Journals / Cumhuriyet Dental Journal / 2011 / Cilt: 14 - Sayı: 2

Surface preparations of zirconia based full ceramic restorations before cementation

Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları

Pages
140–153
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Various surface treatment methods to improve the bonding between the zirconium oxide ceramic restoration and resin luting cement had been described in this article.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Longevity of all ceramic restorations in the oral environment is related to successful bonding of ceramic restorations on the tooth surface via appropriate luting cement.
📊
Key Findings & Data:However, resin luting cements are preferred due to their superior retentive properties, better seal of marginal discrepancies and increased fracture strength.
💡
Conclusion & Impact:Various surface treatment methods to improve the bonding between the zirconium oxide ceramic restoration and resin luting cement had been described in this article.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Longevity of all ceramic restorations in the oral environment is related to successful bonding of ceramic restorations on the tooth surface via appropriate luting cement. Zincphosphate or modified glass ionomer cements can be utilized for the cementation of zirconium oxide restorations. However, resin luting cements are preferred due to their superior retentive properties, better seal of marginal discrepancies and increased fracture strength. Establishing a reliable bond in the interface of the recently developed zirconium oxide ceramic restorations and resin cements is still an ongoing problem. Application of ceramic etching acids and silane compounds on zirconium oxide ceramic restorations is not adequate for the bond strength. There are currently not sufficient information concerning surface treatment methods for zirconium oxide restorations and their efficiency. Various surface treatment methods to improve the bonding between the zirconium oxide ceramic restoration and resin luting cement had been described in this article.

Özet

Tam seramik restorasyonların uzun dönem başarısı, uygun bir simanla yapıştırılmasına bağlıdır. Çinko fosfat simanlar ve modifiye cam iyonomer simanlar zirkonyum oksit restorasyonların simantasyonunda kullanılabilirler. Fakat, resin simanlar tutuculuk özelliklerinin daha iyi olması, marjinal uyumsuzluk problemlerinin daha az olması ve kırılma dayanıklılığının yüksek olmasından dolayı daha fazla tercih edilmektedir. Son zamanlarda gelistirilen zirkonyum oksit seramik restorasyonlar ve rezin simanlar arasındaki bağlantının arttırılması hala devam eden bir sorundur. Zirkonyum oksit seramik restorasyonların üzerinde, asitleme işlemleri ve silan uygulaması yeterli bir bağlantı kuvveti sağlamamaktadır. Zirkonyum oksit restorasyonların resin simanlarla bağlantı dayanımını arttırmak için uygulanan farklı yüzey işlemleri hakkında literatürde yeterli bilgi mevcut değildir. Bu makalede zirkonyum oksit restorasyonlar ve rezin simanlar arasındaki bağlantı kuvvetini arttırmak için uygulanan çeşitli yüzey işlemlerinden bahsedilecektir.

🔖

Cite This Article

ULUDAMAR, A., AKALIN, B., KULAK, Y. Ö. (2022). Surface preparations of zirconia based full ceramic restorations before cementation. Cumhuriyet Dental Journal, Cilt: 14 - Sayı: 2, 140–153. https://ajindex.com/articles/477265

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Blatz MB, Sadan A, Kern M. Resin ceramic bonding: A review of literature. J Prosthet Dent 2003;89:268-274
  2. Chong KH, Chai J, Takahashi Y, Wozniak W. Flexural strength of inceram alumina and in-ceram zirconia core materials. Int J Prosthodont 2002; 15: 183-188
  3. Guazzato M, Albakry M, Ringer SM, Swain MV. Strength, fracture toughness and microstructre of a selection of all ceramic materials: Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449- 456
  4. Raigrodski AJ. Contemporary materials and technologies for allceramic fixed partial dentures: A review of the literature. J Prosthet Dent 2004;92:557-562
  5. Walton JN, Gardner FM, Agar JR. A survey of crown and fixed partial denture failures: length of service and reasons for replacement. J Prosthet Dent 1986;56:416-421
  6. Diaz-Arnold AM, Vargas MA, Haselton DR. Current status of luting agents for fixed prosthodontics, J Prosthet Dent 1999;81:135-141
  7. El Zohairy AA, De Gee AJ, Mohsen MM, Feilzer AJ. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 2003;19:575-583
  8. Li ZC, White SN. Mechanical properties of dental luting cements, J Prosthet Dent 1999;81:597-609
  9. McLaren EA. All-Ceramic Alternatives to Conventional Metal Ceramic Restorations, Compend Contin Educ Dent 1998;19:307-326
  10. Allen EP, Bayne SC, Becker IM, Donovan TE, Hume WR, Kois JC. Annual review of selected dental literature: report of committee on scientific investigation of the American Academy of Restorative Dentistry. J Prosthet Dent 1999;82:27-66
  11. Öztürk AN. Farklı seramik inleylerin direkt, indirekt ve klasik tekniklerle dentine bağlanma dayanımlarının karsılastırılması 2001; Doktora tezi, Konya
  12. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: A review of the current literature, J Prosthet Dent 1998;80:280-301
  13. Roulet JF. Degradation of Dental Polymers, Karger Publications, Basel; New York. 1987
  14. Phillips RW. Skinner’s Science of Dental Materials, W.B. Saunders Company, 9th Edition, Philadelphia. 1991
  15. Magne P, Belser U. Bonded Porcelain Restorations in the Anterior Dentition: A Biomimetic Approach. Quintessence Publishing. Chapter 8. 2003
  16. Öztürk Ö, Uludağ B. Kompozit rezin esaslı yapıstırma simanları ve adeziv simantasyon tekniği TDBD 2002;6:33-39
  17. Ernst C-P, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents, J Prosthet Dent