Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2007 / Cilt: 22 - Sayı: 3

Effect of silicon content in Al-Si alloys on heat transfer coefficient at casting-mold interface

Al-Si alaşımlarında silisyum miktarının döküm parça-kalıp aryüzey ısı transfer katsayısı üzerine etkisi

Pages
451–459
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The obtained results; the heat transfer coefficients increases as silicon content decreases, the maximum heat transfer coefficient values were obtained; 8900 W/m2K with %7, 14600 W/m2K with %5 and 19100 W/m2K with %3 silicon content.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The objective of the present work was to investigate the effect of silicon content on the interfacial heat transfer coefficient (IHTC) for vertically upward unidirectional solidification of Al-Si casting on water cooled cupper chills during solidification.
📊
Key Findings & Data:The interfacial heat transfer coefficient measured as a function of different silicon content was determined by using finite difference method solving FORTRAN language.
💡
Conclusion & Impact:The obtained results; the heat transfer coefficients increases as silicon content decreases, the maximum heat transfer coefficient values were obtained; 8900 W/m2K with %7, 14600 W/m2K with %5 and 19100 W/m2K with %3 silicon content.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The objective of the present work was to investigate the effect of silicon content on the interfacial heat transfer coefficient (IHTC) for vertically upward unidirectional solidification of Al-Si casting on water cooled cupper chills during solidification. The interfacial heat transfer coefficient measured as a function of different silicon content was determined by using finite difference method solving FORTRAN language. The obtained results; the heat transfer coefficients increases as silicon content decreases, the maximum heat transfer coefficient values were obtained; 8900 W/m2K with %7, 14600 W/m2K with %5 and 19100 W/m2K with %3 silicon content.

Özet

Bu çalışmanın amacı katılaşma süresince su soğutmalı bakır soğutucu üzerinde tek yönlü dikey olarak katılaşan Al-Si alaşımlarında silisyum içeriğinin arayüzey ısı transferi katsayısına etkisini incelemektir. Arayüzey ısı transfer katsayısı silisyum içeriğine bağlı olarak, Sonlu Farklar Metoduna dayalı FORTRAN programı ile belirlenmiştir. Sonuç olarak; arayüzey ısı transfer katsayısı silisyum içeriğinin azalması ile artmıştır, maksimum arayüzey ısı transfer katsayısı değerleri; %7Si’de 8900 W/m2K, %5Si’de 14600 W/m2K ve %3Si’de 19100 W/m2K olarak elde edilmiştir.

🔖

Cite This Article

YALÇIN, N., AKAR, N. (2022). Effect of silicon content in Al-Si alloys on heat transfer coefficient at casting-mold interface. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 22 - Sayı: 3, 451–459. https://ajindex.com/articles/524076

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Şahin, H.M., Kocatepe, K., Kayıkcı R. ve Akar, N., “Determination of Unidirectional Heat Transfer Coefficient during Unsteady State Solidification at Metal Chill Interface”, Energy Conversion and Management, 47, 19–34, 2006
  2. Şahin, H.M., Kocatepe, K., Kayıkcı R. ve Akar, N., “Ötektik Al-Si Alaşımında Soğutucu Yüzey Pürüzlülüğünün Arayüzey Isı Transfer Katsayısına Etkisi”, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Cilt 21, No 3, 473-481, 2006
  3. Kim, T.G. ve Lee, Z.H., “Time-varying Heat Transfer Coefficients Between Tube-Shaped Casting and Metal Mold”, International Journal of Heat and Mass Transfer, 40, 3513-3525, 1997
  4. Lee, Z.H., Kim, T.G. ve Choi, Y.S., “The Movement of the Concave Casting Surface during Mushy-Type Solidification and Its Effect on the Heat-Transfer Coefficient”, Metallurgical and Materials Transactions B, 29, 1051-1056, 1998
  5. Fortin, G, Louchez, P. ve Samuel, F H, “Factors Controlling Heat Transfer Coefficients at the Metal-Mold Interface during Solidification of Aluminum Alloys: An Analytical Study”, AFS Transactions, 100, 863-871, 1992
  6. Hao, S.W., Zhang, Z.Q., Chen, J.Y., ve Liu, P.C., “Heat Transfer at the Metal-Mold Interface in Ductile Iron”, AFS Transactions, 95, 601-608, 1987
  7. Sharma, D.G.R. ve Krishnan, M., “Simulation of Heat Transfer at Casting Metal-Mold Interface“, AFS Transactions, 99, 429-438, 1991
  8. Taha, M.A., El-Mahallawy, N.A., El-Mestekawi, M.T. ve Hassan A.A., “Estimation of Air Gap and Heat Transfer Coefficient at Different Faces of Al And Al-Si Castings Solidifying in Permanent Mould”, Materials Science And Technology, 17, 1093-1101, 2001
  9. Santos, C.A., Quaresma, J.M.V. ve Garcia, A., “Determination of Transient Interfacial Heat Transfer Coefficients in Chill Mold Casting”, Journal of Alloys and Compounds, 319, 174- 186, 2001
  10. Santos, C.A., Siqueira, C.A., Garcia, A., Quaresma, J.V.M. ve Spim, J.A., “Metal/Mold Heat Transfer Coefficients during Horizontal and Vertical Unsteady-State Solidification of Al-Cu and Sn-Pb Alloys”, 4th International Conference on Inverse Problems in Engineering, Rio de Janeiro, Brazil, 2002
  11. Siqueira, C.A., Cheung, N. ve Garcia, A., “The Columnar To Equiaxed Transition During Solidification of Sn–Pb Alloys”, Journal of Alloys and Compounds, 351, 126–134, 2003
  12. Peres, M.D., Siqueira, C.A. ve Garcia, A., “Macrostructural and Microstructural Development in Al–Si Alloys Directionally Solidified under Unsteady-State Conditions”, Journal of Al