Dergiler / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2020 / Cilt: 22 - Sayı: 66

Electrodeposition of copper (II) sulfide and zinc sulfide onto polycrystalline gold electrode

Sayfa
769–779
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In this way, an electrodeposition-based method for CuS and ZnS semiconductors in a comparable basis was improved on polycrystalline gold substrate.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:An electrodeposition-based process was developed in this work.
📊
Temel Bulgular & Veri:The deposition potentials of copper (Cu), zinc (Zn) and sulfur (S) were defined separately by cyclic voltammetry.
💡
Sonuç & Katkı:In this way, an electrodeposition-based method for CuS and ZnS semiconductors in a comparable basis was improved on polycrystalline gold substrate.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:bakır · çinko · potansiyel altı depozisyonu

Özet

An electrodeposition-based process was developed in this work. Electrochemical atomic layer epitaxy (ECALE) and co-deposition methodologies were employed to grow copper (II) sulfide (CuS) and zinc sulfide (ZnS) thin films as photovoltaic semiconductors on polycrystalline gold electrode. The deposition potentials of copper (Cu), zinc (Zn) and sulfur (S) were defined separately by cyclic voltammetry. Thin films were created from an electrolyte containing copper (II) sulfate (CuSO4), sodium sulfur (Na2S) and zinc sulfate (ZnSO4) in ethylenediaminetetraacetic acid (EDTA) using both cyclic voltammetry and bulk electrolysis techniques. The influence of bath temperature at the deposition potential was studied to determine the crystallinity of deposits. From the chronoamperometry results including the transients obtained within the under potential region, the nucleation and growth process of deposits were estimated. In this way, an electrodeposition-based method for CuS and ZnS semiconductors in a comparable basis was improved on polycrystalline gold substrate.

Abstract

An electrodeposition-based process was developed in this work. Electrochemical atomic layer epitaxy (ECALE) and co-deposition methodologies were employed to grow copper (II) sulfide (CuS) and zinc sulfide (ZnS) thin films as photovoltaic semiconductors on polycrystalline gold electrode. The deposition potentials of copper (Cu), zinc (Zn) and sulfur (S) were defined separately by cyclic voltammetry. Thin films were created from an electrolyte containing copper (II) sulfate (CuSO4), sodium sulfur (Na2S) and zinc sulfate (ZnSO4) in ethylenediaminetetraacetic acid (EDTA) using both cyclic voltammetry and bulk electrolysis techniques. The influence of bath temperature at the deposition potential was studied to determine the crystallinity of deposits. From the chronoamperometry results including the transients obtained within the under potential region, the nucleation and growth process of deposits were estimated. In this way, an electrodeposition-based method for CuS and ZnS semiconductors in a comparable basis was improved on polycrystalline gold substrate.

🔖

Bu Makaleye Atıf Yap

SÜRÜCÜ, Ö., ABACI, S. (2020). Electrodeposition of copper (II) sulfide and zinc sulfide onto polycrystalline gold electrode. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 22 - Sayı: 66, 769–779. https://ajindex.com/articles/157366

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Oviedo, O.A., Reinaudi, L., Garcia, S.G., Leiva, E.P.M. 2016. Underpotential deposition: from fundamentals and theory to applications at the nanoscale. Scholz F., ed. Springer International Publishing, Switzerland. DOI: 10.1007/s10008-016-3222-7
  2. Mascaro, L.H., Santos, M.C., Machado, S.A.S., Avaca, L.A. 2002. Voltammetric and Rotating Ring-Disk Studies of the Influence of Anions in the Underpotential Deposition of Zinc on Platinum. Journal of the Brazilian Chemical Society, Vol. 13, p. 529-534. DOI: 10.1590/S0103-50532002000400019
  3. Gregory, B.W., Stickney, J.L. 1991. Electrochemical atomic layer epitaxy (ECALE). Journal of Electroanalytical Chemistry, Vol. 300, p. 543-561. DOI: 10.1016/0022-0728(91)85415-L
  4. Liang, X., Jayaraju, N., Thambidurai, C., Zhang, Q., Stickney, J.L. 2011. Controlled elec-trochemical formation of GexSbyTez using atomic layer deposition (ALD). Chemistry of Materials, Vol. 23, p. 1742-1752. DOI: 10.1021/cm102672j
  5. Öznülüer, T., Erdoğan, İ.Y., Şişman, İ., Demir, Ü. 2005. Electrochemical atom-by-atom growth of PbS by modified ECALE method. Chemistry of Materials, Vol. 17, p. 935-937. DOI: 10.1021/cm048246g
  6. Zhu, W., Liu, X., Liu, H., Tong, D., Yang, J., Peng, J. 2010. Coaxial heterogeneous structure of TiO2 nanotube arrays with CdS as a superthin coating synthesized via modified electrochemical atomic layer deposition. Journal of the American Chemical Society, Vol. 132, p. 12619-12626. DOI: 10.1021/ja1025112
  7. Noyhouzer, T., Mandler, D. 2011. Determination of low levels of cadmium ions by the under potential deposition on a self-assembled monolayer on gold electrode. Analytica Chimica Acta, Vol. 684, p. 1-7. DOI: 10.1016/j.aca.2010.10.021
  8. Aramataa, A., Taguchi, S., Fukudaa, T., Nakamuraa, M., Horanyi, G. 1998. Underpotential deposition of zinc ions at single crystal electrodes and the effect of the adsorbed anions. Electrochimica Acta, Vol. 44, p. 999-1007. DOI: 10.1016/S0013-4686(98)00204-7
  9. Giaccherini, A., Cinotti, S., Guerri, A., Carla, F., Montegrossi, G., Vizza, F., Lavacchi, A., Felici, R., Di Benedetto, F., Innocenti, M. 2017. Operando SXRD study of the structure and growth process of Cu 2 S ultra-thin films. Scientific Reports, Vol. 7, p. 1615. DOI: 10.1038/s41598-017-01717-0
  10. Bozzini, B., Baker, M.A., Cavallotti, P.L., Cerri, E., Lenardi, C. 2000. Electrodeposition of ZnTe for Photovoltaic Cells. Thin Solid Films, Vol. 361, p. 388-395. DOI: 10.1016/S0040-6090(99)00808-1
  11. Pauporte,