The results showed that adding acetylene gas to gasoline by mass increased CO, CO2 and NOx emissions and exhaust gas temperature.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In internal combustion engines, the use of gas fuels is becoming widespread due to its advantages such as low cost and being more environmentally friendly.
📊
Key Findings & Data:In this experimental study, the availability of acetylene gas, a gas fuel, at 1600 rpm, 2400 rpm and 3200 rpm engine speeds in a spark plug-fired engine was investigated.
💡
Conclusion & Impact:The results showed that adding acetylene gas to gasoline by mass increased CO, CO2 and NOx emissions and exhaust gas temperature.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:acetylene gas · air supply coefficient · exhaust emissions
Abstract
In internal combustion engines, the use of gas fuels is becoming widespread due to its advantages such as low cost and being more environmentally friendly. Acetylene is one of the gas fuels seen as an alternative to petroleum-based fuels in internal combustion engines. In this experimental study, the availability of acetylene gas, a gas fuel, at 1600 rpm, 2400 rpm and 3200 rpm engine speeds in a spark plug-fired engine was investigated. Acetylene gas was added to gasoline by 5% and 10% of the mass and its effect on exhaust emissions was studied. The results showed that adding acetylene gas to gasoline by mass increased CO, CO2 and NOx emissions and exhaust gas temperature. HC, oxygen emissions and air supply coefficient decreased.
YILMAZ, İ. T., AKÇAY, M., ÖZER, S., VURAL, E. (2022). The effects of the use of acetylene gas as an alternative fuel in a gasoline engine. International Advanced Researches and Engineering Journal, Cilt: 4 - Sayı: 2, 76–86. https://ajindex.com/articles/539339
Alptekin E. and M. Çanakçı, Biodiesel and the situation in Turkey, Engineer and Machinery, 2006. 47(561): p. 57-64
Özel S., Vural, E., M, Binici, Taguchi method for investigation of the effect of TBC coatings on NiCr bond-coated diesel engine on exhaust gas emissions, International Advanced Researches and Engineering, 2020. 04(01): p. 014-020
Batmaz, İ. Experimental analysis of the effect of hydrogen addition to the fuel on performance and exhaust emissions in spark ignition engines, J. Fac. Eng. Arch. Gazi Univ., 2007. 22(1): p.137-147
Sayın, C., Çanakçı, M., Kılıçaslan, İ N. Özsezen, An experimental analysis of influence of using dual fuel (gasoline+LPG) on engine performance and emissions, J. Fac. Eng. Arch. Gazi Univ., 2005. 20(4): p. 483-490
Sayın, C., Çanakçı, M. İ. Kılıçaslan, Influence of using gasoline+LPG on the performance and emissions of a gasoline engine, Erciyes University Journal of Institute of Science and Technology, 2005. 21(1-2):p.117-127
Çalışır, A. and M. Gümüş, The effect of gasoline-methanol blends on the engine performance and exhaust emission in a spark ignition engine, 5th International Advanced Technologies Symposium (IATS’09), 13-15 May, Karabuk, Turkey, (2009)
Lakshmanan, T. and G. Nagarajan, Experimental investigation on dual operation of acetylene in a DI diesel engine, 2010 Fuel Processing Technology, 2010. 91(2010): p. 496-503
Lakshmanan, T. and G., Nagarajan, Performance and emission of acetylene-aspirated diesel engine, JJMIE, 2009. 3(2): p. 125-130
Jaikumar, S. and S.K., Bhatti, Srinivas, Experimental Explorations of Dual Fuel CI Engine Operating with Guizotia abyssinica Methyl Ester-Diesel Blend (B20) and Hydrogen at Different Compression Ratios, Arabian Journal For Science and Engineering, 2020. 44(12): p. 10195-10205
Meda, V.S. Optimization of Induction Length and Flow Rates of Acetylene in Diesel Engine, Ms Thesis, National Enstitute of Technology, Orissa, İndia, 2011
Paizullakhanov, M.S. and S.A Faiziev, Calcium carbide synthesis using a solar furnace, Technical Physics Letters, 2006. 32(3): p. 211–212
Poděbradská, J., Maděra, J. and V. Tydlitát, Determination of moisture content in hydrating cement paste using the calcium carbide method, Ceramics-Silikáty, 2000. 44(1): pp.35-38
Krammart, P. and S. Tangtermsirikul, Properties of cement made by partially replacing cement raw materials with municipal solid waste ashes and calcium carbide waste, Construction and B