Journals / Wood Industry and Engineering / 2026 / Cilt: 8 Sayı: 1

LOGISTICS COST IN THE FOREST INDUSTRY: A CASE STUDY ANALYSIS

ORMAN ENDÜSTRİSİNDE LOJİSTİK MALİYET: BİR VAKA ÇALIŞMASI ANALİZİ

Murat Şahin(ARTVİN ÇORUH ÜNİVERSİTESİ, LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, ORMAN ENDÜSTRİ MÜHENDİSLİĞİ (YL) (TEZLİ))0009-0004-8208-3678
Nadir Ersen(ARTVİN MESLEK YÜKSEKOKULU)0000-0003-3643-1390
Öner Karayiğit(ARTVİN ÇORUH ÜNİVERSİTESİ, LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ)0000-0002-5135-7195
Pages
1–12
Publication Date
2026-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Overall, the study demonstrates that dynamic pricing, backhaul (return load) organization, and a transition toward green logistics are essential to enhance the competitiveness of the Artvin forest industry.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The forest products industry holds a strategic position in the Turkish economy, particularly due to its role in creating employment in rural areas and contributing to regional development.
📊
Key Findings & Data:Data from the Turkish Statistical Institute and the General Directorate of Forestry indicate that transportation expenses constitute the largest share of logistics costs.
💡
Conclusion & Impact:Overall, the study demonstrates that dynamic pricing, backhaul (return load) organization, and a transition toward green logistics are essential to enhance the competitiveness of the Artvin forest industry.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Orman Endüstrisi · Lojistik Maliyet · Boş Yük

Abstract

The forest products industry holds a strategic position in the Turkish economy, particularly due to its role in creating employment in rural areas and contributing to regional development. The sustainability of this sector depends not only on production capacity but also on the efficiency of logistics processes extending from raw materials to final products. Data from the Turkish Statistical Institute and the General Directorate of Forestry indicate that transportation expenses constitute the largest share of logistics costs. Artvin province, characterized by its mountainous and rugged terrain, stands out as a region where these costs are further amplified due to geographical conditions. The main objective of this study is to examine the logistics cost structure of a forest industry firm operating in Artvin and to analyze the factors affecting these costs based on real firm-level data. Considering the structure and limitations of the dataset, a “Cost Structure Analysis” and a “Case Study” approach were adopted. Using logistics operation data covering different transport distances from Artvin, capacity utilization rates, empty return risks, and technological transformation scenarios were analyzed. The results reveal that approximately 70–80% of total logistics costs arise directly from transportation expenses. Scenario analyses show that when vehicle capacity utilization remains at around 50% by weight, unit costs increase by nearly 100%, highlighting the critical role of volume–weight imbalance as a cost factor. Moreover, future projections in which diesel vehicles are replaced with electric vehicles indicate that total logistics costs could be reduced by about 20%. The analysis also estimates that the investment payback distance is approximately 480,480 km and that the firm would incur losses if diesel fuel prices exceed 68 TL per liter. Overall, the study demonstrates that dynamic pricing, backhaul (return load) organization, and a transition toward green logistics are essential to enhance the competitiveness of the Artvin forest industry.

Özet

Orman ürünleri sektörü, özellikle kırsal kesimde istihdam yaratma ve bölgesel kalkınmaya katkıda bulunma rolü nedeniyle Türk ekonomisinde stratejik bir konuma sahiptir. Bu sektörün sürdürülebilirliği sadece üretim kapasitesine değil, aynı zamanda hammaddelerden nihai ürünlere kadar uzanan lojistik süreçlerinin verimliliğine de bağlıdır. Türkiye İstatistik Enstitüsü ve Orman Genel Müdürlüğü verileri, lojistik maliyetlerinin en büyük payını ulaşım giderlerinin oluşturduğunu göstermektedir. Dağlık ve engebeli arazisiyle karakterize edilen Artvin ili, coğrafi koşullar nedeniyle bu maliyetlerin daha da arttığı bir bölge olarak öne çıkmaktadır. Bu çalışmanın temel amacı, Artvin'de faaliyet gösteren bir orman ürünleri firmasının lojistik maliyet yapısını incelemek ve gerçek firma düzeyindeki verilere dayanarak bu maliyetleri etkileyen faktörleri analiz etmektir. Veri setinin yapısı ve sınırlamaları göz önünde bulundurularak, “Maliyet Yapısı Analizi” ve “Vaka Çalışması” yaklaşımı benimsenmiştir. Artvin'den farklı taşıma mesafelerini kapsayan lojistik operasyon verileri kullanılarak, kapasite kullanım oranları, boş dönüş riskleri ve teknolojik dönüşüm senaryoları analiz edilmiştir. Sonuçlar, toplam lojistik maliyetlerinin yaklaşık %70-80'inin doğrudan ulaşım giderlerinden kaynaklandığını ortaya koymaktadır. Senaryo analizleri, araç kapasite kullanımının ağırlık bazında yaklaşık %50'de kaldığı durumlarda birim maliyetlerin neredeyse %100 arttığını ve hacim-ağırlık dengesizliğinin maliyet faktörü olarak kritik rolünü vurgulamaktadır. Dahası, dizel araçların elektrikli araçlarla değiştirildiği gelecek projeksiyonları, toplam lojistik maliyetlerinin yaklaşık %20 oranında azaltılabileceğini göstermektedir. Analiz ayrıca, yatırım geri ödeme mesafesinin yaklaşık 480.480 km olduğunu ve dizel yakıt fiyatlarının litre başına 68 TL'yi aşması durumunda firmanın zarar edeceğini tahmin etmektedir. Genel olarak, çalışma, dinamik fiyatlandırma, geri dönüş yükü organizasyonu ve yeşil lojistiğe geçişin Artvin orman endüstrisinin rekabet gücünü artırmak için gerekli olduğunu göstermektedir.

🔖

Cite This Article

Şahin, M., Ersen, N., Karayiğit, Ö., *, N. E. (2026). LOGISTICS COST IN THE FOREST INDUSTRY: A CASE STUDY ANALYSIS. Wood Industry and Engineering, Cilt: 8 Sayı: 1, 1–12. https://ajindex.com/articles/1237214

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (37)

  1. Abbas D., Handler R., Dykstra D., Hartsough B. and Lautala P. (2013). Cost Analysis of Forest Biomass Supply Chain Logistics. Journal of Forestry, 111(4), 271-281.
  2. Acar H.H. (1998). Minimization to be Using of Transport Model of Transportation Costs by Trucks at Artvin Forest District.Turkish Journal of Agriculture and Forestry, 22(5), 491-497.
  3. Acar H.H. and Eroğlu H. (2001). The Planning of Wood Transport on the Forest Road. Kafkas University Artvin Faculty of Forestry Journal, 1, 61-66.
  4. Acuna M., Mirowski L. and Ghaffariyan M. R. (2012). Optimising Transport Efficiency and Costs in Australian Wood Chipping Operations. Biomass and Bioenergy, 46, 291-300.
  5. Akay A.E. (2020). Using GIS-Based Decision Support System for Determining Optimum Routing of Logging Trucks. ArtGRID - Journal of Architecture Engineering and Fine Arts, 2(1), 13-22.
  6. Devlin G., McDonnell K. and Ward S. (2008). Timber Haulage Routing in Ireland: An Analysis Using GIS and GPS. Journal of Transport Geography, 16(1), 63-72.
  7. Dykstra D.P. and Heinrich R. (1996). FAO Model Code of Forest Harvesting Practice. Food and Agriculture Organization of the United Nations (FAO), Rome, Italy.
  8. Eker M., Acar H.H. and Çoban H. (2010). The Potential Ecological Impacts of Forest Roads. Turkish Journal of Forestry, 11(1), 109-125.
  9. Eminağaoğlu Ö. (2015). Forest Existence in Artvin. In: Eminağaoğlu, Ö. (Ed.) Natural Plants of Artvin (pp. 53-60)), Istanbul: Promat Publishing.
  10. Epstein R., Karlsson J., Rönnqvist M. and Weintraub A. (2007). Forest Transportation. In: Handbook of Operations Research in Natural Resources (ss. 391-403). New York: Springer.
  11. Fernandez-Lacruz R., Eriksson A. and Bergström D. (2020). Simulation-Based Cost Analysis of Industrial Supply of Chips from Logging Residues and Small-Diameter Trees. Forests, 11(1), 1-21.
  12. Gazran S., Boukherroub T., Rönnqvist M. and Paquet M. (2023). Optimizing Truck Platooning Transportation Planning: An Application to Forestry Products Supply Chains. Canadian Journal of Forest Research, 53(7), 519-532.
  13. Ghaffariyan, M.R., Acuna, M. and Brown, M. (2013). Analysing the Effect of Five Operational Factors on Forest Residue Supply Chain Costs: A Case Study in Western Australia. Biomass and Bioenergy, 59, 486-493.
  14. Hacırüstemoğlu, R. and Şakrak, M. (2002). Current Approaches in Cost Accounting. Istanbul: Türkmen Press.
  15. Harouff, S.E., Grushecky, S.T. and Spong, B.D. (2008). West Virginia Forest Industry Transportation Network Analysis Using GIS. Proceedings of16th Central Hardwood Forest Conference, April 8-9, West Lafayette, IN. Gen. Tech. Rep.
  16. NRS-P-24. Newtown Square, PA: U.S. Department of Agriculture, Forest Service, Northern Research Station, 257-264.
  17. Kıymetli Şen İ. (2014). Management of Logistics Activities and Costing Approaches. Çankırı Karatekin University Journal of the Faculty of Economics and Administrative Sciences, 4(1), 83-106.
  18. Klvač R., Kolařík J., Volná M. and Drápela K. (2013). Fuel Consumption in Timber Haulage. Croatian Journal of Forest Engineering, 34(2), 229-240.
  19. Koirala A., Kizha A.R. and Roth B.E. (2017). Perceiving Major Problems in Forest Products Transportation by Trucks and Trailers: A Cross-sectional Survey. European Journal of Forest Engineering, 3(1), 23-34.
  20. Kurt C. (2010). The Significance of Logistics in Transport Sector in Turkey. Master Thesis, Istanbul University, Institute of Social Sciences, İstanbul.
  21. Laitila J., Asikainen A. and Ranta T. (2016). Cost Analysis of Transporting Forest Chips and Forest Industry By-Products with Large Truck-Trailers in Finland. Biomass and Bioenergy, 90, 252-261.
  22. Malladi K.T. and Sowlati T. (2017). Optimization of Operational Level Transportation Planning in Forestry: A Review. International Journal of Forest Engineering, 28(3), 198–210.
  23. McKinnon A. (2015). Environmental Sustainability: A New Priority for Logistics Managers. In: Green Logistics: Improving the Environmental Sustainability of Logistics. McKinnon, A., Browne, M., Piecyk, M. and Whiteing, A. (eds.). London: Kogan Page Publishers, pp. 3-30.
  24. Mobini M., Sowlati T. and Sokhansanj S. (2009). Forest Biomass Supply Logistic for a Power Plant Using the Discrete-Event Simulation Approach. Applied Energy, 88(4), 1241-1250.
  25. Monti C.A.U., Gomide L.R., Oliveira R.M. and França L.C.J. (2020). Optimization of Wood Supply: The Forestry Routing Optimization Model. Anais da Academia Brasileira de Ciências, 92(3),1-17.
  26. Palander T., Tokola T., Borz S.A. and Rauch P. (2024). Forest Supply Chains During Digitalization: Current Implementations and Prospects in Near Future. Curr. For. Rep. 10, 223–238.
  27. Pandur Z., Nevečerel H., Šušnjar M., Bačić M. and Lepoglavec K. (2022). Energy Efficiency of Timber Transport by Trucks on Hilly and Mountainous Forest Roads. Forestist, 72(1), 20-28.
  28. Pichler G., Sandak J., Picchi G., Kastner M., Graifenberg D., Stampfer K. and Kühmaier M. (2022). Timber Tracking in a Mountain Forest Supply Chain: A Case Study to Analyze Functionality, Bottlenecks, Risks, and Costs. Forests, 13(9), 1373. Ramamurthi P.V., Fernandes M.C., Nielsen P.S. and Nunes C.P. (2014). Logistics Cost Analysis of Rice Residues for Second Generation Bioenergy Production in Ghana. Bioresource Technology, 173, 429-438.
  29. Sari D. R., Herlambang R. T., Ruslim Y. and Herlambang H. (2025). Productivity and Cost Analysis of Log Hauling Using Logging Trucks in Natural Forests in East Kalimantan, Indonesia. In: Advances in Biological Sciences Research. Proceedings of the International Conference on Tropical Agrifood, Feed and Forestry (ICTAFF 2024), Atlantic Press, 47, 17-27.
  30. Sedliačiková M., Dobrovič J., Šatanová A. and Pinka D. (2025). Green Logistics in the Wood-Processing Enterprises. Entrepreneurship and Sustainability Issues, 13(1), 453-463.
  31. Sessions, J. (2007). Forest Operations in the Tropics. Berlin: Springer.
  32. Seuring S. and Muller M. (2008). From a Literature Review to a Conceptual Framework for Sustainable Supply Chain Management. Journal of Cleaner Production, 16(15), 1699-1710.
  33. Shiers W. (2024). Mercedes-Benz eACTROS 600 Driving Impressions Review. (https://www.commercialmotor.com/knowledge-hub/article/on-the-road-mercedes-benz-eactros-600, Access date: 01.09.2025)
  34. Small R. and Ghaffariyan M. R. (2023). A Short Literature Review on Sawlog and Pulpwood Transport Efficiency and Fuel Consumption. European Journal of Forest Engineering, 9(1), 41-47.
  35. Svenson G. and Fjeld D. (2016). The Impact of Road Geometry and Surface Roughness on Fuel Consumption of Logging Trucks. Scandinavian Journal of Forest Research, 31(5), 526-536.
  36. Troncoso J.J. and Garrido, R.A. (2005). Forestry Production and Logistics Planning: An Analysis Using Mixed-Integer Programming. Forest Policy and Economics, 7(4), 625-633.
  37. Wolfsmayr U. J., Rauch P. and Gronalt M. (2014). The Primary Forest Fuel Supply Chain: A literature review. Biomass and Bioenergy, 60, 203-221.