Journals / Cumhuriyet Dental Journal / 2019 / Cilt: 22 - Sayı: 1

EFFECT OF SURFACE FINISHING METHODS AND AGING ON SURFACE ROUGHNESS AND OPTICAL PROPERTIES OF ZIRCONIA-REINFORCED LITHIUM SILICATE GLASS-CERAMIC

Yüzey Bitirme İşlemlerinin ve Yaşlandırmanın Zirkonya ile Güçlendirilmiş Lityum Silikat CamSeramik Materyalinin Optik Özellik ve Pürüzlülüğü Üzerindeki Etkileri

Pages
121–130
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A significant difference wasobserved between the translucency values for different surface finishing groupsbefore aging (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objectives: The effects of three different surface finishing methods and aging onthe surface roughness and optical properties of zirconia-reinforced lithium silicate(ZLS) glass-ceramic were investigated.Materials and Methods: Rectangular specimens (0.6 mm thickness) were slicedfrom ZLS blocks (N=36).
📊
Key Findings & Data:Three different types of surface finishing [glazingcombined with crystallization (ZLS-CF) or after crystallization (ZLS-G) andpolishing (ZLS-P)] (n=12) and 5000 thermocycles were applied.
💡
Conclusion & Impact:A significant difference wasobserved between the translucency values for different surface finishing groupsbefore aging (p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Objectives: The effects of three different surface finishing methods and aging onthe surface roughness and optical properties of zirconia-reinforced lithium silicate(ZLS) glass-ceramic were investigated.Materials and Methods: Rectangular specimens (0.6 mm thickness) were slicedfrom ZLS blocks (N=36). Three different types of surface finishing [glazingcombined with crystallization (ZLS-CF) or after crystallization (ZLS-G) andpolishing (ZLS-P)] (n=12) and 5000 thermocycles were applied. Three sets ofmeasurements were performed before and after aging to determine the colorcoordinates and surface roughness (Ra) by using a colorimeter and profilometer,respectively. The mean surface roughness (Ra) values were calculated. Colordifferences and translucency parameter (TP) values were calculated using thecolor difference ΔEab and TP formulas. One-way ANOVA was used to analyzethe color difference, translucency, and surface roughness values (α=.05).Results: Significant differences in the ΔE values were not observed (p=.736) forspecimens with different types of surface finishing. A significant difference wasobserved between the translucency values for different surface finishing groupsbefore aging (p

Özet

Amaç: Bu çalışmanın amacı üç farklı yüzey bitirme yönteminin ve yaşlandırmanın, zirkonya ile güçlendirilmiş lityum silikat (ZLS) cam-seramiğin yüzey pürüzlülüğü ve optik özellikleri üzerindeki etkilerini araştırmaktır. Gereç ve Yöntemler: Dikdörtgen şeklindeki örnekler (0,6 mm kalınlıkta) ZLS bloklardan (N=36) kesildi. Üç farklı tipte yüzey bitirme işlemi [kristalizasyon ile birlikte glazür (ZLS-CF), kristalizasyon sonrası glazür (ZLS-G) ve polisaj (ZLS-P)] (n=12) ve 5000 termal siklus uygulandı. Yaşlandırma öncesi ve sonrasında üçer defa renk koordinatları ve yüzey pürüzlülüğü (Ra) ölçümleri kolorimetre ve profilometre cihazları kullanılarak yapıldı. Ortalama yüzey pürüzlülüğü (Ra) değerleri hesaplandı. Renk farklılıkları ve translusensi parametresi (TP) değerleri, ΔEab renk farklılığı ve TP formülleri kullanılarak hesaplandı. Renk farkı, translusensi ve yüzey pürüzlülük değerlerini analiz etmek için tek-yönlü ANOVA kullanıldı (α=,05). Bulgular: Farklı yüzey bitirme tiplerine sahip örneklerde ΔE değerlerinde anlamlı farklılıklar gözlenmedi (p=,736). Yaşlandırma öncesinde farklı tipteki yüzey bitirme gruplarında translusensi değerleri arasında anlamlı fark gözlendi (p

🔖

Cite This Article

Subaşı, G. M., Alp, G. (2022). EFFECT OF SURFACE FINISHING METHODS AND AGING ON SURFACE ROUGHNESS AND OPTICAL PROPERTIES OF ZIRCONIA-REINFORCED LITHIUM SILICATE GLASS-CERAMIC. Cumhuriyet Dental Journal, Cilt: 22 - Sayı: 1, 121–130. https://ajindex.com/articles/476952

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Preis V, Hahnel S, Behr M, Bein L, Rosentritt M. In-vitro fatigue and fracture testing of CAD/CAMmaterials in implant-supported molar crowns. Dent Mater 2017;4:427-433
  2. Villarroel M, Fahl N, De Sousa AM, De Oliveira OB Jr. Direct esthetic restorations based on translucency and opacity of composite resins. J Esthet Restor Dent 2011;23:73-87
  3. Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015;113:534-540
  4. Kim HK, Kim SH. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014;30:229-237
  5. Rinke S, Rödiger M, Ziebolz D, Schmidt AK. Fabrication of zirconia-reinforced lithium silicate ceramic restorations using a complete digital workflow. Case Rep Dent 2015;2015:162-178
  6. Alp G, Subasi MG, Johnston WM, Yilmaz B. Effect of surface treatments and coffee thermocycling on the color and translucency of CAD-CAM monolithic glass-ceramic. J Prosthet Dent 2018;120:263-268
  7. Al-Thagafi R, Al-Zordk W, Saker S. Influence of surface conditioning protocols on reparability of CAD/CAM zirconia-reinforced lithium silicate ceramic. J Adhes Dent 2016;18:135-141
  8. Belli R, Wendler M, de Ligny D, Cicconi MR, Petschelt A, Peterlik H, Lohbauer U. Chairside CAD/CAM materials. Part 1: measurement of elastic constants and microstructural characterization. Dent Mater 2017;33:84-98
  9. Traini T, Sinjari B, Pascetta R, Serafini N, Perfetti G, Trisi P, Caputi S. The zirconia-reinforced lithium silicate ceramic: lights and shadows of a new material. Dent Mater J 2016;35:748-755
  10. Choi S, Yoon HI, Park EJ. Load-bearing capacity of various CAD/CAM monolithic molar crowns under recommended occlusal thickness and reduced occlusal thickness conditions. J Adv Prosthodont 2017;9:423- 431
  11. Elsaka SE, Elnaghy AM. Mechanical properties of zirconia reinforced lithium silicate glass-ceramic. Dent Mater 2016;32:908-914
  12. Schwindling FS, Rues S, Schmitter M. Fracture resistance of glazed, full-contour ZLS incisor crowns. J Prosthodont Res 2017;61:344-349
  13. Aboushelib MN, Sleem D. Microtensile bond strength of lithium disilicate ceramics to resin adhesives. J Adhes Dent 2014;16:547-552
  14. Fasbinder DJ. Clinical performance of chairside CAD/CAM restorations. J Am Dent Assoc 2006;137:22-31
  15. Kilinc H, Turgut S. Optical behaviors of esthetic CAD-CAM restorations aft