudas, D. C., Entchev, P. B., Brinson, L. C., & Gao, X. “Shape memory alloys, Part I: General properties and modeling of single crystals”. Mechanics of Materials, 5-6(38), 391-429, (2006).
  95. Park, J. S., Kim, J. H., & Moon, S. H. “Vibration of thermally post-buckled composite plates embedded with shape memory alloy fibers”. Composite Structures, 2(63), 179-188, (2004).
  96. Petrini, L., & Migliavacca, F. “Biomedical applications of shape memory alloys”. Journal of Metallurgy, (2011, 501483, (2011).
  97. Duerig, T., Pelton, A., & Stöckel, D. “An overview of nitinol medical applications”. Materials Science and Engineering: A, 273-275, 149-160, (1999).
  98. Tandel, K. S., Bhanumurthy, R., Murthy, S., Ramaiah, K. V., & Saikrishna, C. N. “Aeroelastic stability enhancement of composite laminates using embedded pre-strained NiTi shape memory alloys.” Experimental Techniques, (2025).
  99. Zhu, S., & Zhang, Y. “Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace”. Earthquake Engineering and Structural Dynamics, 10(36), 1329-1346, (2007).
  100. Young, M. L., Wagner, M. F.-X., Frenzel, J., Schmahl, W. W., & Eggeler, G. “Phase volume fractions and strain distributions in austenitic NiTi shape memory alloys under bending”. Acta Materialia, 7(58), 2344-2354, (2010).
  101. Malekzadeh Fard, K., Gholami, M., Reshadi, F., & Livani, M. “Free vibration and buckling analyses of a sandwich beam made of a transversely flexible core with shape memory alloy wire reinforcement layers”. Journal of Sandwich Structures and Materials, 5(18), 555-578, (2016).
  102. Zhang, R. X., Ni, Q. Q., Natsuki, T., & Iwamoto, M. “Vibration characteristics of laminated composite plates with embedded shape memory alloy wires”. Composite Structures, 4(79), 588-596, (2007).
  103. Khalili, S. M. R., Botshekanan Dehkordi, M., & Carrera, E. “A nonlinear finite element model using a unified formulation for dynamic analysis of multilayer composite plate embedded with SMA wires”. Composite Structures, 106, 635-645, (2013).
  104. Payandeh, Y., Meraghni, F., Patoor, E., & Eberhardt, A. “Debonding initiation in a NiTi shape memory wire–epoxy matrix composite. Influence of martensitic transformation”. Materials and Design, 3(31), 1077-1084, (2010).
  105. Auricchio, F., Petrini, L., & Pietrabissa, R. “A three-dimensional model describing stress-temperature induced solid phase transformations: Solution algorithm and boundary value problems”. International Journal for Numerical Methods in Engineering, 7(51), 807-834, (2001).
  106. Lee, H. J., & Lee, J. J. “A numerical analysis of the buckling and postbuckling behavior of laminated composite shells with embedded shape memory alloy wire actuators”. Smart Materials and Structures, 6(9), 780-787, (2000).
  107. Dong, Z., Klotz, U.E., Leinenbach, C., Bergamini, A., Czaderski, C., & Motavalli, M. “A novel Fe-Mn-Si shape memory alloy with improved shape recovery properties by VC precipitation”. Advanced Engineering Materials, 1-2(11), 40-44, (2009).
  108. Ewins, D.J. “Modal Testing: Theory, Practice and Application (2nd ed.)”. Research Studies Press, Baldock, Hertfordshire. ISBN 0-86380-218-4, (2000).
  109. Cisse, C., Zaki, W., & Ben Zineb, T. “A review of constitutive models and modeling techniques for shape memory alloys”. International Journal of Plasticity, 76, 244-284, (2016).
  110. Paine, J. S. N., & Rogers, C. A. “The response of SMA hybrid composite materials to low velocity impact”. Journal of Intelligent Material Systems and Structures, 4(5), 530-535, (1994).
  111. Turner, T. L. “Thermomechanical response of shape memory alloy hybrid composites”. NASA Technical Memorandum, TM-2001-210656, (2001).
  112. ASTM International. ASTM E756-05 Standard Test Method for Measuring Vibration-Damping Properties of Materials. West Conshohocken, PA, (2017).
  113. Fu, Y. Q., Du, H. J., & Zhang, S. “Functionally graded TiN/TiNi shape memory alloy films”. Materials Letters, 20(57), 2995-2999, (2003).
  114. Evangelista, V., Marfia, S., & Sacco, E. “Phenomenological 3D and 1D consistent models for shape-memory alloy materials”. Computational Mechanics, 3(44), 405-421, (2009).
  115. Bachmann, F., de Oliveira, R., Sigg, A., Schnyder, V., Delpero, T., Jaehne, R., Bergamini, A., Michaud, V., & Ermanni, P. “Passive damping of composite blades using embedded piezoelectric modules or shape memory alloy wires: a comparative study.” Smart Materials and Structures, 7(21), 075027, (2012).
  116. Wei, S., Zhang, J., Zhang, L., Zhang, Y., Liu, Y., Yao, X., Sun, L., Ngan, A.H.W., & Wang, L. “Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a review.” International Journal of Extreme Manufacturing, 3(5), 032001, (2023).