Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightÖzellikle aktif karbonların 5-10 Å aralığındaki ultra mikro gözenek hacmi ile H2 kapasitesi arasında belirleme katsayısı (R2) 0.999 gibi oldukça yüksek bir doğrusal ilişki tespit edilmiştir.
📌 3 Maddede Bu Makale
Özet
Bu çalışmada, artan küresel enerji gereksinimi ve çevre kirliliğine karşı temiz bir enerji kaynağı olarak hidrojenin verimli bir şekilde depolanması için Zonguldak kömüründen farklı gözenek ve yüzey özelliklerine sahip aktif karbonların geliştirilmesi ve optimizasyonu yapılmıştır. Deneysel aşamada, kül içeriği giderilen kömür numunesi H3PO4 ile impregne edilerek 800°C ve 900°C sıcaklıklarda N2 ve N2-H2O buharı altında iki farklı yöntemle aktivasyon işlemi ile aktif karbonlar üretilmiştir. Elde edilen sonuçlara göre, H2O buharı aktivasyonunun yüzey alanı ve gözenek özelliklerinin geliştirmede etkili bir yöntem olduğu göstermiştir. En yüksek BET yüzey alanı ve mikro gözenek hacmi H900-H2O numunesinde elde edilmiştir. 77 K ve 1 atm’de H2 depolama kapasitesi ağırlıkça %1.58 ile H900-H2O numunesinde elde edilmiştir. H2 adsorpsiyonunun yüzey alanı ve mikro gözenek boyutları ile arasındaki korelasyon çalışmalarına göre, H2 adsorpsiyon kapasitesinin BET yüzey alınından ziyade belirli gözenek boyutlarıyla ilişkili olduğunu belirlenmiştir. Özellikle aktif karbonların 5-10 Å aralığındaki ultra mikro gözenek hacmi ile H2 kapasitesi arasında belirleme katsayısı (R2) 0.999 gibi oldukça yüksek bir doğrusal ilişki tespit edilmiştir. Sonuç olarak, kömürlere uygulanan hibrit (fiziksel ve kimyasal) aktivasyon yönteminin, H2 depolama için ideal olan ultra mikro gözenekli yapının oluşturulmasında son derece etkili olduğu sonucuna varılmıştır. Elde edilen H2 adsorpsiyon sonuçlarının literatürdeki COF-102, ZIF-8 ve MOF-5 gibi bazı gelişmiş gözenekli yapılar ile rekabet edebildiği belirlenmiştir.
Abstract
In this study, the development and optimization of activated carbons with varying pore and surface properties derived from Zonguldak coal were conducted to efficiently store hydrogen as a clean energy source, addressing the increasing global energy demand and environmental pollution. In the experimental section, activated carbons were produced by impregnating coal samples with ash content removed using H3PO4, and then activating them at 800°C and 900°C under N2 and N2-H2O vapor, using two different methods. According to the results, H2O vapor activation was shown to be an effective method for improving surface area and pore properties. The highest BET surface area and micropore volume were obtained in the H900-H2O sample. The H2 storage capacity at 77 K and 1 atm was obtained in the H900-H2O sample, which contained 1.58% by weight of H2. According to the correlation studies between H2 adsorption and surface area and micropore size, it was determined that the H2 adsorption capacity is related to specific pore sizes rather than the BET surface area. Specifically, a very high linear relationship of correlation coefficient (R2) 0.999 was found between the ultra-micropore volume (5-10 Å range) of activated carbons and their H2 capacity. Consequently, it was concluded that the hybrid (physical and chemical) activation method applied to coals is highly effective in creating the ultra-micropore structure ideal for H2 storage. It was determined that the obtained H2 adsorption results were competitive with those of some advanced porous structures reported in the literature, such as COF-102, ZIF-8, and MOF-5.