Journals / NanoEra / 2021 / Cilt: Volume 1 - Sayı: Issue 2

Preparation of Montmorillonite Modified with Long Hydrocarbon Tail-Bearing CTA+ Ions-Polystyrene Nanocomposites (MMPS) and Investigation of Their Thermal and Mechanical Properties

Journal
NanoEra
Pages
30–35
Publication Date
2021-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The presence of the infrared bands of CTAB-montmorillonite in the PS/montmorillonite nanocomposite signifies that the clay tactoids were turned into fine particles and homogeneously dispersed in the PS matrix.DSC results also show that glass transition temperature and the thermal stability of the synthesized composites are higherthan those of the pure polymer and other composites.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:TPolymer nanocomposites have significantly taken lots of attention over the last decade.
📊
Key Findings & Data:The XRD patterns and HRTEM images show that in both cases, the organo-clay platelets have predominantly dispersed as tactoids (stacks of parallel clay platelets at about 100 nm separation) and also partially exfoliated into the polymer matrix.
💡
Conclusion & Impact:The presence of the infrared bands of CTAB-montmorillonite in the PS/montmorillonite nanocomposite signifies that the clay tactoids were turned into fine particles and homogeneously dispersed in the PS matrix.DSC results also show that glass transition temperature and the thermal stability of the synthesized composites are higherthan those of the pure polymer and other composites.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Organo-clay · Nanocomposites · Long-tailed

Abstract

TPolymer nanocomposites have significantly taken lots of attention over the last decade. The reason for this attention is thanks to the substantial improvements in thermal and mechanical properties of these composites which are obtained even with a small addition of clay, compared to conventional composites. This study aims to prepare nanocomposites of organo-clay and polystyrene bymelt intercalation method and to investigate their mechanical and thermal properties. Organo-clay was synthesized by solution intercalation method using aqueous dispersions of a long-chain hydrocarbon dispersed in aqueous medium by cetyltrimethylammonium bromide (CTAB) as a surfactant, with montmorillonite clay. The structural, thermal and mechanical characteristics of the nanocomposites were also investigated as a function of the content of the organo-clay. The organo-clay and the PCNs synthesized were characterized via XRD, HRTEM, FTIR and DSC techniques. The XRD patterns and HRTEM images show that in both cases, the organo-clay platelets have predominantly dispersed as tactoids (stacks of parallel clay platelets at about 100 nm separation) and also partially exfoliated into the polymer matrix. It was also found that the mechanical and thermal properties of the nanocomposites were significantly improved compared with pure polymer. The presence of the infrared bands of CTAB-montmorillonite in the PS/montmorillonite nanocomposite signifies that the clay tactoids were turned into fine particles and homogeneously dispersed in the PS matrix.DSC results also show that glass transition temperature and the thermal stability of the synthesized composites are higherthan those of the pure polymer and other composites.

🔖

Cite This Article

GURSES, A., GUNES, K. (2021). Preparation of Montmorillonite Modified with Long Hydrocarbon Tail-Bearing CTA+ Ions-Polystyrene Nanocomposites (MMPS) and Investigation of Their Thermal and Mechanical Properties. NanoEra, Cilt: Volume 1 - Sayı: Issue 2, 30–35. https://ajindex.com/articles/873763

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Fu, S.; Sun, Z.; Huang, P.; Li, Y.; Hu, N. Some basic aspects of polymer nanocomposites: A critical review. Nano Materials Science2019, 1, 2–30, doi:10.1016/j.nanoms.2019.02.006
  2. Penaloza, D.P.J. Modified clay for the synthesis of clay-based nanocomposites. Epitoanyag-Journal of Silicate Based and Composite Materials2019, 71, 5–11, doi:10.14382/epitoanyag-jsbcm.2019.2
  3. Sharp, K.G. Inorganic/Organic Hybrid Materials. Advanced Materials1998, 10, 1243–1248, doi:10.1002/(SICI)1521-4095(199810)10:15 3.0.CO;2-6
  4. Uthirakumar, P.; Song, M.-K.; Nah, C.; Lee, Y.-S. Preparation and characterization of exfoliated polystyrene/clay nanocomposites using a cationic radical initiator-MMT hybrid. European Polymer Journal2005, 41, 211–217, doi:10.1016/j.eurpolymj.2004.10.004
  5. Xie, W.; Gao, Z.; Pan, W.-P.; Hunter, D.; Singh, A.; Vaia, R. Thermal Degradation Chemistry of Alkyl Quaternary Ammonium Montmorillonite. Chemistry of Materials2001, 13, 2979–2990, doi:10.1021/cm010305s
  6. Xie, W.; Xie, R.; Pan, W.-P.; Hunter, D.; Koene, B.; Tan, L.-S.; Vaia, R. Thermal Stability of Quaternary Phosphonium Modified Montmorillonites. Chemistry of Materials2002, 14, 4837–4845, doi:10.1021/cm020705v
  7. Vaia, R.A.; Giannelis, E.P. Polymer Melt Intercalation in Organically-Modified Layered Silicates: Model Predictions and Experiment. Macromolecules1997, 30, 8000–8009, doi:10.1021/ma9603488
  8. Vaia, R.A.; Giannelis, E.P. Lattice Model of Polymer Melt Intercalation in Organically-Modified Layered Silicates. Macromolecules1997, 30, 7990–7999, doi:10.1021/ma9514333
  9. Yalcinkaya, S.E.; Yildiz, N.; Sacak, M.; Calimli, A. Preparation of polystyrene/montmorillonite nanocomposites: optimization by response surface methodology (RSM). Turkish Journal of Chemistry2010, 34,581–592, doi:10.3906/kim-0908-235
  10. Zhou, C.; Tong, D.; Yu, W. Smectite Nanomaterials: Preparation, Properties, and Functional Applications. In Nanomaterials from Clay Minerals; Elsevier, 2019; pp. 335–364
  11. Alshabanat, M.; Al-Arrash, A.; Mekhamer, W. Polystyrene/Montmorillonite Nanocomposites: Study of the Morphology and Effects of Sonication Time on Thermal Stability. Journal of Nanomaterials2013, 2013, 1–12, doi:10.1155/2013/650725
  12. Peña-Parás, L.; Sánchez-Fernández, J.A.; Vidaltamayo, R. Nanoclays for Biomedical Applications. In Handbook of Ecomaterials; Springer International Publishing: Cham, 2018; pp. 1–19
  13. Uddin, F. Clays, Nanoclays, and Montmorillonite Minerals. Metallurgical and Materials Tran