SavedAdd your journal

Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2010 / Cilt: 25 - Sayı: 3

Thermal modelling of machining mechanism in electrical discharge machining

Elektro erozyon ile işlemede işleme mekanizmasının ısıl modellenmesi

Can ÇOĞUN
Yasin SARIKAVAK
Pages
517–531
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, thedeveloped model has been validated by comparing the theoretical material removal results with the experimentalones.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, theoretical model of workpiece material removal in electrical discharge machining (EDM) wasdeveloped.
📊
Key Findings & Data:Developed model includes severalaspects like, generated energy formed by the electrical discharge in liquid media, plasma channel radius variationand heat transfer from the channel.
💡
Conclusion & Impact:Finally, thedeveloped model has been validated by comparing the theoretical material removal results with the experimentalones.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, theoretical model of workpiece material removal in electrical discharge machining (EDM) wasdeveloped. Thermo-electrical model was developed for a single discharge. Developed model includes severalaspects like, generated energy formed by the electrical discharge in liquid media, plasma channel radius variationand heat transfer from the channel. By using different experimental study parameters used in literature, effect ofgenerated energy in plasma channel on workpiece was investigated. The developed model evaluates thetemperature distribution in the workpiece material using finite element solver ANSYS Workbench (v.11)software. It’s assumed that the workpiece material reaches the melting point of workpiece material was removedfrom the surface. Electrical discharge process was simulated by using transient thermal analysis. Finally, thedeveloped model has been validated by comparing the theoretical material removal results with the experimentalones.

Özet

Bu çalışmada, elektro erozyon ile işlemede işparçası malzemesinin aşınmasının sonlu elemanlar yöntemi ilemodellemesi yapılmıştır. Isıl-elektriksel model, tek bir boşalım için geliştirilmiştir. Geliştirilen model dielektriksıvı içerisinde elektriksel boşalım sonucu oluşan enerjiyi, plazma kanalı genişliğini ve ortamda meydana gelenısı transferlerini içermektedir. Literatürde yer alan deneysel çalışma parametreleri kullanılarak, plazma kanalındaoluşan enerjinin işparçası malzemesinde oluşturduğu sıcaklık dağılımı incelenmiştir. Ergime sıcaklığının üstüneçıkan işparçası malzemesinin ergime kraterinden kaldırıldığı kabul edilmiştir. Çalışmada, sonlu elemanlaryöntemini kullanarak analiz yapan ANSYS Workbench v.11 programı kullanılmıştır. Elektro erozyon ile işlemetekniği zamana bağlı ısıl analiz yöntemi kullanılarak simüle edilmiştir. Farklı işleme parametrelerinde eldeedilen teorik sonuçların deneysel sonuçlarla büyük ölçüde örtüştüğü görülmüştür.

🔖

Cite This Article

ÇOĞUN, C., SARIKAVAK, Y. (2022). Thermal modelling of machining mechanism in electrical discharge machining. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 25 - Sayı: 3, 517–531. https://ajindex.com/articles/523759

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Özgedik, A., Çoğun, C., "An experimental investigation on tool wear in electric discharge machining", Int. Journal of Advanced Manufacturing Technology, Cilt 27, 488-500 (2006)
  2. DiBitonto, D. D., Eubank, P. T., Patel,M. R., Barrufet M. A., "Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model", J. Appl. Phys., Cilt 66 (9), 4095-4103 (1989)
  3. Patel, M. R., Barrufet, M. A., Eubank, P. T., DiBitonto D. D., "Theoretical models of the electrical discharge machining process. II. The anode erosion model", J. Appl. Phys., Cilt 66 (9), 4104-4111 (1989)
  4. Eubank, P. T., Patel, M. R., Barrufet, M. A., Bozkurt, B., "Theoretical models of the electrical discharge machining process. III. The variable mass, cylindrical plasma model", J. Appl. Phys., Cilt 73 (11), 7900-7909 (1993)
  5. Marafona, J., Chousal, J. A. G., "A finite element model of EDM based on the Joule effect", Int. Journal of Machine Tools & Manufacture, Cilt 46, 595-602 (2006)
  6. Kansal, H. K., Singh, S., Kumar, P., "Numerical simulation of powder mixed electric discharge machining (PMEDM) using finite element method", Mathematical and Computer Modelling, Cilt 10, 1-21 (2007)
  7. Das, S., Klotz, M., Klocke, F., "EDM simulation: finite element-based calculation of deformation, microstructure and residual stresses", Journal of Materials Processing Technology, Cilt 142, 434-451 (2003)
  8. Yadav, V., Jain, V. K., Dixit, P. M., "Thermal stresses due to electrical discharge machining", Int. Journal of Machine Tools & Manufacture, Cilt 42, 877-888 (2002)
  9. Snoeys, R., Van Dijck, F., “Investigations of EDM operations by means of thermo mathematical model", Annals of CIRP, Cilt 20(1), 35 (1971)
  10. Salah, N. B., Ghanem, F., Atig, K. B., "Numerical study of thermal aspects of electric discharge machining process", Int. Journal of Machine Tools & Manufacture, Cilt 46, 908- 911(2006)
  11. Kumar, P. D., "Study of thermal stresses induced surface damage under growing plasma channel in electro-discharge machining", Journal of Materials Processing Technology, Cilt 202, 86- 95 (2008)
  12. Singh, A., Ghosh, A., "A thermo-electric model of material removal during electric discharge machining", Int. Journal of Machine Tools & Manufacture, Cilt 39, 669-682 (1999)
  13. Allen, P., Chen, X., "Process simulation of micro electro-discharge machining on molybdenum", Journal of Materials Processing Technology, Cilt 186, 346-355 (2007). 14. 14.Kumar, P. D.,Bhoi, R. K., "Anal