Elde edilen neticeler konsol kiriş titreşim deneyi ile kompozit sandviç kiriş eğilme rijitliğinin 3 nokta yükleme deneyinden daha yüksek hassasiyetle belirlenebildiğini göstermektedir.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:Bu çalışmada cam elyafı takviyeli poliüretan dış yüzlü ve rijit köpük çekirdekli sandviç kiriş eğilme rijitliğinin konsol kiriş titreşim testi ile belirlenmesi konusu üzerinde durulmuştur.
📊
Key Findings & Data:İmal edilen sandviç kiriş numuneleri üzerinde yapılan konsol kiriş titreşim deneylerinden elde edilmiş eğilme rijitliği değerleri bir sonlu elemanlar modeli ile ve 3 nokta eğilme deneyi ile elde edilmiş olan değerler ile mukayeseli olarak sunulmuştur.
💡
Conclusion & Impact:Elde edilen neticeler konsol kiriş titreşim deneyi ile kompozit sandviç kiriş eğilme rijitliğinin 3 nokta yükleme deneyinden daha yüksek hassasiyetle belirlenebildiğini göstermektedir.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Kompozit · sandviç kiriş · poliüretan
Özet
Bu çalışmada cam elyafı takviyeli poliüretan dış yüzlü ve rijit köpük çekirdekli sandviç kiriş eğilme rijitliğinin konsol kiriş titreşim testi ile belirlenmesi konusu üzerinde durulmuştur. İmal edilen sandviç kiriş numuneleri üzerinde yapılan konsol kiriş titreşim deneylerinden elde edilmiş eğilme rijitliği değerleri bir sonlu elemanlar modeli ile ve 3 nokta eğilme deneyi ile elde edilmiş olan değerler ile mukayeseli olarak sunulmuştur. Elde edilen neticeler konsol kiriş titreşim deneyi ile kompozit sandviç kiriş eğilme rijitliğinin 3 nokta yükleme deneyinden daha yüksek hassasiyetle belirlenebildiğini göstermektedir.
I.M. Daniel et al. "Failure modes of composite sandwich beams," International journal of damage mechanics, vol. 11.4 (2002): 309-334
C.A. Steeves, N.A. Fleck, “Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part II: experimental investigation and numerical modelling,” International Journal of Mechanical Sciences, vol. 46, pp. 585–608, 2004
V.L. Tagarielli, N.A. Fleck, V.S. Deshpande, “Collapse of clamped and simply supported composite sandwich beams in three-point bending,” Composites: Part B, Vol. 35(6-8), pp. 523-53, 2005
H.D. Rozman, G.S. Tay, A. Abubakar,R.N. Kumar, “Tensile properties of oil palm empty fruit bunch-polyurethane composites,” European Polymer Journal, vol. 37: pp. 1759-1765, 2001
R.V. Silva et al. “Fracture toughness of natural fibers/castor oil polyurethane composites,” Composites science and technology, vol. 66(10), pp. 1328-1335, 2006
Y.A. El-Shekeil et al. "Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites," Materials & Design, vol. 40, pp. 299-303, 2012
M.Ö. Seydibeyoğlu, K. Oksman, "Novel nanocomposites based on polyurethane and micro fibrillated cellulose," Composites Science and Technology, vol. 68(3-4)pp. 908-914, 2008
S. Husić, I. Javni, and Z.S. Petrović, "Thermal and mechanical properties of glass reinforced soy-based polyurethane composites," Composites Science and Technology, vol. 65(1), pp. 19-25, 2005
J.M.L. Reis, F. L. Chaves, and H. S. da Costa Mattos. "Tensile behaviour of glass fibre reinforced polyurethane at different strain rates," Materials & Design, vol. 49, pp. 192-196, 2013
A. Albarbar, A. Badri, J.K. Sinha, and A. Starr, “Performance evaluation of MEMS accelerometers,” Measurement, vol.42(5), pp. 790-795, 2009
M. Varanis, A.L. Silva, P.H.A. Brunetto, and R.F. Gregolin, “Instrumentation for mechanical vibrations analysis in the time domain and frequency domain using the Arduino platform,” Revista Brasileira de Ensino de Física, vol. 38(1),pp.1301/1-10, 2016
M. Varanis, A.L. Silva, and A.G. Mereles, “On mechanical vibration analysis of a multi degree of freedom system based on arduino and MEMS accelerometers,” Revista Brasileira de Ensino de Física, vol.40(1), 2018
İ.U. Çağdaş, R. Aliyev, “Metal yüzlü sandviç konsol ki