KaydedilenlerDerginizi ekleyin

Dergiler / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2026 / Cilt: 26 Sayı: 5

Kür Koşullarına Bağlı Olarak Kolemanit ve Kurşun Katkılı Kendiliğinden Yerleşen Alkali Aktive Harçların Performansı

Performance of Colemanite and Lead-Added Self-Compacting Alkali-Activated Mortars Depending on Curing Conditions

Sibel Sağlıyan(Fırat Üniversitesi)0000-0002-4895-9486
Sayfa
1102–1114
Yayın Tarihi
2026-10-06
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Mekanik deneyler, kür sıcaklığı ve süresinin hem eğilme hem de basınç dayanımı üzerinde belirleyici olduğunu ortaya koymuştur.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, uçucu kül (UK) esaslı kendiliğinden yerleşen alkali aktive harçlarda kolemanit (KO) ve kurşun tozu (KU) ikamesinin farklı kür sıcaklığı ve süreleri altında taze ve mekanik özelliklere etkisi araştırılmıştır.
📊
Temel Bulgular & Veri:Harçlar, uçucu külün yerine kütlece %10 KO, %10 KU ve %5 KO + %5 KU ikame edilerek hazırlanmış, 14 M NaOH ve Na₂SiO₃ çözeltileri ile aktive edilmiştir.
💡
Sonuç & Katkı:Mekanik deneyler, kür sıcaklığı ve süresinin hem eğilme hem de basınç dayanımı üzerinde belirleyici olduğunu ortaya koymuştur.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Kendiliğinden yerleşen harç · Alkali aktivite harç · Kür sıcaklığı

Özet

Bu çalışmada, uçucu kül (UK) esaslı kendiliğinden yerleşen alkali aktive harçlarda kolemanit (KO) ve kurşun tozu (KU) ikamesinin farklı kür sıcaklığı ve süreleri altında taze ve mekanik özelliklere etkisi araştırılmıştır. Harçlar, uçucu külün yerine kütlece %10 KO, %10 KU ve %5 KO + %5 KU ikame edilerek hazırlanmış, 14 M NaOH ve Na₂SiO₃ çözeltileri ile aktive edilmiştir. Numuneler 30, 60 ve 90 °C sıcaklıklarda 4, 8 ve 24 saat süreyle kürlenmiştir. Mini çökme-yayılma deneyleri, kolemanit katkısının akışkanlığı azaltarak yayılma çapını 24,6 cm'ye düşürdüğünü, kurşun tozu katkısının ise 26,0 cm ile referans karışımla aynı yayılma değerini sağladığını göstermiştir. KO5KU5 karışımı 25,0 cm yayılma çapı ile ara bir davranış sergilemiştir. Mekanik deneyler, kür sıcaklığı ve süresinin hem eğilme hem de basınç dayanımı üzerinde belirleyici olduğunu ortaya koymuştur. En yüksek dayanımlar tüm karışımlarda 90 °C'de 24 saat kür uygulanan numunelerde elde edilmiştir. Bu koşulda referans karışım 7,16 MPa eğilme ve 32,57 MPa basınç dayanımı gösterirken, KO10 karışımında bu değerler sırasıyla 6,21 MPa ve 28,17 MPa, KU10 karışımında ise 6,94 MPa ve 30,47 MPa olarak belirlenmiştir. KO5KU5 karışımı her iki dayanım türünde referans ile tekli katkılı karışımlar arasında yer almıştır. Sonuçlar, uygun kür sıcaklığı ve süresinin alkali aktive harçların mekanik performansını önemli ölçüde artırdığını, kurşun tozunun kolemanite göre mekanik özellikleri daha sınırlı düzeyde etkilediğini ve KO ile KU'nun birlikte kullanımının dengeli bir performans sağladığını göstermektedir.

Abstract

In this study, the effect of colemanite (KO) and lead powder (KU) substitution in fly ash (FA)-based self-compacting alkali-activated mortars on fresh and mechanical properties was investigated under different curing temperatures and durations. The mortars were prepared by replacing fly ash with 10% by mass KO, 10% KU, and 5% KO + 5% KU, and were activated with 14 M NaOH and Na₂SiO₃ solutions. The specimens were cured at temperatures of 30, 60, and 90 °C for 4, 8, and 24 hours, respectively. Mini slump-spread tests showed that the colemanite additive reduced flowability, lowering the spread diameter to 24.6 cm, while the lead powder additive yielded a spread value of 26.0 cm, identical to that of the reference mixture. The KO5KU5 mixture exhibited intermediate behavior with a spread diameter of 25.0 cm. Mechanical tests revealed that curing temperature and duration were decisive factors for both flexural and compressive strength. The highest strengths were obtained in specimens from all mixtures cured at 90 °C for 24 hours. Under these conditions, the reference mixture exhibited a flexural strength of 7.16 MPa and a compressive strength of 32.57 MPa, while these values were determined to be 6.21 MPa and 28.17 MPa, respectively, for the KO10 mixture, and 6.94 MPa and 30.47 MPa for the KU10 mixture. The KO5KU5 mixture ranked between the reference and single-additive mixtures in both types of strength. The results show that appropriate curing temperature and duration significantly improve the mechanical performance of alkali-activated mortars, that lead powder affects mechanical properties to a more limited extent compared to colemanite, and that the combined use of KO and KU provides balanced performance.

🔖

Bu Makaleye Atıf Yap

Sağlıyan, S. (2026). Kür Koşullarına Bağlı Olarak Kolemanit ve Kurşun Katkılı Kendiliğinden Yerleşen Alkali Aktive Harçların Performansı. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 26 Sayı: 5, 1102–1114. https://doi.org/10.35414/akufemubid.1856059

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (60)

  1. Abiodun, Y. O., Olanrewaju, O. A., Gbenebor, O. P., Ochulor, E. F., Obasa, D. V., & Adeosun, S. O. (2022). Cutting Cement Industry CO2 Emissions through Metakaolin Use in Construction. Atmosphere, 13(9), 1494. https://doi.org/10.3390/atmos13091494
  2. Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021). Fly ash-based eco-friendly geopolymer concrete: A critical review of the long-term durability properties. Construction and Building Materials, 270, 121857. https://doi.org/10.1016/j.conbuildmat.2020.121857
  3. Arslan, A. A., Uysal, M., Yılmaz, A., Al-mashhadani, M. M., Canpolat, O., Şahin, F., & Aygörmez, Y. (2019). Influence of wetting-drying curing system on the performance of fiber reinforced metakaolin-based geopolymer composites. Construction and Building Materials, 225, 909–926. https://doi.org/10.1016/j.conbuildmat.2019.07.235
  4. ASTM C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars. (2002).
  5. ASTM C349-02 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure). (2002).
  6. ASTM C618. (2023). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. https://doi.org/10.1520/C0618-22
  7. Aygörmez, Y., Canpolat, O., & Al-mashhadani, M. M. (2020). Assessment of geopolymer composites durability at one year age. Journal of Building Engineering, 32, 101453. https://doi.org/10.1016/j.jobe.2020.101453
  8. Benabed, B., Kadri, E. H., Azzouz, L., & Kenai, S. (2012). Properties of self-compacting mortar made with various types of sand. Cement and Concrete Composites, 34(10), 1167–1173. https://doi.org/10.1016/J.CEMCONCOMP.2012.07.007
  9. Benli, A. (2019). Mechanical and durability properties of self-compacting mortars containing binary and ternary mixes of fly ash and silica fume. Structural Concrete, 20(3), 1096–1108. https://doi.org/10.1002/SUCO.201800302
  10. Chen, L., Wang, Z., Wang, Y., & Feng, J. (2016). Preparation and properties of alkali activated metakaolin-based geopolymer. Materials, 9(9), 1–12. https://doi.org/10.3390/ma9090767
  11. Davidovits, J. (2011). Geopolymer Chemistry and Applications (3rd ed.) (3rd ed.).
  12. Davidovits, J. (2013). Geopolymer Cement a review. Geopolymer Science and Technics, (0), 1–11.
  13. Deb, P. S., Nath, P., & Sarker, P. K. (2013). Properties of fly ash and slag blended geopolymer concrete cured at ambient temperature. ISEC 2013 - 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction, 571–576. https://doi.org/10.3850/978-981-07-5354-2-M-55-433
  14. Deja, J. (2002). Immobilization of Cr 6+, Cd 2+, Zn 2+ and Pb 2+ in alkali-activated slag binders. https://doi.org/10.1016/S0008-8846(02)00904-3
  15. Demie, S., Nuruddin, M. F., Ahmed, M. F., & Shafiq, N. (2011). Effects of curing temperature and superplasticizer on workability and compressive strength of self-compacting geopolymer concrete. 2011 National Postgraduate Conference - Energy and Sustainability: Exploring the Innovative Minds, NPC 2011, 1-5. https://doi.org/10.1109/NATPC.2011.6136362
  16. Dhadse, S., Kumari, P., & Bhagia, L. J. (2008). Fly ash characterization, utilization and government initiatives in India - A review. Journal of Scientific and Industrial Research, 67(1), 11–18.
  17. Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007). Geopolymer technology: the current state of the art. Journal of Materials Science, 42(9), 2917–2933. https://doi.org/10.1007/s10853-006-0637-z
  18. Erdogmus, E. (2014). Combined effect of waste colemanite and silica fume on properties of cement mortar. Science and Engineering of Composite Materials, 21(3), 369–375. https://doi.org/10.1515/secm-2013-0041
  19. Gencel, O., Brostow, W., Özel, C., & Filiz, M. (2010). An investigation on the concrete properties containing colemanite. International Journal of Physical Sciences, 5(3), 216-225.
  20. Ghafoor, M. T., & Fujiyama, C. (2022). Performance of Superplasticizers in Alkaline Environment of Self Compacting Geopolymer Mortar. Journal of Advanced Concrete Technology, 20(11), 676–690. https://doi.org/10.3151/jact.20.676
  21. Ghafoor, M. T., Fujiyama, C., & Maekawa, K. (2022). Hardened Mechanical Properties of Self Compacting Geopolymer Mortar. Journal of Advanced Concrete Technology, 20(4), 287–299. https://doi.org/10.3151/jact.20.287
  22. Ghafoor, M. T., Khan, Q. S., Qazi, A. U., Sheikh, M. N., & Hadi, M. N. S. (2021a). Influence of alkaline activators on the mechanical properties of fly ash based geopolymer concrete cured at ambient temperature. Construction and Building Materials, 273, 121752. https://doi.org/10.1016/j.conbuildmat.2020.121752
  23. Ghafoor, M. T., Khan, Q. S., Qazi, A. U., Sheikh, M. N., & Hadi, M. N. S. (2021b). Influence of alkaline activators on the mechanical properties of fly ash based geopolymer concrete cured at ambient temperature. Construction and Building Materials, 273, 121752. https://doi.org/10.1016/J.CONBUILDMAT.2020.121752
  24. Ghosh, R., Sagar, S. P., Kumar, A., Gupta, S. K., & Kumar, S. (2018). Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser. Journal of Building Engineering, 16(August 2017), 39–44. https://doi.org/10.1016/j.jobe.2017.12.009
  25. Glasser, F. P. (1997). Fundamental aspects of cement solidification and stabilisation. Journal of Hazardous Materials, 52(2–3), 151–170. https://doi.org/10.1016/S0304-3894(96)01805-5
  26. Gök S G; Şengül Ö. (2023). Geopolimer Üretiminde Atık Cam Kullanımı. Beton 2023, 588–597.
  27. Gok, S. G., & Sengul, O. (2023). Mechanical properties of alkali-activated slag based SIFCON incorporating waste steel fibers and waste glass. Construction and Building Materials, 408, 133697. https://doi.org/10.1016/j.conbuildmat.2023.133697
  28. Gülşan, M. E., Alzeebaree, R., Rasheed, A. A., Niş, A., & Kurtoğlu, A. E. (2019a). Development of fly ash/slag based self-compacting geopolymer concrete using nano-silica and steel fiber. Construction and Building Materials, 211, 271–283. https://doi.org/10.1016/j.conbuildmat.2019.03.228
  29. Gülşan, M. E., Alzeebaree, R., Rasheed, A. A., Niş, A., & Kurtoğlu, A. E. (2019b). Development of fly ash/slag based self-compacting geopolymer concrete using nano-silica and steel fiber. Construction and Building Materials, 211, 271–283. https://doi.org/10.1016/J.CONBUILDMAT.2019.03.228
  30. Hekimoğlu, G., Nas, M., Ouikhalfan, M., Sarı, A., Kurbetci, Ş., Tyagi, V. V., Sharma, R. K., & Saleh, T. A. (2021). Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material. Construction and Building Materials, 274. https://doi.org/10.1016/j.conbuildmat.2020.122105
  31. Henigal, A. M., Sherif, M. A., & Hassan, H. H. (2017a). Study on Properties of Self-Compacting Geopolymer Concrete. IOSR Journal of Mechanical and Civil Engineering, 14(02), 52–66. https://doi.org/10.9790/1684-1402075266
  32. Henigal, A. M., Sherif, M. A., & Hassan, H. H. (2017b). Study on Properties of Self-Compacting Geopolymer Concrete. IOSR Journal of Mechanical and Civil Engineering, 14(02), 52–66. https://doi.org/10.9790/1684-1402075266
  33. Khater, H. M., & Ghareib, M. (2020). Optimization of geopolymer mortar incorporating heavy metals in producing dense hybrid composites. Journal of Building Engineering, 32. https://doi.org/10.1016/j.jobe.2020.101684
  34. Kontopoulos, A., K. K. and A. X. (1996). Environmental characterization of lead smelter slag in Lavrion. In Proceedings of the IMM Minerals Metals and the Environment II Conference, 3–6.
  35. Kula, I., Olgun, A., Erdogan, Y., & Sevinc, V. (2001). Effects of colemanite waste, cool bottom ash, and fly ash on the properties of cement. Cement and Concrete Research, 31(3), 491–494. https://doi.org/10.1016/S0008-8846(00)00486-5
  36. Liu, R. xin, & Poon, C. sun. (2016). Effects of red mud on properties of self-compacting mortar. Journal of Cleaner Production, 135, 1170–1178. https://doi.org/10.1016/J.JCLEPRO.2016.07.052
  37. Manjunath, R., & Ranganath, R. V. (2019). Performance Evaluation of Fly-ash based Self-compacting geopolymer concrete mixes. IOP Conference Series: Materials Science and Engineering, 561(1). https://doi.org/10.1088/1757-899X/561/1/012006
  38. Meesala, C. R., Verma, N. K., & Kumar, S. (2020). Critical review on fly-ash based geopolymer concrete. Structural Concrete, 21(3), 1013–1028. https://doi.org/10.1002/suco.201900326
  39. Memon, F. A., Nuruddin, M. F., & Shafiq, N. (2013). Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete. International Journal of Minerals, Metallurgy and Materials, 20(2), 205–213. https://doi.org/10.1007/s12613-013-0714-7
  40. Milasi, S. E., Mostofinejad, D., & Bahmani, H. (2023). Improving the resistance of ultra-high-performance concrete against nuclear radiation: Replacing cement with barite, hematite, and lead powder. Developments in the Built Environment, 15, 100190. https://doi.org/10.1016/j.dibe.2023.100190
  41. N.B. Milestone. (2006). Reactions in cement encapsulated nuclear wastes: Need for toolbox of different cement types. Advances in Applied Ceramics, 105(1), 13–20.
  42. Özen, S., Durgun, M. Y., Kobya, V., Karakuzu, K., & Mardani-Aghabaglou, A. (2022). Effect of Colemanite Ore Wastes Utilization on Fresh Properties and Compressive Strength of Cementitious Systems. Arabian Journal for Science and Engineering, 47(10), 12873–12887. https://doi.org/10.1007/s13369-022-06641-8
  43. Palomo, A., & López dela Fuente, J. I. (2003). Alkali-activated cementitous materials: Alternative matrices for the immobilisation of hazardous wastes. Cement and Concrete Research, 33(2), 281–288. https://doi.org/10.1016/S0008-8846(02)00963-8
  44. Palomo, A., & Palacios, M. (2003). Alkali-activated cementitious materials: Alternative matrices for the immobilisation of hazardous wastes. Cement and Concrete Research, 33(2), 289–295. https://doi.org/10.1016/S0008-8846(02)00964-X
  45. Pradhan, P., Panda, S., Kumar Parhi, S., & Kumar Panigrahi, S. (2022). Factors affecting production and properties of self-compacting geopolymer concrete – A review. Construction and Building Materials, 344(June), 128174. https://doi.org/10.1016/j.conbuildmat.2022.128174
  46. Rovnaník, P. (2010a). Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer. Construction and Building Materials, 24(7), 1176–1183. https://doi.org/10.1016/j.conbuildmat.2009.12.023
  47. Rovnaník, P. (2010b). Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer. Construction and Building Materials, 24(7), 1176–1183. https://doi.org/10.1016/j.conbuildmat.2009.12.023
  48. Saedi, A., Jamshidi-Zanjani, A., Mohseni, M., Khodadadi Darban, A., & Nejati, H. (2023). Mechanical activation of lead–zinc mine tailings as a substitution for cement in concrete construction. Construction and Building Materials, 364, 129973. https://doi.org/10.1016/j.conbuildmat.2022.129973
  49. Sahin, F., Uysal, M., Canpolat, O., Cosgun, T., & Dehghanpour, H. (2021). The effect of polyvinyl fibers on metakaolin-based geopolymer mortars with different aggregate filling. Construction and Building Materials, 300(July), 124257. https://doi.org/10.1016/j.conbuildmat.2021.124257
  50. Sajan, P., Jiang, T., Lau, C., Tan, G., & Ng, K. (2021). Combined effect of curing temperature, curing period and alkaline concentration on the mechanical properties of fly ash-based geopolymer. Cleaner Materials, 1, 100002. https://doi.org/10.1016/j.clema.2021.100002
  51. Sevim, U. K. (2011a). Colemanite ore waste concrete with low shrinkage and high split tensile strength. Materials and Structures/Materiaux et Constructions, 44(1), 187–193. https://doi.org/10.1617/s11527-010-9618-4
  52. Sevim, U. K. (2011b). Colemanite ore waste concrete with low shrinkage and high split tensile strength. Materials and Structures/Materiaux et Constructions, 44(1), 187–193. https://doi.org/10.1617/s11527-010-9618-4
  53. Van Jaarsveld, J. G. S., & Van Deventer, J. S. J. (1999). The effect of metal contaminants on the formation and properties of waste-based geopolymers. In Cement and Concrete Research 29(8), 1189-1200
  54. Wan, X., Shen, C., Wang, P., Zhao, T., & Lu, Y. (2020). A study on fracture toughness of ultra-high toughness geopolymer composites based on Double-K Criterion. Construction and Building Materials, 251, 118851. https://doi.org/10.1016/j.conbuildmat.2020.118851
  55. Wiyono, D., Antoni, P., & Hardjito, D. (2015). Improving the durability of pozzolan concrete using alkaline solution and geopolymer coating. Procedia Engineering, 125, 747–753. https://doi.org/10.1016/j.proeng.2015.11.121
  56. Yön, M. Ş., & Karataş, M. (2022). Evaluation of the mechanical properties and durability of self-compacting alkali-activated mortar made from boron waste and granulated blast furnace slag. Journal of Building Engineering, 61(September), 1–19. https://doi.org/10.1016/j.jobe.2022.105263
  57. Yön, M. Ş., Yön, B., Karataş, M., & Benli, A. (2024). Sustainable use of boron waste and volcanic scoria in slag-based self-compacting alkali-activated mortars: Fresh, mechanical and durability properties. Sustainable Chemistry and Pharmacy, 41, 101664. https://doi.org/10.1016/j.scp.2024.101664
  58. Zarina, Y., Al Bakri Abdullah, M.M., Kamarudin, H., Khairul Nizar, I.,&Abd Razak, R. (2013). Reviews on the geopolymer materials for coating application. Advanced Materials Research, 626, 958–962.
  59. Deja, J. (2002). Immobilization of Cr 6+, Cd 2+, Zn 2+ and Pb 2+ in alkali-activated slag binders. https://doi.org/10.1016/S0008-8846(02)00904-3
  60. Kontopoulos, A., K. K. and A. X. (1996). Environmental characterization of lead smelter slag in Lavrion. In Proceedings of the IMM Minerals Metals and the Environment II Conference, 3–6.