AI Summary & Key Takeaways
AI InsightAccording to research results, the highest change in yellow hue was found on beech wood colored with ready-mix stain and with two-component varnish; and the lowest change was found on Scots pine wood colored with aniline stain and with one-component varnish.
📌 3 Key Takeaways
Abstract
In this study, changing effect of water based varnishes on yellow hue in wood material which was colored with water soluble color pigments in brown hue has been researched. For this purpose, wood samples which were prepared from the Oriental beech (Fagus orientalis L.), Sessile oak (Quercus petraea L.), Scots pine (Pinus sylvestris L.) in accordance with TS 53 and TS 2470, colored with aniline, ready-mix, chemical stains according to ASTM E1347-97, were coated with one-component and two-component varnishes according to ASTM D3023. Color change was determined in accordance with ASTM D2244. According to research results, the highest change in yellow hue was found on beech wood colored with ready-mix stain and with two-component varnish; and the lowest change was found on Scots pine wood colored with aniline stain and with one-component varnish.
Özet
Bu çalışmada, suda çözünen renk pigmentleri ile kahverengi tonda renklendirilmiş ahşap malzemede su bazlı verniklerin sarı tonu değiştirici etkisi araştırılmıştır. Bu maksatla, Doğu kayını (Fagus orientalis L.), sapsız meşe (Quercus petraea L.), sarıçam (Pinus sylvestris L.)’ dan TS 53 ve TS 2470’ e göre hazırlanan numuneler, ASTM E1347-97’ ye göre anilin, hazır karışım, kimyasal boya ile renklendirilerek ASTM D3023’ e göre tek ve iki bileşen verniklerle kaplanmıştır. Renk değişimi ASTM D2244’ e göre belirlenmiştir. Araştırma sonuçlarına göre, en fazla sarı tonda değişim iki bileşen vernikli hazır karışım boyalı kayında, en az tek bileşen vernikli anilin boyalı sarıçamda bulunmuştur.