Journals / Politeknik Dergisi / 2026 / Cilt: 11 Sayı: 2

Effect of Stacking Sequences on Failure Behavior of Pinned E-Glass/Epoxy Composite Plates

Pages
147–151
Publication Date
2008-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated.
📊
Key Findings & Data:The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6.
💡
Conclusion & Impact:Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Failure analysis · Laminated composite · Pin joints

Abstract

In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated. The laminated composite plates were made from epoxy matrix and glass fibers as reinforcement material.To observe the influences of joint geometry and stacking sequence on the failure mechanism, failure analysis were carried out experimentally. The nine different laminated composite plates were tested. The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6. Besides, the specimen width-to-hole diameter ratio (W/D) was only considered as 6. Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens

Özet

In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated. The laminated composite plates were made from epoxy matrix and glass fibers as reinforcement material. To observe the influences of joint geometry and stacking sequence on the failure mechanism, failure analysis were carried out experimentally. The nine different laminated composite plates were tested. The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6. Besides, the specimen width-to-hole diameter ratio (W/D) was only considered as 6. Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens.

🔖

Cite This Article

Şen, F., Pakdil, M. (2008). Effect of Stacking Sequences on Failure Behavior of Pinned E-Glass/Epoxy Composite Plates. Politeknik Dergisi, Cilt: 11 Sayı: 2, 147–151. https://ajindex.com/articles/1303087

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...