Journals / Textile and Apparel / 2022 / Cilt: 32 Sayı: 4

Design and Implementation of a Textile-Based Embroidered Frequency Selective Surface

Pages
297–303
Publication Date
2022-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Fabricated samples are evaluated in terms of transmission characteristics and a satisfactory agreement is obtained between CT FSS and CY FSS for both simulations and fabricated prototypes.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This article presents the design, fabrication and analysis of a textile-based band-stop frequency selective surface (FSS), in GSM, WiFi, LTE and WiMAX bands where the electromagnetic (EM) pollution is intense.
📊
Key Findings & Data:In contrary to traditional FSS designs, which are printed on solid materials such as PCBs, this study presents an FSS considering a woven fabric as a substrate layer having features such as flexibility and compact weight.
💡
Conclusion & Impact:Fabricated samples are evaluated in terms of transmission characteristics and a satisfactory agreement is obtained between CT FSS and CY FSS for both simulations and fabricated prototypes.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Conductive yarn · Electromagnetic textile · Embroidery

Abstract

This article presents the design, fabrication and analysis of a textile-based band-stop frequency selective surface (FSS), in GSM, WiFi, LTE and WiMAX bands where the electromagnetic (EM) pollution is intense. The unit cell of the proposed FSS has been designed and simulated via a full-wave EM solver; CST Microwave Studio at the frequency of interest. In contrary to traditional FSS designs, which are printed on solid materials such as PCBs, this study presents an FSS considering a woven fabric as a substrate layer having features such as flexibility and compact weight. Two fabrication techniques have been considered one is conducted with a copper tape having a thickness of 35 µm denoted as CT FSS and the second one is conductive yarn embroidering technique denoted as CY FSS for the conducting pattern. Fabricated samples are evaluated in terms of transmission characteristics and a satisfactory agreement is obtained between CT FSS and CY FSS for both simulations and fabricated prototypes.

🔖

Cite This Article

ÜNER, İ., CAN, S., GÜRCÜM, B. H., YILMAZ, A. E., AKSOY, E. (2022). Design and Implementation of a Textile-Based Embroidered Frequency Selective Surface. Textile and Apparel, Cilt: 32 Sayı: 4, 297–303. https://ajindex.com/articles/943406

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Zulkifli, CZ, Hassan HN, Ismail W, Semunab SN. 2015. Embedded RFID and Wireless Mesh Sensor Network Materializing Automated Production Line Monitoring. Acta Physica Polonica A. 128 (2B), 86-89.
  2. Basit A, Qureshi IM, Khan W, Malik AN. 2016. Range–angle-dependent beamforming for cognitive antenna array radar with frequency diversity. Cognitive Computation. 8(204), 204-2016
  3. Mukanova, B, Mirgalikyzy T. 2015. Simulation of the Electric Field of a Point Source on the Relief Surface. Acta Physica Polonica A 128(2B), 142-144 Eurocontrol, “Criteria for selection of frequency band(s) for the future aeronautical communication infrastructure,” 2005. [Online]. Available: https://www.icao.int/safety/acp/ACPWGF/ACP-WG-F-13/WP36-Band Selection criteria for AI 1[1].6 ITU.doc. Karan Y, As N, Şahin M.E. 2017.
  4. Investigation of GSM, LTE and WI-FI electromagnetic radiation in dwellings. Acta Physica Polonica A 132(3), 509-512
  5. Can S, Karakaya EU, Yılmaz AE. 2020. Design, fabrication, and measurement of textile-based frequency selective surfaces. Microwave and Optical Technology Letters. DOI: 10.1002/mop.32474 Velentza O. 2015. Electromagnetic pollution - pathological effects of electromagnetic fields in man. AASCIT Journal of Health. 2(6) 74-79.
  6. Richman R, Munroe AJ, Siddiqui Y. 2014. A pilot neighborhood study towards establishing a benchmark for reducing electromagnetic field levels within single family residential dwellings. The Science of the Total Environment. 466, 625-634
  7. Tan K-S, Hinberg I. 2004. Electromagnetic interference with medical devices: in vitro laboratory studies and electromagnetic compatibility standards, In Biomedical Engineering. Editor: Dyro J F, Clinical Engineering Handbook, Academic Press, 254-262
  8. Hesarian MS, Shaikhzadeh NS, Sarraf SR. 2018. Design and fabrication of a fabric for electromagnetic filtering application (experimental and modeling analysis). The Journal of the Textile Institute (109), 775–784.
  9. Ayinmode BO, Farai IP, Pacific J. 2014. Evaluation of gsm radiation power density in three major cities in Nigeria International Journal of Environmental and Ecological Engineering, 8(10), 740 - 743. Seyfi L. 2013. Measurement of electromagnetic radiation with respect to the hours and days of a week at 100kHz–3GHz frequency band in a Turkish dwelling. Measurement 46(9), 3002-3009
  10. Cansiz M, Abbasov T, Kurt MB, Çelik AR. 2016.Mobile measurement of radiofrequency electromagnetic field exposure level and statistical analysis. Measurement 86, 159-164 As N,