SavedAdd your journal

Journals / NanoEra / 2021 / Cilt: Volume 1 - Sayı: Issue 2

Synthesis of Polymer-Coated Magnetic Nanoparticles to the Surface of Activated Carbon and Kinetic Studies

Huseyn OSMAN
Mehmet UGURLU
Ali Imran VAIZOGULLAR
Selman Ilteris YILMAZ
Abdul Jabbar CHAUDHARY
Journal
NanoEra
Pages
45–53
Publication Date
2021-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the polymer coated magnetic materials did not perform very well at high pH.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the presented study, itwas investigated the synthesis of activated carbon (AC), magnetic activated carbon (MagAC), styrene-butadiene styrene magnetic activated carbon (SBS/MagAC) and poly charbonatmagnetic activated carbon (PC/MagAC) samples.
📊
Key Findings & Data:The experimental study was carried out at low pH yields were higher and performance was 98-99% in AC and Mag/AC samples.
💡
Conclusion & Impact:It was found that the polymer coated magnetic materials did not perform very well at high pH.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Styrene-Butadiene Styrene · Polycarbonate · ctivated Carbon

Abstract

In the presented study, itwas investigated the synthesis of activated carbon (AC), magnetic activated carbon (MagAC), styrene-butadiene styrene magnetic activated carbon (SBS/MagAC) and poly charbonatmagnetic activated carbon (PC/MagAC) samples. Thermogravimetric Analyzer (TGA), Differential Scanning Calorimeter (DSC), Scanning Electron Microscope (SEM), X-Ray Diffractometer (XRD), Fourier Transform Infrared Spectrophotometer (FTIR analysis), Brunauer-Emmett-Teller(BET) analysis were used for characterizationstudies.Adsorbent type, temperature, solid-liquid ratio, initial concentrations and solution pH were selected as parameters in experiments. The experimental study was carried out at low pH yields were higher and performance was 98-99% in AC and Mag/AC samples. It was found that the polymer coated magnetic materials did not perform very well at high pH. It was also seen that MagAC and SBS/MagAC are more effective than AC and PC/MagAC to remove phenol.

🔖

Cite This Article

OSMAN, H., UGURLU, M., VAIZOGULLAR, A. I., YILMAZ, S. I., CHAUDHARY, A. J. (2021). Synthesis of Polymer-Coated Magnetic Nanoparticles to the Surface of Activated Carbon and Kinetic Studies. NanoEra, Cilt: Volume 1 - Sayı: Issue 2, 45–53. https://ajindex.com/articles/873765

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Adar, E.; Atay, İ.N.; Büncü, K.; Bilgili, M.S. Phenol removal from synthetic wastewater with powdered activated carbon: Isotherms, kinetics and thermodynamics. Environmental Research and Technology2020, 3, doi:10.35208/ert.692302
  2. Khalid, M.; Joly, G.; Renaud, A.; Magnoux, P. Removal of Phenol from Water by Adsorption Using Zeolites. Industrial & Engineering Chemistry Research2004, 43, 5275–5280, doi:10.1021/ie0400447
  3. Hamad, H.T. Removal of phenol and inorganic metals from wastewater using activated ceramic. Journal of King Saud University -Engineering Sciences2021, 33, 221–226, doi:10.1016/j.jksues.2020.04.006
  4. Akın, D.; Yakar, A.; Gündüz, U. Synthesis of Magnetic Fe3O4-Chitosan Nanoparticles by Ionic Gelation and Their Dye Removal Ability. Water Environment Research2014, 87, 425–436, doi:10.2175/106143014x14062131178673
  5. Bagheri, A.R.; Ghaedi, M.; Asfaram, A.; Bazrafshan, A.A.; Jannesar, R. Comparative study on ultrasonic assisted adsorption of dyes from single system onto Fe3O4 magnetite nanoparticles loaded on activated carbon: Experimental design methodology. Ultrasonics Sonochemistry2017, 34, 294–304, doi:10.1016/j.ultsonch.2016.05.047
  6. Bhatia, D.; Datta, D.; Joshi, A.; Gupta, S.; Gote, Y. Adsorption Study for the Separation of Isonicotinic Acid from Aqueous Solution Using Activated Carbon/Fe3O4 Composites. Journal of Chemical & Engineering Data2018, 63, 436–445, doi:10.1021/acs.jced.7b00881
  7. Gong, K.; Hu, Q.; Yao, L.; Li, M.; Sun, D.; Shao, Q.; Qiu, B.; Guo, Z. Ultrasonic Pretreated Sludge Derived Stable Magnetic Active Carbon for Cr(VI) Removal from Wastewater. ACS Sustainable Chemistry & Engineering2018, 6, 7283–7291, doi:10.1021/acssuschemeng.7b04421
  8. Zhang, S.; Wang, Z.; Chen, H.; Kai, C.; Jiang, M.; Wang, Q.; Zhou, Z. Polyethylenimine functionalized Fe3O4/steam-exploded rice straw composite as an efficient adsorbent for Cr(VI) removal. Applied Surface Science2018, 440, 1277–1285, doi:10.1016/j.apsusc.2018.01.191
  9. Badi, M.Y.; Azari, A.; Pasalari, H.; Esrafili, A.; Farzadkia, M. Modification of activated carbon with magnetic Fe 3 O 4 nanoparticle composite for removal of ceftriaxone from aquatic solutions. Journal of Molecular Liquids2018, 261, 146–154, doi:10.1016/j.molliq.2018.04.019
  10. Wen, T.; Wang, J.; Yu, S.; Chen, Z.; Hayat, T.; Wang, X. Magnetic Porous Carbonaceous Material Produced from Tea Waste for Efficient Removal of As(V), Cr(VI), Humic Acid, and Dyes. ACS Sustainable Chemistry & Engineering2017, 5, 437