Journals / Geosound / 2008 / Cilt: 0 - Sayı: 53

Point load strength of some rock units and their relations with other material properties

Bazı kaya birimlerinin nokta yükleme dayanımları ve diğer malzeme özellikleri ile ilişkileri

Journal
Geosound
Pages
419–430
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Good relations with high correlations were obtained between point load strength and some physical and mechanical properties.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Within the scope of this study, it was aimed to investigate point load strengths of different rock units and to relate with other material properties.
📊
Key Findings & Data:Within the scope of this study, it was aimed to investigate point load strengths of different rock units and to relate with other material properties.
💡
Conclusion & Impact:Good relations with high correlations were obtained between point load strength and some physical and mechanical properties.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Within the scope of this study, it was aimed to investigate point load strengths of different rock units and to relate with other material properties. Good relations with high correlations were obtained between point load strength and some physical and mechanical properties.

Özet

Bu çalışma kapsamında, değişik kaya birimlerinin nokta yükleme dayanımlarının incelenmesi ve diğer malzeme özellikleri ile ilişkilendirilmesi amaçlanmıştır. Çalışma sonucunda nokta yükleme dayanımı ile bazı fiziksel ve mekanik özellikler arasında anlamlı ve oldukça yüksek korelasyonlu ilişkiler elde edilmiştir.

🔖

Cite This Article

GÜL, Y., CEYLANOĞLU, A. (2022). Point load strength of some rock units and their relations with other material properties. Geosound, Cilt: 0 - Sayı: 53, 419–430. https://ajindex.com/articles/524799

References (5)

  1. Ceylanoğlu, A., 1995, Sivas-Ulaş Sölestit Cevheri ve Yankayaçlarının Bazı Malzeme/Kütle Özelliklerinin Belirlenmesi ve Değerlendirilmesi, Madencilik, Cilt 24, Sayı 4, s. 11-19.
  2. Ceylanoğlu A., Kahriman, A., Durutürk, Y., Uysal, Ö., Gül, Y., 1996, Eskişehir Karaburhan Krom Açık Ocağı Kaya Birimlerinin Kazılabilirlik Sınıflaması ve Örtü/Kazı Birim Maliyet Analizi, Madencilik, Cilt 25, Sayı 3, s. 3-15.
  3. Ceylanoğlu, A., Durutürk, Y.S., 1996, Divriği Demir Açık Ocağı (A-Kafa) Kaya Birimlerinin Kazılabilirlik Açışından Değerlendirilmesi, Yerbilimleri/Geosound, Sayı 29, s. 235-246.
  4. Ceylanoğlu, A., Görgülü, K., Arpaz, E., Durutürk, Y.S., 1999, Bazı Mermer Birimleri İçin Optimum Aşındırma-Cilalama Koşullarını Belirleme Çalışmaları, TÜBİTAK-MİSAG, Proje No:108, Cumhuriyet Üniversitesi, 252 s. ELE, 1993, Civil and Environmental Engineering Test Equipment: 9th Edition Catalogue, Hartfordshire, England, 394 s. Gül, Y., 2006, Bazı Açık işletmelerdeki Değişik Kaya Birimlerinin Taşıma Kapasitelerinin Araştırılması- ve Kayaç Özellikleri ile Ilişkilendirilmesi, Doktora Tezi, C.Ü. Müh. Fak. Maden Müh. Böl., 209 s., Sivas. ISRM, 1981, Rock Charecterization Testing and Monitoring: ISRM Suggested Methods, International Society for Rock Mechanics, 211 s. ISRM, 1985, Suggested Method for Determining Point Load Strength, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 22(2), s. 51-60.
  5. Karakuş, A., 2007, Bazı Mermer Birimleri İçin Optimum Plaka Kesme Koşullarının Araştırılması ve Mermer Malzeme Özellikleri İle İlişkilendirilmesi, Doktora Tezi, C.Ü. Müh. Fak. Maden Müh. Böl., 227 s., Sivas.