Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2010 / Cilt: 25 - Sayı: 3

The effect of electrokinetic spesification features to hydration development in fly ash blended cement

Uçucu kül katkılı çimento hidratasyonuna elektrokinetik özelliklerin etkisi

Pages
449–457
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thesevariations effected on compressive strength of mortar samples.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, surface interaction mechanisms of the reference (OPC) and fly ash blended cements (FAC) wereinvestigated.
📊
Key Findings & Data:After cement pasteswere prepared with OPC and FA, they were water-cured for 2, 7 and 28 days.
💡
Conclusion & Impact:Thesevariations effected on compressive strength of mortar samples.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, surface interaction mechanisms of the reference (OPC) and fly ash blended cements (FAC) wereinvestigated. The physical, chemical, mineralogical and mechanical properties of OPC, fly ash (FA) and FAC, aswell as the electrokinetic potentials (zeta potential) of FA-OPC particles were examined. After cement pasteswere prepared with OPC and FA, they were water-cured for 2, 7 and 28 days. The pastes were made using X-raydiffraction (XRD), differential thermal analysis (DTA) and Fourier transform infrared spectroscopy (FT-IR) inorder to determine their mineralogical composition and the determination of the phases developed during thehydration. Furthermore by scanning electron microscope (SEM) 28 days microstructures of pastes weredetermined and mortars were examined following strength tests. While the addition of FA has increased thesetting time and the amount of water demand, amount of portlandit (Ca (OH)2) decreased during the hydration.Moreover FA has shown different electrokinetic behaviors and surface features compared to OPC. Thesevariations effected on compressive strength of mortar samples.

Özet

Bu çalışmada, referans (PÇ) ve uçucu kül katkılı çimentonun (UKKÇ) yüzey etkileşim mekanizmalarıaraştırılmıştır. PÇ, uçucu kül (UK) ve UKKÇ’nin fiziksel, kimyasal, mineralojik ve mekanik özelliklerinin yanısıra UK-PÇ tanelerinin elektrokinetik potansiyelleri (zeta potansiyel) belirlenmiştir. PÇ ve UK ile hazırlanançimento pastaları 2, 7 ve 28 gün küre tabi tutulmuştur. Bu pastaların, hidratasyon sırasında mineralojik yapısınıve faz gelişimini belirlemek için termal analiz (DTA ve TG), X-ışınları difraksiyonu (XRD) ve fouriertransformlu kızılötesi spektroskopisi (FT-IR) analizleri yapılmıştır. Ayrıca 28 günlük mikro yapıları taramalıelektron mikroskop (SEM) ile belirlenmiş ve harç numuneleri, dayanım testleri yapılarak incelenmiştir. UK; suihtiyacını ve priz süresini arttırırken, hidratasyon süresince açığa çıkan portlandit (Ca(OH)2) miktarınıazaltmıştır. Ayrıca UK, PÇ’ye göre farklı elektrokinetik davranışlar ve yüzey özellikleri göstermiştir. Bufarklılıklar harç örneklerinin dayanımlarını etkilemiştir.

🔖

Cite This Article

YILMAZ, B., UÇAR, A., KOÇAK, Y., DORUM, A. (2022). The effect of electrokinetic spesification features to hydration development in fly ash blended cement. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 25 - Sayı: 3, 449–457. https://ajindex.com/articles/523805

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Aruntaş, H.Y., “Uçucu küllerin inşaat sektöründe kullanım potansiyeli”, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 21 (1): 193-203, 2006
  2. Yalçın H., Gürü M., Çimento ve Beton, Palme Yayıncılık, Ankara, 2006
  3. Erdoğan, T.Y., Beton, ODTÜ Geliştirme Vakfı Yayıncılık ve İletişim AŞ., Ankara, 2003
  4. Ernst, W., Nathan M., Lynn P., “Potentials for energy efficiency improvement in the US cement industry”, Energy, 25 (12): 1189-1214, 2000
  5. Shiqun, L., Della, M.R., “Investigation of relations between porosity, pore structure, and C1− diffusion of fly ash and blended cement pastes”, Cement and Concrete Research, 16 (5): 749-759, 1986
  6. Canpolat, F., Yılmaz, K., “Doğal zeolit ve uçucu kül katkılı ve katkısız harçların sülfat dayanıklılığı”, Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 2: 1- 15 2002
  7. Saraswathy, V., Muralidharan, S., Thangavel, K., Srinivasan, S., “Influence of activated fly ash on corrosion-resistance and strength of concrete”, Cement and Concrete Composites, 25 (7): 673- 680, 2003
  8. Fu, X., Wang, Y., Huang, S., Hou X., Hou, W., “The influences of siliceous waste on blended cement properties”, Cement and Concrete Research, 33 (6): 851-856, 2003
  9. Fu, X., Wang, Z., Tao, W., Yang, C., Hou, W., Dong, Y., Wu, X., “Studies on blended cement with a large amount of fly ash”, Cement and Concrete Research, 32 (7): 1153-1159, 2002
  10. Chindaprasirt, P., Homwuttiwong, S., Sirivivatnanon, V., “Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar”, Cement and Concrete Research, 34 (7): 1087-1092, 2004
  11. Çelik M.H., Aruntaş, H.Y., Baran Y., “Seyitömer ve çayırhan uçucu küllerinin Portland çimentosu- uçucu kül pastasının priz başlama ve sonu sürelerine etkisi”, Politeknik Dergisi,, 6 (1): 397-409, 2003
  12. Dorum A., Tekin İ., “Uçucu kül ikameli çimento harcının basınç dayanımı ve priz zamanına distile su etkisinin araştırılması”, Politeknik Dergisi, 7 (3): 243-250, 2004
  13. Drazan, J., Zelic, J., “The effect of fly ash on cement hydratıon in aqueous suspensions”, Ceramics− Silikaty, 50 (2): 98-105, 2006
  14. Roy, D.M., Arjunan, P., Silsbee, M.R., “Effect of silica fume, metakaolin, and low-calcium fly ash on chemical resistance of concrete”, Cement and Concrete Research, 31: 1809–1813, 2001
  15. Puertas, F., Fernandez-Jimenez, A., Blanco- Varela, M.T., “Pore solution ın alkali-activated slag cement pastes. Relation to the composition and structure of