Journals / Wood Industry and Engineering / 2021 / Cilt: 3 - Sayı: 2

A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY

Pages
48–59
Publication Date
2021-12-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Determining the most optimal processing conditions for all wood species used in the wood machining industry will be useful in terms of productivity, quality, and cost and so on.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this study was to analyze and evaluate the studies on massive wood materials machining and surface quality.
📊
Key Findings & Data:It has been observed that these studies were performed in order to determine optimal wood machining parameters for obtaining the best surface quality on various wood species.
💡
Conclusion & Impact:Determining the most optimal processing conditions for all wood species used in the wood machining industry will be useful in terms of productivity, quality, and cost and so on.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Wood materials · machining quality · surface quality

Abstract

The purpose of this study was to analyze and evaluate the studies on massive wood materials machining and surface quality. It has been observed that these studies were performed in order to determine optimal wood machining parameters for obtaining the best surface quality on various wood species. A variety of visual techniques and surface roughness measurement methods are used and studied to be developed in order to determine surface quality. Determining the most optimal processing conditions for all wood species used in the wood machining industry will be useful in terms of productivity, quality, and cost and so on.

🔖

Cite This Article

SOFUOĞLU, S. D. (2021). A MINI REVIEW OF THE STUDIES ON MASSIVE WOOD MATERIALS MACHINING AND SURFACE QUALITY. Wood Industry and Engineering, Cilt: 3 - Sayı: 2, 48–59. https://ajindex.com/articles/710554

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Aras R., Budakci M. and Ozisik O. (2007). The effect of wood turning techniques on surface roughness of wood material. Journal of Polytechnic, 10(3), 325-330.
  2. Aslandogan C. (2005). Research on determination of surface roughness of Crimean pine (Pinus nigra Arnold) wood. Master's thesis, Hacettepe University, The Institute of Sciences, Ankara, Turkey