SavedAdd your journal

Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2020 / Cilt: 35 - Sayı: 4

Theoretical Analysis on the Thermal and Electrical Properties of Fiber Reinforced Laminates Modified with CNTs

Karbon Nanotüp ile Modifiye Edilmiş Fiber Takviyeli Laminelerin Isıl ve Elektriksel Özelliklerinin Teorik Analizi

Fatih DARICIK
Alparslan TOPCU
Pages
925–936
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results were then compared and it was found out that the MWCNTS has a significant effect on the electrical conductivity of the epoxy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the present study, the effect of the multi-walled carbon nanotubes (MWCNTs) fillers weight fraction on the mechanical, electrical, and thermal properties of the epoxy was calculated analytically.
📊
Key Findings & Data:The results were then compared and it was found out that the MWCNTS has a significant effect on the electrical conductivity of the epoxy.
💡
Conclusion & Impact:MWCNTs fix the mismatch between the hygrothermal properties of the epoxy matrix and the carbon fiber.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In the present study, the effect of the multi-walled carbon nanotubes (MWCNTs) fillers weight fraction on the mechanical, electrical, and thermal properties of the epoxy was calculated analytically. The results were then compared and it was found out that the MWCNTS has a significant effect on the electrical conductivity of the epoxy. The MWCNT modified epoxy composites were considered as the matrix material to design quasi-isotropic carbon fibre/epoxy composite. The change of the weight fraction of the MWCNTs on the mechanical, electrical, and thermal properties of the carbon fibre/epoxy laminates was also calculated. Finally, the hygrothermal load and the bending load response of the laminated composites were researched. MWCNTs fix the mismatch between the hygrothermal properties of the epoxy matrix and the carbon fiber.

Özet

Bu çalışmada, çoğul duvarlı karbon nanotüplerin (MWCNT) epoksinin mekanik, elektrik ve ısıl özellikleri üzerindeki etkisi analitik olarak hesaplanmıştır. MWCNT’nin epoksinin elektriksel iletkenliği üzerinde önemli bir etkiye sahip olduğu bulunmuştur. MWCNT modifiyeli epoksi malzeme ile karbon fiber/epoksi tabakalı kompozit malzemeler tasarlanmıştır. MWCNT’lerin ağırlıkça katkısının karbon fiber/epoksi kompozitlerin mekanik, elektriksel ve termal özellikleri üzerindeki etkisi de hesaplanmıştır. Son olarak, MWCNT takviyeli tabakalı kompozitlerin higrotermal yük ve eğilme yükü altındaki tepkileri araştırılmıştır. MWCNT’lerin, epoksi matris ve karbon fiberin ısı ve neme bağlı özellikleri arasındaki uyumsuzluğu azalttığı sonucuna varılmıştır.

🔖

Cite This Article

DARICIK, F., TOPCU, A. (2022). Theoretical Analysis on the Thermal and Electrical Properties of Fiber Reinforced Laminates Modified with CNTs. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 35 - Sayı: 4, 925–936. https://ajindex.com/articles/485248

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Gojny, F.H., Wichmann, M.H.G., Fiedler, B., Bauhofer, W., Schulte, K., 2005. Influence of Nano-Modification on the Mechanical and Electrical Properties of Conventional Fibre- Reinforced Composites, Compos. Part A Appl. Sci. Manuf., 36, 1525–1535. doi:10.1016/j. compositesa.2005.02.007
  2. Wichmann, M.H.G., Sumfleth, J., Gojny, F.H., 2006. Glass-fibre-reinforced Composites with Enhanced Mechanical and Electrical Properties -Benefits and Limitations of a Nanoparticle Modified Matrix, Eng. Fract. Mech., 73(16), 2346–2359. doi:10.1016/j.engfracmech.2006. 05.015
  3. Chen, Q., Zhang, L., Rahman, A., Zhou, Z., Wu, X., Fong, H., 2011. Hybrid Multi-scale Epoxy Composite Made of Conventional Carbon Fiber Fabrics with Interlaminar Regions Containing Electrospun Carbon Nanofiber Mats, Compos. Part A, 42, 2036–2042. doi:10.1016/j.compositesa.2011. 09.010
  4. Ashrafi, B., Díez-Pascual, A.M., Johnson, L., Genest, M., Hind, S., Martinez-Rubi, Y., González-Domínguez, J.M., Martínez, M.T., Simard, B., Gómez-Fatou, M.A., Johnston, A., 2012. Processing and Properties of PEEK/ Glass Fiber Laminates: Effect of Addition of Single-Walled Carbon Nanotubes. Compos. Part A, 43, 1267–1279. doi:10.1016/j. compositesa.2012.02.022
  5. Ashrafi, B., Naffakh, M., Di, A.M., Gonza, M., Johnston, A., Simard, B., Martínez, M.T., Gómez-Fatou, M.A., 2011. Influence of Carbon Nanotubes on the Thermal, Electrical and Mechanical Properties of Poly (Ether Ether Ketone)/Glass Fiber Laminates, Carbon, 49(8), 2817-2833. doi:10.1016/j.carbon.2011.03.011. 6. da Costa, E.F.R., Skordos, A.A., Partridge, I.K., Rezai, A., 2012. RTM Processing and Electrical Performance of Carbon Nanotube Modified Epoxy/fibre Composites, Compos. Part A Appl. Sci. Manuf., 43, 593–602. doi:10.1016/j.compositesa.2011.12.019
  6. Socher, R., Krause, B., Boldt, R., Hermasch, S., Wursche, R., Pötschke, P., 2011. Melt Mixed Nano Composites of PA12 with MWNTs: Influence of MWNT and Matrix Properties on Macrodispersion and Electrical Properties. Compos. Sci. Technol., 71, 306–314. doi:10.1016/j.compscitech.2010.11. 015
  7. Han, S., Meng, Q., Araby, S., Liu, T., Demiral, M., 2019. Mechanical and Electrical Properties of Graphene and Carbon Nanotube Reinforced Epoxy Adhesives: Experimental and Numerical Analysis. Compos. Part A Appl. Sci. Manuf., 120, 116–126. doi:10.1016/j.compositesa.2019. 02.027
  8. Ma, P.C., Siddiqui, N.A., Marom, G., Kim, J.K., 2010. Dispersion and Functionalization of Carbon Nanotubes for Polymer-Based Nanocompo