Journals / Konya Journal of Engineering Sciences / 2022 / Cilt: 10 Sayı: 3

THE INFLUENCE OF TANGENTIAL EDGE RESTRAINTS ON THE NONLINEAR RESPONSE OF LAMINATED COMPOSITE CYLINDRICAL PANELS SUBJECT TO A PINCHING FORCE

Teğet Sınır Şartlarının Ortasından Tekil Yüklü Katmanlı Kompozit Silindirik Panellerin Nonlineer Davranışlarına Etkisi

Pages
623–633
Publication Date
2022-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

However, it is observed that the simply supported panels demonstrate a much less stiff behavior when one of the straight edges is tangentially unrestrained.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the influence of straight edge tangential restraints on the nonlinear response of symmetrically laminated and balanced composite cylindrical panels subject to a pinching force is investigated.
📊
Key Findings & Data:An 8-node degenerated nonlinear shell element, formulation of which is based on the Total Lagrangian Formulation, is employed for geometrically nonlinear analysis and the Arc-Length Method is used to trace the nonlinear path.
💡
Conclusion & Impact:However, it is observed that the simply supported panels demonstrate a much less stiff behavior when one of the straight edges is tangentially unrestrained.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Katmanlı kompozit · Silindirik panel · Nonlineer davranış

Abstract

In this study, the influence of straight edge tangential restraints on the nonlinear response of symmetrically laminated and balanced composite cylindrical panels subject to a pinching force is investigated. An 8-node degenerated nonlinear shell element, formulation of which is based on the Total Lagrangian Formulation, is employed for geometrically nonlinear analysis and the Arc-Length Method is used to trace the nonlinear path. First, the element is validated for geometrically non-linear analysis by solving two verification problems. Then, numerical results for different rotational boundary conditions are presented for two different stacking sequences, and thickness values. The numerical results presented show that there is no significant difference between the tangentially unrestrained and restrained clamped panels when only one edge is tangentially unrestrained. However, it is observed that the simply supported panels demonstrate a much less stiff behavior when one of the straight edges is tangentially unrestrained.

Özet

Bu çalışmada, ortasından düşey tekil yük ile yüklü simetrik ve dengeli katmanlı kompozit silindirik panellerin nonlineer davranışlarında düz kenar teğet sınır şartlarının etkisi incelenmiştir. Bu maksatla, toplam Lagrange formulasyonuna dayanan sekiz düğümlü, dejenere ve doğrusal olmayan bir kabuk sonlu elemanı kullanılmıştır. Nonlineer davranışı gözlemleyebilmek için kiriş uzunluğu yöntemi kullanılmıştır. Öncelikle bazı doğrulama problemleri çözülerek eleman geometrik açıdan doğrusal olmayan analiz için doğrulanmıştır. Daha sonra problem farklı dönel sınır şartları, kalınlık ve katman düzenleri için incelenmiştir. Ankastre paneller için elde edilen neticeler teğet doğrultuda her iki kenar veya sadece bir kenar tutulu olduğunda davranışta önemli bir fark olmadığını göstermektedir. Ancak, basit mesnetli paneller için elde edilen neticeler rijitliğinin sadece bir kenar teğetsel doğrultuda tutulduğunda önemli nispette düştüğünü göstermektedir.

🔖

Cite This Article

ÇAĞDAŞ, İ. U. (2022). THE INFLUENCE OF TANGENTIAL EDGE RESTRAINTS ON THE NONLINEAR RESPONSE OF LAMINATED COMPOSITE CYLINDRICAL PANELS SUBJECT TO A PINCHING FORCE. Konya Journal of Engineering Sciences, Cilt: 10 Sayı: 3, 623–633. https://ajindex.com/articles/908976

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Almroth, B. O. (1966). Influence of edge conditions on the stability of axially compressed cylindrical shells. AIAA Journal, 4(1), 134-140.
  2. Bakshi, K., & Chakravorty, D. (2014). Geometrically linear and nonlinear first-ply failure loads of composite cylindrical shells. Journal of Engineering Mechanics, 140(12), 04014094. Barbosa, J. A. T., & Ferreira, A. J. M. (2009). Geometrically nonlinear analysis of functionally graded plates and shells. Mechanics of Advanced Materials and Structures, 17(1), 40-48.
  3. Bathe, K. J., & Bolourchi, S. (1979). Large displacement analysis of three‐dimensional beam structures. International journal for numerical methods in engineering, 14(7), 961-986.
  4. Bathe, K. J., & Bolourchi, S. (1980). A geometric and material nonlinear plate and shell element. Computers & structures, 11(1-2), 23-48.
  5. Bergan, P. G., Horrigmoe, G., Bråkeland, B., & Søreide, T. H. (1978). Solution techniques for non− linear finite element problems. International Journal for Numerical Methods in Engineering, 12(11), 1677-1696.
  6. Cagdas, I. U., & Adali, S. (2012-b). Effect of Fiber Orientation on Buckling and First-Ply Failures of Cylindrical Shear-Deformable Laminates. Journal of Engineering Mechanics, 139(8), 967-978.
  7. Cagdas, I., & Adali, S. (2012-a). Design of a laminated composite variable curvature panel under uniaxial compression. Engineering Computations: International Journal for Computer-Aided Engineering and Software, 29(1), 48-64.
  8. Chao, W. C., & Reddy, J. N. (1984). Analysis of laminated composite shells using a degenerated 3‐D element. International Journal for Numerical Methods in Engineering, 20(11), 1991-2007.
  9. Crisfield, M. A. (1981). A fast incremental/iterative solution procedure that handles “snap-through”. In Computational Methods in Nonlinear Structural and Solid Mechanics (pp. 55-62).
  10. Pergamon. de Souza Neto, E. A., Peric, D., & Owen, D. R. (2011). Computational methods for plasticity: theory and applications. John Wiley & Sons. Hieu, P. T., & Tung, H. V. (2019). Thermal buckling and postbuckling of CNT-reinforced composite cylindrical shell surrounded by an elastic medium with tangentially restrained edges. Journal of Thermoplastic Composite Materials, 0892705719853611. Kant, T. (1992). A general fibre-reinforced composite shell element based on a refined shear deformation theory. Computers & Structures, 42(3), 381-388.
  11. Librescu, L., & Lin, W. (1997). Vibration of thermomechanically loaded flat and curved panels taking into account geometric im