SavedAdd your journal

Journals / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2023 / Cilt: 12 Sayı: 4

Comparison of microstructure, mechanical and corrosion properties of Zn-%1Mg alloy produced by different casting methods

Farklı döküm yöntemleriyle üretilen Zn-%1Mg alaşımının mikroyapı, mekanik ve korozyon özelliklerinin karşılaştırılması

Selma ÖZARSLAN
Pages
1606–1614
Publication Date
2023-10-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

While the highest Vickers hardness value was obtained by the high pressure die casting method, the lowest corrosion rate was obtained in the gravity casting sample performed under a magnetic field.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Zn alloys have recently attracted attention in the search for biodegradable materials due to their high biocompatibility, moderate (compared to biodegradable Mg and Fe) degradation rate, and high strength.
📊
Key Findings & Data:In this study, the Zn-1% Mg alloys were produced using three different casting methods: gravity casting, gravity casting under a magnetic field, and high-pressure casting (HPDC).
💡
Conclusion & Impact:While the highest Vickers hardness value was obtained by the high pressure die casting method, the lowest corrosion rate was obtained in the gravity casting sample performed under a magnetic field.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Biyomalzemeler · Çinko alaşımları · Mikroyapı

Abstract

Zn alloys have recently attracted attention in the search for biodegradable materials due to their high biocompatibility, moderate (compared to biodegradable Mg and Fe) degradation rate, and high strength. In particular, the mechanical and corrosion properties of Zn-based alloys are investigated by alloying with different elements. In this study, the Zn-1% Mg alloys were produced using three different casting methods: gravity casting, gravity casting under a magnetic field, and high-pressure casting (HPDC). Their microstructure, mechanical, and corrosion properties were compared. It was determined that the Zn dendritic matrix phase and Mg2Zn11 eutectic structure were formed in all three casting methods. It has been observed that applying a magnetic field at the time of solidification thins the dendritic and eutectic structures. It has been observed that applying a magnetic field during solidification in gravity casting improves the mechanical and corrosion properties of the Zn-Mg alloy. While the highest Vickers hardness value was obtained by the high pressure die casting method, the lowest corrosion rate was obtained in the gravity casting sample performed under a magnetic field.

Özet

Zn alaşımları sahip oldukları yüksek biyouyumluluk, nispeten yavaş (biyobozunur Mg ve Fe’ye göre) bozunma hızı ve yüksek mukavemetleri nedeniyle son zamanlarda biyobozunur malzeme arayışında dikkat çekmeye başlamıştır. Özellikle farklı elementler ile alaşımlama yapılarak Zn esaslı alaşımların mekanik ve korozyon özellikleri incelenmektedir. Bu çalışmada Zn-%1 Mg alaşımları; gravite (yerçekimi) döküm, manyetik alan altında gravite döküm ve yüksek basınçlı döküm (HPDC) yöntemi olmak üzere üç farklı döküm yöntemiyle üretilerek mikroyapı, mekanik ve korozyon özellikleri karşılaştırılmıştır. Her üç döküm yönteminde de Zn dendritik matris fazının ve Mg2Zn11 ötektik yapının oluştuğu tespit edilmiştir. Katılaşma anında manyetik alan uygulanmasının dendritik ve ötektik yapıyı incelttiği ettiği görülmüştür. Gravite dökümde katılaşma anında manyetik alan uygulanmasının Zn-Mg alaşımının mekanik ve korozyon özelliklerini geliştirdiği görülmüştür. En yüksek Vickers sertlik değeri yüksek basınçlı döküm yöntemi ile elde edilirken, en düşük korozyon hızı manyetik alan altında gerçekleştirilen gravite döküm numunesinde elde edilmiştir.

🔖

Cite This Article

ÖZARSLAN, S. (2023). Comparison of microstructure, mechanical and corrosion properties of Zn-%1Mg alloy produced by different casting methods. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 12 Sayı: 4, 1606–1614. https://ajindex.com/articles/967286

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. N. Tipan, A. Pandey and P. Mishra, Magnesium based alloys for biodegradable implants applications using additive manufacturing technique: a review. Journal of Mechanics in Medicine and Biology, 22 (06), 2250042, 2022. https://doi.org/10.1142/S0219519422500427
  2. F. Abdiyan, A. Khanlarkhani, V. Zahedi Asl, P. Biabani, J. Zhao, S. Najafi and Y. Palizdar, Effect of adding Y and Ce on corrosion behaviour of the extruded ZK60 magnesium alloy. Corrosion Engineering, Science and Technology, 57 (1), 1-6, 2022. https://doi.org/10.1080/1478422X.2021.1976085 M.M. Zerankeshi, and R. Alizadeh, Ag-incorporated biodegradable Mg alloys. Materialia, 23, 101445, 2022. https://doi.org/10.1016/j.mtla.2022.101445
  3. Y. Shi, Z. Xue, P. Li, S. Yang, D. Zhang, S. Zhou, Z. Guan, Y. Li and L.N. Wang, Surface modification on biodegradable zinc alloys. Journal of Materials Research and Technology, 2003. https://doi.org/10.1016/j.jmrt.2023.06.149
  4. H. Hermawan, D. Dubé and D. Mantovani, Developments in metallic biodegradable stents. Acta biomaterialia, 6(5), 1693-1697, 2010. https://doi.org/10.1016/j.actbio.2009.10.006
  5. D. Pierson, J. Edick, A. Tauscher, E. Pokorney, P. Bowen, J. Gelbaugh, J. Stinson, H. Getty, C.H. Lee, J. Drelich and J. Goldman, A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 100 (1): 58-67, 2012. https://doi.org/10.1002/jbm.b.31922
  6. P.K. Bowen, J. Drelich, R.E. Buxbaum, R.M. Rajachar and J. Goldman, New approaches in evaluating metallic candidates for bioabsorbable stents. Emerging Materials Research, 1(5), 237-255, 2012. https://doi.org/10.1680/emr.12.00017
  7. J. Duan, L. Li, C. Liu, Y. Suo, X. Wang and Y. Yang, Novel Zn-2Cu-0.2 Mn-xLi (x= 0, 0.1 and 0.38) alloys developed for potential biodegradable implant applications. Journal of Alloys and Compounds, 916, 165478, 2022. https://doi.org/10.1016/j.jallcom.2022.165478
  8. H. Yang, B. Jia, Z. Zhang, X. Qu, G. Li, W. Lin, D. Zhu, K. Dai and Y. Zheng, Alloying design of biodegradable zinc as promising bone implants for load-bearing applications. Nature communications, 11(1), 401, 2020. https://doi.org/10.1038/s41467-019-14153-7 D. Vojtěch, J. Kubásek, J. Šerák and P. Novák, Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation. Acta biomaterialia, 7(9), 3515-3522, 2011. https://doi.org/10.1016/j.actbio.2011.05.008
  9. H. Kabir, K. Munir, C. Wen and Y. Li, Recent rese