Dergiler / Politeknik Dergisi / 2026 / Cilt: 11 Sayı: 2

Effect of Stacking Sequences on Failure Behavior of Pinned E-Glass/Epoxy Composite Plates

Sayfa
147–151
Yayın Tarihi
2008-06-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated.
📊
Temel Bulgular & Veri:The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6.
💡
Sonuç & Katkı:Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens.
🔬Tür:Makale
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Failure analysis · Laminated composite · Pin joints

Özet

In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated. The laminated composite plates were made from epoxy matrix and glass fibers as reinforcement material. To observe the influences of joint geometry and stacking sequence on the failure mechanism, failure analysis were carried out experimentally. The nine different laminated composite plates were tested. The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6. Besides, the specimen width-to-hole diameter ratio (W/D) was only considered as 6. Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens.

Abstract

In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated. The laminated composite plates were made from epoxy matrix and glass fibers as reinforcement material.To observe the influences of joint geometry and stacking sequence on the failure mechanism, failure analysis were carried out experimentally. The nine different laminated composite plates were tested. The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6. Besides, the specimen width-to-hole diameter ratio (W/D) was only considered as 6. Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens

🔖

Bu Makaleye Atıf Yap

Şen, F., Pakdil, M. (2008). Effect of Stacking Sequences on Failure Behavior of Pinned E-Glass/Epoxy Composite Plates. Politeknik Dergisi, Cilt: 11 Sayı: 2, 147–151. https://ajindex.com/articles/1303087

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...