Journals / Cumhuriyet Dental Journal / 2019 / Cilt: 22 - Sayı: 1

EFFECTS OF DIFFERENT GLAZE TREATMENTS ON THE OPTICAL PROPERTIES AND ROUGHNESS OF LITHIUM DISILICATE CERAMICS

Farklı Glaze İşlemlerinin Lityum Disilikat Seramiklerin Optik Özellik ve Pürüzlülük Üzerindeki Etkileri

Pages
48–55
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Before and after ageing, the EL group exhibited highertranslucency than the other groups (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objectives: To investigate effects of different glaze procedures on the colour,translucency, and roughness of lithium disilicate (LDS) ceramics after short-termageing.Materials and Methods: Eighteen LDS specimens (thickness: 0.6 mm) weredivided into three groups (paste (EP), spray (ES), and powder–liquid glaze (EL))based on the type of glaze treatment (n=6).
📊
Key Findings & Data:After glaze firings, specimens werethermally aged (5000 cycles).
💡
Conclusion & Impact:Before and after ageing, the EL group exhibited highertranslucency than the other groups (p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Objectives: To investigate effects of different glaze procedures on the colour,translucency, and roughness of lithium disilicate (LDS) ceramics after short-termageing.Materials and Methods: Eighteen LDS specimens (thickness: 0.6 mm) weredivided into three groups (paste (EP), spray (ES), and powder–liquid glaze (EL))based on the type of glaze treatment (n=6). After glaze firings, specimens werethermally aged (5000 cycles). Before and after thermocycling, the colour,translucency, and roughness values of the specimens were measured. Before andafter thermocycling, the translucency and roughness data were analysed using aone-way analysis of variance (ANOVA) and compared using a Wilcoxon signedrank test. Changes in colour, translucency, and roughness data were analysedusing one-way ANOVA, and the correlations between them were analysed usingSpearman’s correlation analysis (p=.05).Results: The EL group showed the highest and clinically unacceptable colourchange value (p≤.005). Before and after ageing, the EL group exhibited highertranslucency than the other groups (p

Özet

Amaç: Farklı glaze işlemlerinin lityum disilikat seramiklerin (LDS) renk, translüsensi ve pürüzlülük üzerindeki etkisinin kısa dönem yaşlandırma sonunda incelenmesidir. Gereç ve Yöntemler: On sekiz LDS örnek (kalınlık: 0,6 mm) yapılan glaze işlemine göre üç gruba (pasta (EP), sprey (ES), toz-likit glaze (EL)) ayrıldı (n=6). Glaze fırınlamaları sonrası tüm örnekler termal olarak yaşlandırıldı (5000 devir). Yaşlandırma öncesi ve sonrası örneklerin renk, translüsensi ve pürüzlülük değerleri ölçüldü. Yaşlandırma öncesi ve sonrası translüsensi ve pürüzlülük verileri tek yönlü varyans analizi (ANOVA) ile analiz edildi ve Wilcoxon işaretli sıralar testi ile karşılaştırıldı. Renk, translüsensi ve pürüzlülük değişim verileri tek yönlü ANOVA ile analiz edildi ve aralarındaki kolerasyonlar Spearman kolerasyon analizi ile analiz edildi (p=,05). Bulgular: EL grubu en yüksek ve klinik olarak kabul edilemez renk değişim değeri göstermiştir (p≤,005). Yaşlandırma öncesi ve sonrası, EL grubu diğer gruplardan daha yüksek translüsensi değeri göstermiştir (p

🔖

Cite This Article

Subaşı, G. M., Alp, G. (2022). EFFECTS OF DIFFERENT GLAZE TREATMENTS ON THE OPTICAL PROPERTIES AND ROUGHNESS OF LITHIUM DISILICATE CERAMICS. Cumhuriyet Dental Journal, Cilt: 22 - Sayı: 1, 48–55. https://ajindex.com/articles/476960

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Batson ER, Cooper LF, Duqum I, Mendonça G. Clinical outcomes of three different crown systems with CAD/CAM technology. J Prosthet Dent 2014; 112:770-777
  2. Ng J, Ruse D, Wyatt C. A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent 2014; 112:555- 560
  3. Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011; 56:84–96
  4. Yu B, Ahn JS, Lee YK. Measurement of translucency of tooth enamel and dentin. Acta Odontol Scand 2009; 67:57-64
  5. Giordano R. Materials for chairside CAD/CAM– produced restorations. J Am Dent Assoc 2006; 137:14- 21
  6. Pieger S, Salman A, Bidra AS. Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: A systematic review. J Prosthet Dent 2014; 112:22-30
  7. Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: effects of foundation restoration. J Prosthet Dent 2013; 110:501– 509
  8. Barizon KT, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG, Geraldeli S. Ceramic materials for porcelain veneers. Part I: Correlation between translucency parameters and contrast ratio. J Prosthet Dent 2013; 110:397-401
  9. Spink LS, Rungruanganut P, Megremis S, Kelly JR. Comparison of an absolute and surrogate measure of relative translucency in dental ceramics. Dent Mater 2013; 29:702-707. 10. de Oliveira AL, Botta AC, Campos JÁ, Garcia PP. Effects of immersion media and repolishing on color stability and superficial morphology of nanofilled composite resin. Microsc Microanal 2014; 20:1234- 1239
  10. Erdemir U, Yildiz E, Eren MM. Effects of sports drinks on color stability of nanofilled and microhybrid composites after long-term immersion. J Dent 2012; 40 Suppl 2:55-63
  11. Lund PS, Piotrowski TJ. Color changes of porcelain surface colorants resulting from firing. Int J Prosthodont 1992; 5:22-27
  12. Kim IJ, Lee YK, Lim BS, Kim CW. Effect of surface topography on the color of dental porcelain. J Mater Sci Mater Med 2003; 14:405-409
  13. Wang H, Xiong F, Zhenhua L. Influence of varied surface texture of dentin porcelain on optical properties of porcelain specimens. J Prosthet Dent 2011; 105:242- 248
  14. Gönülol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent 2012; 40 Suppl 2:64-70
  15. Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: Effects of cement co