SavedAdd your journal

Journals / Karamanoğlu Mehmetbey Üniversitesi Sosyal ve Ekonomik Araştırmalar Dergisi / 2015 / Cilt: 17 - Sayı: 28

An Application of “Shewart, Cusum and Ewma” Quality Control Charts into A Manufacturing Business

Kalite Kontrol Grafiklerinden “Shewart, Cusum ve Ewma” nın Bir Üretim ĠĢletmesinde Uygulanması

İrfan ERTUĞRUL
Abdullah ÖZÇİL
Pages
14–26
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The control chart for the copper industry will be helpful for the enterprise applications which will be held and theoretical studies.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:After the industrial revolution in the 19th century, the concept „quality‟ was borned with the competition in the products and services industry.
📊
Key Findings & Data:That producers and consumers from past to present want to use the resources at an optimal level has contributed so much to the quality development.
💡
Conclusion & Impact:The control chart for the copper industry will be helpful for the enterprise applications which will be held and theoretical studies.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

After the industrial revolution in the 19th century, the concept „quality‟ was borned with the competition in the products and services industry. That producers and consumers from past to present want to use the resources at an optimal level has contributed so much to the quality development. Because of global competition, the concept „quality‟ has gained much importance for the businesses to exist in the product or service market. The aim of this study is to sample the use of control charts which are the quality tools for increasing the levels of products or services. In the conducted study, in order to determine the level of aimed quality level, the control charts for variables (Shewart), cumulative sum quality control charts (CUSUM) and exponentially weighted moving average control charts (EWMA) are used. The differences among them are presented by using different control charts. The control chart for the copper industry will be helpful for the enterprise applications which will be held and theoretical studies.

Özet

19. yy sanayi devrimi sonrasında ürün ve hizmet sektöründe rekabet piyasasının oluĢması ile birlikte kalite kavramı doğmuĢtur. Üreticiler ve tüketiciler geçmiĢten günümüze kaynaklarını optimal düzeyde kullanmak istemeleri kalitenin geliĢimine çok fazla katkıda bulunmuĢtur. Küresel rekabet ortamı ile iĢletmelerin ürün veya hizmet piyasasında var olmasında kalite kavramı çok fazla önem kazanmıĢtır. Bu çalıĢmanın amacı ürün veya hizmetlerin kalite seviyelerini arttırmaya yönelik kalite araçlarından kontrol grafiklerinin kullanımını örneklemektir. Yapılan çalıĢmada, hedeflenen kalite düzeyini tespit etmek amacıyla değiĢken nicelikler için kontrol grafikleri (SHEWART), kümülatif toplam kalite kontrol grafikleri (CUSUM) ve üstel ağırlıklı hareketli ortalama kontrol grafikleri (EWMA) kullanılmıĢtır. Farklı tür kontrol grafikleri kullanılarak aralarındaki farklılıklar sunulmuĢtur. Bakır sektöründe yapılan kontrol grafiği analizi yapılacak olan iĢletme uygulamalarına ve teorik çalıĢmalara yardımcı olacaktır.

🔖

Cite This Article

ERTUĞRUL, İ., ÖZÇİL, A. (2022). An Application of “Shewart, Cusum and Ewma” Quality Control Charts into A Manufacturing Business. Karamanoğlu Mehmetbey Üniversitesi Sosyal ve Ekonomik Araştırmalar Dergisi, Cilt: 17 - Sayı: 28, 14–26. https://ajindex.com/articles/570954

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Abbasi, S. A., Riaz, M. ve Miller, A. (2012), “Enhancing the Performance of Cusum Scale Chart”, Computers & Industrial Engineering, 63(2), 400-409.
  2. Akkurt, M. (2002),
  3. Kalite Kontrol Excel Destekli, Birsen Yayınevi, 222 s., Ġstanbul. Allen, T. T. (2006), Introduction to Engineering Statistics and Six Sigma, Springer London, 29 s., England. Baskan, ġ. (1997), Ġstatistiksel Kalite Kontrolü, Ege Üniversitesi Fen Fakültesi Yayınları, No:159, 68-273 ss., Ġzmir. Bostan, H. (2010), “İstatistiksel Proses Kontrol Tekniklerinin Motor Yenileştirme Sürecinde Kullanımı”, Yüksek Lisans Tezi, Balıkesir Üniversitesi,
  4. Fen Bilimleri Enstitüsü, Balıkesir. Chen, K., ve Shaw, Y. (2011), “Applying Back Propagation Network to Cold Chain Temperature Monitoring”, Advanced Engineering Informatics, 25(1), 11-22.
  5. Dai, Y., Luo, Y., Li, Z. ve Wang, Z. (2011), “A New Adaptive Cusum Control Chart for Detecting the Multivariate Process Mean”, Quality and Reliability Engineering International, 27(7), 877-884.
  6. Demir, Y. (2008), “Shewart, Cusum ve Ewma Kontrol Grafiklerinin Makine Sanayine Uygulanması”, Yüksek Lisans Tezi, Yüzüncü Yıl Üniversitesi,
  7. Fen Bilimleri Enstitüsü, Van. Fleischer, J., Gisele, L. ve Matthias, S. (2008), “Statistical Quality Control in Micro Manufacturing Through Multivariate M-Ewma Chart”, CIRP Annals - Manufacturing Technology, 57(1), 521-524.
  8. Han, S. W., Tsui, K., Arijunya, B. and Kim, S. B. (2010), “A Comparison of Cusum, Ewma, and Temporal Scan Statistics for Detection of Increases in Poisson Rates”, Quality and Reliability Engineering International, 26(3), 279-289. IĢığıçok, E. (2012), Toplam Kalite Yönetimi BakıĢ Açısıyla Ġstatistiksel Kalite Kontrol, Ezgi Kitabevi, 2. Baskı, 289-308 ss., Bursa. Maravelakis, P. E. (2012), “Measurement Error Effect on the Cusum Control Chart”, Journal of Applied Statistics, 39(2), 323-336.
  9. Montgomery, D. C. (2005), Introduction to Statistical Quality Control, Fifth Edition, John Wiley And Sons Inc., 197 s., United States of America. Nenes, G. (2011), “A New Approach for the Economic Design of Fully Adaptive Control Charts”, International Journal of Production Economics, 131(2), 631-642.
  10. Nicolay, C. R., Purkayastha, S., Greenhalgh, A., Benn, J., Chaturvedi, S., Phillips, N. And Darzi, A. (2012). “Systematic Review of the Application of Quality Improvement Methodologies From the Manufacturing Industry to Surgical Healthcare”, British Journal of Surgery, 99(3), 324 - 335. Noorossana, R. and Vaghefi, S. J. M. (2006), “Effect of Autoc