Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightSon yıllarda geliştirilen yeni üretim metotları ile tabakalı kompozit yapıların kullanım alanları dikkate
📌 3 Maddede Bu Makale
Özet
Son yıllarda geliştirilen yeni üretim metotları ile tabakalı kompozit yapıların kullanım alanları dikkate
Abstract
With the new manufactured methods developed in recent years, the application areas of layered composite structures have increased considerably. In order to increase the utilization performances of these structures, hybrid composite structures were obtained by using single fabrics in different sequences. While many studies have been carried out on the mechanical properties of layered hybrid composite structures, studies on dynamic properties are not enough. In the scope of this work, samples with 4 layers with 4 different sequence were manufactured by using VARTM (Vacuum Assisted Resin Transfer Moulding) method using single glass (G4) and single carbon (C4) fibers. These samples are either single composite structures consisting of simple glass (C4) and plain carbon (K4) or symmetric composites with different order of arrangements of these two fibers within the same structure (CGGC and GCCG). Samples were cut from produced composite sheets for three point bending, tensile and vibration tests according to the relevant ASTM standards. With three point bending tests determined the maximum flexural strength of the samples. Tensile tests were performed to determine the young modulus of the samples. In addition, natural frequency and damping ratio values were determined by free vibration analysis under fixed-free boundary conditions. With the obtained results, the effect of sequence of interply hybrid composite structures on the maximum flexural strength, the modulus of elasticity and vibrational properties was investigated.