Journals / Education Sciences / 2015 / Cilt: 10 Sayı: 2

-

BOYUT ANALİZİ VE ÖĞRETİMİ

Pages
100–112
Publication Date
2015-04-07
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is suggested that instruction through lecturing should be supported with writing to learn in order to make contributions to the instruction of dimensional analysis at an anticipated level, so an approach which will be performed in seven steps is recommended.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study was conducted to explore how to teach dimensional analysis effectively with what activities and examples.
📊
Key Findings & Data:The data of the study were obtained from the documents such as books published on the topic and scientific articles examined using descriptive analysis.
💡
Conclusion & Impact:It is suggested that instruction through lecturing should be supported with writing to learn in order to make contributions to the instruction of dimensional analysis at an anticipated level, so an approach which will be performed in seven steps is recommended.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Temel Boyutlar · Boyut Analizi · Boyut Analizinin Öğretimi

Abstract

This study was conducted to explore how to teach dimensional analysis effectively with what activities and examples. The data of the study were obtained from the documents such as books published on the topic and scientific articles examined using descriptive analysis. Regarding the documents analysed, students comprehend the content of the subject through lecturing and thus, it is stated that the essential content of the subject to be learnt should be presented to students with its final version. It is suggested that instruction through lecturing should be supported with writing to learn in order to make contributions to the instruction of dimensional analysis at an anticipated level, so an approach which will be performed in seven steps is recommended. What will be done in each step is explained and it can be stated that particularly the examples given in the fifth step of the study will be helpful to understand the dimensional concept presented easily with its rules and also they will enable students to make connections with their prior knowledge and therefore, they can be the means to realize permanent learning. It is anticipated that the approach recommended can be used to teach other abstract and difficult subjects of physics

Özet

Bu çalışma, boyut analizinin öğretiminin; nasıl, ne tür örneklerle ve aktivitelerle daha etkili bir şekilde gerçekleştirilebileceğini araştırmak amacıyla yapılmıştır. Çalışmanın verileri, konuyla ilgili yayınlanmış kitap ve bilimsel makale gibi dokümanların, betimsel analiz yaklaşımına göre incelenmesiyle sağlanmıştır. Nitel araştırmalarda, doküman incelemesi tek başına bir veri toplama yöntemi olarak kullanılabilmektedir. İncelenen dokümanlara göre öğrenciler, sunuş yoluyla öğrendikleri konuların içeriğini kavrayabilmekte ve bu sebeple öğrenilecek konunun temel içeriğinin en son haliyle öğrenciye sunulması gerektiği ifade edilmektedir. Boyut analizinin öngörülen düzeyde öğrenilmesine katkıda bulunabilmek için sunuş yoluyla öğretim, öğrenme amaçlı yazma ile desteklenerek yedi aşamada gerçekleştirilebilecek bir yaklaşım önerilmiştir. Her aşamada neler yapılabileceği açıklanarak özellikle çalışmanın beşinci aşamasında verilen örneklerin; sunulan boyut analizi kavramının kurallarıyla birlikte kolay anlaşılmasını ve öğrenciler tarafından önceki bilgileriyle ilişkilendirilmesini sağlayacak nitelikte olduklarını ve bu nedenle onların kalıcı öğrenmenin gerçekleşmesine aracı olabileceği söylenebilir. Boyut analizinin öğretimi için önerilen yaklaşımın, fiziğin diğer soyut ve öğrenilmesi zor konularının öğretiminde de kullanılabileceği öngörülmektedir.

🔖

Cite This Article

YILDIZ, A. (2015). -. Education Sciences, Cilt: 10 Sayı: 2, 100–112. https://ajindex.com/articles/985476

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Arons, A.B., (1990). A Guide to Inroductory Physics Teaching. John Wiley, New York. • Altun, S., (2011). Öğretim Stratejileri ve sınıflamalar. S. FER (Ed). Öğrenme Öğretme Kuram ve Yaklaşımları (169-184), Ankara: Anı Yayıncılık. • Berg, T. and Brouwer, W., (1991). Teacher awareness of student alternate conceptions about rotational motion and gravity. Journal of Research in Science Teaching, 28(1), 3-18, Canada. • Borghi, L., De Ambrosis, A., and Massara, C.I., (1993). Understanding average speed: a study on students aged 11 to 12 years. Physics Education. 28, 33- 38. • Bueche, F. J. & Jerde, D. A. (2003). Fizik ilkeleri-I (Çev. Ed.: K. Çolakoğlu), Düzeltilmiş ikinci Türkçe Baskı. Ankara: Palme Yayıncılık. • Çengel, Y. and Cimbala, J.M., (2008). Akışkanlar mekaniği. Birinci baskıdan çeviri (Çev. Ed.: Tahsin Engin), İzmir Güven Kitapevi: İzmir. • Çepni, S., (2012).
  2. Bilim, Fen, Teknoloji Kavramlarının Eğitim Programlarına Yansımaları. S. Çepni (Ed). Kuramdan uygulamaya fen ve teknoloji öğretimi (1-32), Ankara: Pegem Akademi. • Çepni, S., Ayas, A., Johnson, D. ve Turgut, F., (1997). Fizik Öğretimi. YÖK / Dünya Bankası Milli Eğitimi Geliştirme Projesi Hizmet Öncesi Öğretmen Eğitimi. Ankara: YÖK Tarafından Yayımlanmıştır. • Davarcıoğlu, B., (2009). Fiziksel büyüklüklerin karakterizasyonu üzerine bir analiz. Türk Bilimsel Derlemeler Dergisi, 2(2), 57-61. • Ekiz, D., (2013). Bilimsel Araştırma Yöntemleri. Ankara: Anı Yayıncılık. • Erden, M. ve Akman, Y., (2012). Gelişim ve Öğrenme, 20. Baskı. Ankara: Arkadaş Yayınevi. • Ertaş, İ., (1984).
  3. Denel fizik dersleri, Cilt 1, Dördüncü baskı. İzmir: Barış Yayınları. • Fishbane, P.M., Gasiorowicz, S. and Thornton, S.T., (2008).
  4. Temel Fizik, Cilt 1, Üçüncü baskı (Çev. Ed.: Ü. Türkoğulları). Ankara: Arkadaş Yayinevi. • Gagliardi, M., Gallina, G., Guidino, P. and Piscitelli, S., (1989).
  5. Forze, Deformazioni, Movimento. Emme Ed., Torino. • Keskin, Y. ve Yaman, E., (2014). İlköğretim sosyal bilgiler programı ve ders kitaplarında yeni bir paradigma: Çokkültürlü eğitim. Turkish Studies, 9 (2), 933-960. • Klein, P.D., (2000). Elementary students’ strategies for writing-to-learn science. Cognition and Instruction, 18, 317–348. • Koca, M., (1998). Akışkanlar mekaniği (242 s).Ankara: Palme Yayıncılık. • Mason, L. and Boscolo, P., (2000). Writing and conceptual change. What changes? Instructional Science, 28, 199–226, Printed in the Netherlands: Kluwer Academic Publishers. • Mcdermott, L.C., (1990). Research and computer-based instruc