Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2006 / Cilt: 21 - Sayı: 1

Determination of the gains used in model reference learning control method with a genetic algorithm

Bulanık model referans öğrenmeli denetim yöntemlerinde kullanılan kazançların bir genetik algoritma ile belirlenmesi

Pages
29–37
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Simulation results showing the effectiveness of the proposed control structure are given in the paper.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Fuzzy Model Reference Learning Control (FMRLC) is a method which provides a systematic design procedure for the design of fuzzy controllers.
📊
Key Findings & Data:During the investigations, it is found that the input and output gains used in the FMRLC system are very effective on the control performance and there is no systematic way in the literature to determine the gains.
💡
Conclusion & Impact:Simulation results showing the effectiveness of the proposed control structure are given in the paper.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Fuzzy Model Reference Learning Control (FMRLC) is a method which provides a systematic design procedure for the design of fuzzy controllers. In most classical fuzzy control systems, some parameters of the membership functions are determined by trial and error method. However, in FMRLC method, these parameters are determined by a learning mechanism. In this paper, the FMRLC method is investigated and applied to the control for the cargo ship steering and, simulation results are presented. During the investigations, it is found that the input and output gains used in the FMRLC system are very effective on the control performance and there is no systematic way in the literature to determine the gains. Therefore, in this study, a Genetic Algorithms (GA) is used to find the input gains which will provide a good control performance. Simulation results showing the effectiveness of the proposed control structure are given in the paper.

Özet

Bulanık Model Referans Öğrenmeli Denetim (BMRÖD), bulanık denetleyicilerin tasarımı için sistematik tasarım prosedürü sağlayan bir yöntemdir. Çoğu klasik bulanık denetim sisteminde, üyelik fonksiyonlarının bazı parametreleri deneme-yanılma yöntemi ile belirlenir. Buna karşın, BMRÖD metodunda, bu parametreler bir öğrenme mekanizması ile belirlenir. Bu makalede, BMRÖD metodu incelenerek kargo gemisi dümen denetimine uygulanmış ve benzetim sonuçları sunulmuştur. İncelemeler sırasında, BMRÖD sisteminde kullanılan giriş ve çıkış kazançlarının denetim performansı üzerinde çok etkili olduğu ve bu kazançların belirlenmesi için literatürde sistematik bir yolun olmadığı tespit edilmiştir. Bu nedenle, bu çalışmada, iyi bir denetim performansı sağlayacak kazançların bulunması için Genetik Algoritma (GA) kullanılmıştır. Sunulan denetim yapısının etkinliğini gösteren benzetim sonuçları makalede verilmiştir.

🔖

Cite This Article

KARADUMAN, Ö., AKPOLAT, Z. H. (2022). Determination of the gains used in model reference learning control method with a genetic algorithm. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 21 - Sayı: 1, 29–37. https://ajindex.com/articles/524148

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Passino,K., and Yurkovich S., Fuzzy Control, Addison-Wesley Publishing Company, 1998. 2.Kickert, W. and Lemke H. V. N., "Application of a fuzzy controller in a warm water plant", Automatica, vol. 12,no. 4, pp. 301-308, 1976. 3.Self, K., "Designing with fuzzy logic", IEEE Spectrum, pp. 42-105 and 105, 1989. 4.Layne, J., Fuzzy model reference learning control, Master's thesis, Department of Electrical Engineering, The Ohio State University, 1992. 5.Astrom, K., and Wittenmark, B., Adaptive Control. Reading, Addison-Wesley Publishing Company, 1989. 6.Procyk, T., and Mamdani, E., "A linguistic self-organizing process controller", Automatica, vol.15, no. 1, pp. 15-30,1979. 7.Scharf, E., and Mandic, N., "The application of a fuzzy controller to the control of a multi-degree- of-freedomrobot arm", in Industrial Applications of Fuzzy Control, pp. 41-62,Amsterdam, the Netherlands: M. Sugeno(ed.), 1985. 8.Tanscheit, R., and Scharf, E, "Experiments with the use of a rule-based self-organising controller for roboticsapplications", Fuzzy Sets and Systems, vol. 26, pp. 195-214, 1988. 9.Yamazaki, T., An improved algorithm for a self-organizing controller and its experimental analysis. PhD thesis, London University, 1982. 10.Layne,J., and Passino, K.,"Fuzzy model reference learning control", Proceedings of the 1st IEEE Conference on Control Applications,pp. 686-691, 1992. 11.Scharf, E., and Mandic, N., "The application of a fuzzy controller to the control of a multi-degree-of-freedomrobot arm", in Industrial Applications of Fuzzy Control, pp. 41-62, Amsterdam, the Netherlands: M. Sugeno(ed.), 1985. 12.Tanscheit, R., and Scharf, E, "Experiments with the use of a rule-based self-organising controller for roboticsapplications", Fuzzy Sets and Systems, vol. 26, pp. 195-214, 1988. 13.Shao, S., "Fuzzy self-organizing controller and its application for dynamic processes", Fuzzy Sets and Systems, vol. 26, pp. 151-164, 1988. 14.Isaka, S., Sebald, A, Karimi, A., Smith, N., and Quinn, M., "On the design and performance evaluation of adaptive fuzzy controllers", Proceedings, IEEE Conference on Decision and Control, pp. 1068-1069, 1988. 15.Daley, S., and Gill, K., F., "Comparison of a fuzzy logic controller with a P+D control law",Journal of Dynamical System, Measurement,and Control, vol. 111, pp. 128-137, 1989. 16.Daley, S., and Gill, K., F., "Altitude control of a spacecraft using an extended self-organizing fuzzy logic controller", Proc. I. Mech. E., vol.201, no. 2, pp. 97-106, 19