Journals / Clinical and Experimental Health Sciences / 2021 / Cilt: 11 - Sayı: 3

Comparison Of The Effect Of Surface Conditioning Methods On The Bond Strength Of Different Zirconia Reinforced Lithium Silicate And Hybrid Ceramics To Resin Cement

Pages
554–563
Publication Date
2021-09-27
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Although, the SR values of the materials are high in the A and AS group, the highest SBS values were observed in the H and HS treated surfaces.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The objective of this study was to evaluate the effect of surface conditioning methods on shear bond strength (SBS) of a resin composite bonded to CAD/CAM materials.
📊
Key Findings & Data:The zirconia-reinforced lithium silicate (Vita Suprinity VS, and Celtra Duo CD) and hybrid ceramics (Vita Enamic, VE and Nacera Hybrid NH) were used. 80 specimens from each material were fabricated following the manufacturer’s instructions and divided into 8 groups according to surface treatments.
💡
Conclusion & Impact:Although, the SR values of the materials are high in the A and AS group, the highest SBS values were observed in the H and HS treated surfaces.
🔬Design:Research Article
📍Scope:80 specimens
⚙️Variables:shear bond strength · surface roughness · hybrid ceramic

Abstract

OBJECTIVE. The objective of this study was to evaluate the effect of surface conditioning methods on shear bond strength (SBS) of a resin composite bonded to CAD/CAM materials. METHODS. The zirconia-reinforced lithium silicate (Vita Suprinity VS, and Celtra Duo CD) and hybrid ceramics (Vita Enamic, VE and Nacera Hybrid NH) were used. 80 specimens from each material were fabricated following the manufacturer’s instructions and divided into 8 groups according to surface treatments. These were; Gr 1 (control, no treatments (K)), Gr 2 (hydrofluoric acid H), Gr 3 (H+ Silane S), Gr 4 (abraded with 50-micron alumina particles A), Gr 5 (A+ S), Gr 6 (abraded with 30-micron Cojet sand C), Gr 7 (C+S), Gr 8 (S). The average surface roughness (SR) of the specimens was measured. Surface treated specimens were cemented to the resin cement (Panavia F 2.0) for testing the adhesion using the shear bond strength SBS test and were tested. Mean SR and SBS results were analyzed by 2-way ANOVA with the material type and surface treatments as the independent variables. RESULTS. The highest surface roughness values were observed in the A and AS groups. Both hybrid ceramics VE and NH showed the highest SR values among surface treatments. The highest SBS values were found usually on the H and HS treated surfaces. The highest values were observed on the CD material in the HS group (18,01MPa) and followed by the VE material (16,25 MPa) in the CS group. The failure mode for CD and VS materials was found adhesive and cohesive failures and for VE and NH materials adhesive, and mixed cohesive failure was observed. CONCLUSION. The surface treatment showed a significant effect on the SR and SBS values. Although, the SR values of the materials are high in the A and AS group, the highest SBS values were observed in the H and HS treated surfaces.

🔖

Cite This Article

SEVMEZ, H., YILMAZ, H. (2021). Comparison Of The Effect Of Surface Conditioning Methods On The Bond Strength Of Different Zirconia Reinforced Lithium Silicate And Hybrid Ceramics To Resin Cement. Clinical and Experimental Health Sciences, Cilt: 11 - Sayı: 3, 554–563. https://ajindex.com/articles/481255

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. . Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014
  2. . Albero A, Pascual A, Camps I, Grau-Benitez M.J. Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network. Clin Exp Dent 2015
  3. e495-500. [3]. Pisani-Proenca J, Erhardt MC, Valandro LF, Gutierrez-Aceves G, Bolanos-Carmona MV, Del Castillo-Salmeron R, Bottino MA. Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic. J Prosthet Dent 2006
  4. . Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003
  5. . Denry I, Kelly JR. Emerging ceramic-based materials for dentistry. J Dent Res 2014
  6. . Gracis S, Thompson VP, Ferencz JL, Silva NR, Bonfante EA. A new classification system for all-ceramic and ceramic-like restorative materials. Int J Prosthodont 2015
  7. . Beuer F, Stimmelmayr M, Gueth JF, Edelhoff D, Naumann M. In vitro performance of full-contour zirconia single crowns. Dent Mater 2012
  8. . Sun T, Zhou S, Lai R, Liu R, Ma S, Zhou Z, Longquan S. Load-bearing capacity and the recommended thickness of dental monolithic zirconia single crowns. J Mech Behav Biomed Mater 2014
  9. . Elsaka SE, Elnaghy AM. Mechanical properties of zirconia reinforced lithium silicate glass-ceramic. Dent Mater 2016
  10. . Aboushelib MN, Sleem D. Microtensile bond strength of lithium disilicate ceramics to resin adhesives. J Adhes Dent 2014
  11. . Pneumans M, Valjakova EB, Munck JD, Mishevska CB, Meerbeek BV. Bonding Effectiveness of Luting Composites to Different CAD/CAM Materials. J Adhes Dent 2016
  12. . Sato TP, Anami LC, Melo RM, Valandro LF, Bottino MA. Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic. Oper Dent 2016
  13. . Chen C, Trindade FZ, de Jager N, Kleverlaan CJ, Feilzer AJ. The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknesses. Dent Mater 2014
  14. . Rohr N, Flury A, Fischer J. Efficacy of a Universal Adhesive in the Bond Strength of Composite Cements to Polymer-infiltrated Ceramic. J Adhes Dent 2017
  15. . Bellan MC, Cunha PFJSD, Tavares JG, Spohr AM, Mota EG. Microtensile bond strength of CAD/CAM materials to dentin under different adhesive