Journals / Bayburt Üniversitesi Fen Bilimleri Dergisi / 2022 / Cilt: 5 - Sayı: 1

Experimental Investigation of Behavior of Reinforced Concrete Columns Strengthening with Carbon Fiber Reinforced Polymer Under Axial and Uniaxial Bending Loadings

Karbon Fiber Takviyeli Elyaf Kumaşlarla Güçlendirilen Betonarme Kolonların Eş Merkezli ve Tek Doğrultulu Eğilme Yüklemeleri Altındaki Davranışının Deneysel Olarak İncelenmesi

Pages
91–103
Publication Date
2022-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the experimental study, the maximum load carrying capacity, initial stiffness, ductility and energy dissipation capacity of the test elements were calculated and the results were compared.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Reinforced concrete columns are the most important structural elements that need to be strengthened or repaired due to situations such as aging of the structure, environmental effects, earthquake, etc.
📊
Key Findings & Data:For this purpose, 6 large-scale test elements were fabricated.
💡
Conclusion & Impact:As a result of the experimental study, the maximum load carrying capacity, initial stiffness, ductility and energy dissipation capacity of the test elements were calculated and the results were compared.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Betonarme Kolon · Güçlendirme · CFRP

Abstract

Reinforced concrete columns are the most important structural elements that need to be strengthened or repaired due to situations such as aging of the structure, environmental effects, earthquake, etc. It is very important to determine what effects a structural element is exposed to while being strengthened. Although reinforced concrete columns are often subjected to concentric loads, especially side columns are also subjected to eccentric loads and try to carry axial loads under the influence of bending moments. In this study, it is aimed to experimentally investigate concentric and eccentrically loaded reinforced concrete columns strengthening with carbon fiber reinforced polymer (CFRP) strips. For this purpose, 6 large-scale test elements were fabricated. Two of these test elements were chosen as reference. The remaining 4 test elements are strengthened with CFRP strips. Loading type (concentric and eccentric) and anchor usage were determined as variables. The strip width and spacing were kept constant. As a result of the experimental study, the maximum load carrying capacity, initial stiffness, ductility and energy dissipation capacity of the test elements were calculated and the results were compared.

Özet

Betonarme kolonlar, yapının yaşlanması, çevresel etkiler, deprem vb. gibi durumlardan dolayı güçlendirilmesi ya da onarılması gereken en önemli yapısal elemanlardır. Bir yapı elemanı güçlendirilirken hangi etkilere maruz kaldıklarını tespit etmek oldukça önem arz etmektedir. Betonarme kolonlar da çoğu kez eş merkezli yüklemelere maruz kalsalar da özellikle kenar kolonlar dış merkezli olarak da yüklemelere maruz kalarak eğilme momentleri tesiri altında eksenel yük taşımaya çalışmaktadır. Bu çalışma kapsamında eş merkezli ve dış merkezli olarak yüklenen betonarme kolonların karbon fiber takviyeli elyaf kumaş (KFTEK) şeritler ile güçlendirilmesinin deneysel olarak incelenmesi amaçlanmıştır. Bu amaçla 6 adet büyük ölçekli deney elemanı üretilmiştir. Bu deney elemanlarından 2 adeti referans olarak seçilmiştir. Geriye kalan 4 adet deney elemanı is KFTEK şeritler ile güçlendirilmiştir. Yükleme tipi (eş ve dış merkezli) ve ankraj kullanımı değişkenler olarak belirlenmiştir. Şerit genişliği ve aralığı ise sabit tutulmuştur. Gerçekleştirilen deneysel çalışma sonucunda deney elemanlarının maksimum yük taşıma kapasitesi, başlangıç rijitliği, sünekliği ve enerji tüketim kapasitesi hesaplanarak sonuçlar karşılaştırılmıştır.

🔖

Cite This Article

ERBAŞ, Y., BARAN, M., MERCİMEK, Ö., ANIL, O. (2022). Experimental Investigation of Behavior of Reinforced Concrete Columns Strengthening with Carbon Fiber Reinforced Polymer Under Axial and Uniaxial Bending Loadings. Bayburt Üniversitesi Fen Bilimleri Dergisi, Cilt: 5 - Sayı: 1, 91–103. https://ajindex.com/articles/741253

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Rodriguez, M., Park, R. 1994. “Seismic load tests on reinforced concrete columns strengthened by jacketing”, ACI Structural Journal, 91(2),150–159.
  2. Stoppenhagen, D. R., Jirsa, J. O., Wyllie, L. A. 1995. “Seismic repair and strengthening of a severely damaged concrete frame”, ACI Structural Journal, 92(2), 177–187. Júlio, E. S., Branco, F., Silva, V. D. 2003. “Structural Rehabilitation of Columns using Reinforced Concrete Jacketing”, Progress in Structural Engineering and Materials, 5(1), 29-37.
  3. Eduardo, N. B. S. Júlio., Fernando, A. B. Branco., Vítor, D. Silva. 2005. “Reinforced Concrete Jacketing—Interface Influence on Monotonic Loading Response”, ACI Structural Journal, 102(2), 252-257. Júlio, E. S., Branco, F., Silva, V. D. 2004. “Concrete-to-Concrete Bond Strength—Influence of the Roughness of the Substrate Surface”, Construction and Building Materials, 18(9), 675-681.
  4. Chung, L. L., Wu, L. Y., Lien, K. H. 2011. “Experimental study on retrofit of school buildings by adding sandwich columns to partition brick walls”, Earthquake Engineering and Structural Dynamics, 40, 1417-1434.
  5. Chai, Y. H., Priestley, M. J. N., Seible, F. 1994. “Analytical model for steel jacketed Reinforced Concrete circular bridge columns”, ASCE Journal of Structural Engineering, 120(8), 2358–76.
  6. Mahrenholtz, C., Lin, P. C., Wu, A. C., Tsai, K. C., Hwang, S. J., Lin, R. Y., Bhayusukma, M. Y. 2015. “Retrofit of reinforced concrete frames with buckling-restrained braces”, Earthquake Engineering and Structural Dynamics, 44, 59-78.
  7. Shafaei, J., Hosseini, A., Marefat, M. S., Ingham, J. M. 2017. “Rehabilitation of earthquake damaged external RC beam-column joints by joint enlargement using prestressed steel angles”, Earthquake Engineering and Structural Dynamics, 46, 291-316.
  8. Herwig, A., Motavalli, M. 2016. “Axial behavior of square Reinforced Concrete columns strengthened with lightweight concrete elements and unbonded GFRP wrapping”, ASCE Journal of Composites for Construction, 16, 747–52.
  9. Hu, Y. M., Yu, T., Teng, J. G. 2011. “FRP confined circular concrete filled thin steel tubes under axial compression”, ASCE Journal of Composites for Construction, 15(15), 850–60.
  10. Parvin, A., Brighton, A. 2014. “Fiber Reinforced Polymer composites strengthening of concrete column under various loading conditions”, Polymers, 6, 1040–56.
  11. Olivova, K., Bilcik, J. 2009. “Strengthening of concrete columns with CFRP”, Slovak Journal of Civil Engineering, 1, 1–9.
  12. Barros, J. A. O., Varma, R. K., Sena-Cruz, M., A