SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2016 / Cilt: 26 - Sayı: 2

A RESEARCH FOR SPINNING SILK/COTTON BLEND ON OPEN-END ROTOR SPINNING SYSTEM

İPEK/PAMUK KARIŞIMININ OPEN-END ROTOR İPLİK EĞİRME SİSTEMİNDE EĞRİLMESİ ÜZERİNE BİR ARAŞTIRMA

Esra AKBAŞ
Pınar ÇELİK
Pages
221–229
Publication Date
2016-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, air permeability and abrasion resistance of the fabrics were decreased with increasing silk ratio on them

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Silk is a special and expensive natural fiber.
📊
Key Findings & Data:This spinning system has cost advantages because of its less process needs and high production rate in comparison with ring spinning system.
💡
Conclusion & Impact:Also, air permeability and abrasion resistance of the fabrics were decreased with increasing silk ratio on them
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:İpek Artığı · Open-end Rotor İplikçiliği · İplik Özellikleri

Abstract

Silk is a special and expensive natural fiber. It enhances added value of products that its used in. Open-end rotor spinning system is the second most favorite spinning system in short staple fiber spinning systems after ring spinning. This spinning system has cost advantages because of its less process needs and high production rate in comparison with ring spinning system. In this study, spinnability of silk fiber in open-end rotor spinning system was investigated. The effects of silk fiber ratio in blends, twist coefficient, rotor speed, rotor type, opening roller type and speed to yarn properties were investigated. Furthermore, single jersey fabrics were produced by Mesdan-lab 294E with medium stitch density and the effect of silk fiber ratio on air permeability, abrasion resistance (through weight loss), surface friction coefficient, thickness and weight of fabrics were investigated. Yarn hairiness and breaking elongation were increased with increasing silk ratio on yarns. Also, air permeability and abrasion resistance of the fabrics were decreased with increasing silk ratio on them

Özet

İpek özel ve pahalı bir liftir. Bulunduğu ürünün özelliklerini ve katma değerini artırır. Open-end rotor iplikçiliği, kısa lif iplikçiliğinde ring iplik eğirme yönteminden sonra en çok tercih edilen eğirme yöntemidir. Üretim prosesi ring iplikçiliğine göre daha kısa ve üretim hızı daha yüksek olduğu için maliyet açısından daha avantajlıdır. Bu çalışmada, open-end rotor iplikçiliğinde ipek lifinin eğrilebilirliğinin incelenmesi amaçlanmıştır. Karışımda ipek oranının, büküm katsayısının, rotor hızının, rotor tipinin, açıcı silindir hızının ve açıcı silindir tipinin iplik özelliklerine etkisi incelenmiştir. Ayrıca Mesdan-lab 294E numune örme makinesinde orta sıklıkta süprem kumaşlar örülerek, karışımda ipek oranının hava geçirgenliği, aşınma dayanımı (ağırlık kaybı), patlama mukavemeti, yüzey sürtünme katsayısı, kumaş kalınlığı ve gramajı değerlerine etkisi incelenmiştir. Karışımda ipek oranı arttıkça iplik kopma uzaması (%) artmış, iplik tüylülüğü değerleri yükselmiştir. Kumaşlarda da ipek oranının artışına bağlı olarak hava geçirgenliği değeri ve aşınma dayanımı azalmıştır

🔖

Cite This Article

AKBAŞ, E., ÇELİK, P. (2016). A RESEARCH FOR SPINNING SILK/COTTON BLEND ON OPEN-END ROTOR SPINNING SYSTEM. Tekstil ve Konfeksiyon, Cilt: 26 - Sayı: 2, 221–229. https://ajindex.com/articles/46120

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Yazıcıoğlu, G., Gülümser, G., 1993, İpek ve Diğer Salgı Lifleri, İzmir
  2. Chollakup, R., Osselin, J.F., et al., 2008a, Effects of Blending Parameters on the Cross-section Fiber Migration of Silk/Cotton Blends, Textile Research Journal, 78(4):361-369
  3. Chollakup, R., Sinoimeri, A., Philippe, et al., 2004, Tactile sensory analysis applied to silk/cotton knitted fabrics, International Journal of Clothing Science and Technology, Vol. 16, Issue: 1/2, 132 – 140
  4. Chollakup, R., Sinoimeri, A., Dréan, J-Y., 2003, Influence of blending factors: blending method, type and the proportion of silk waste on Thai silk/cotton yarn characteristics, In Book of Abstracts of The Fiber Society, Spring 2003 Technical Meeting, June 30-July 2, 2003, Loughborough University, Loughborough, UK, p. 131-132
  5. Chollakup, R., Suesat, J., Ujjin, S.,2008b, “Effect of Blending Factors on Eri Silk and Cotton Blended Yarn and Fabric Characteristics”, Macromol.Symp., 264, 44-49 (
  6. Chollakup, R., Suesat, J., Ujjin, S., 2010, Influence of Eri silk fiber on physical characteristics and dyeing properties of Eri silk/cotton blended yarn, Color Technol.126(1): 42-47
  7. Kumar, R., Chattopadhyay, R., Sharma, I.C., 2001, Feasibility of Spinning Silk/Silk Blends On Cotton System, Textile Asia, February: 21-31
  8. Loghavi, A., Najar, S.S., Etrati, S.M., et al., 2008, “A Study of Spinning Persian Silk Waste/Cotton Blends on Rotor Spinning System” (
  9. Matsumoto, Y., Tsuchiya, I., et al., 1991b, Irregularities of Blended Yarns in Waste Silk Spinning System, Journal of Sericultural Science of Japan, 60(4):263-269
  10. Matsumoto, Y., Tsuchiya, I., Kyuma, H., 1989, Effects of Yarn Structures in Composite Spun Silk Yarns, Journal of Sericultural Science of Japan, 58(1):7- 14
  11. Matsumoto, Y., Tsuchiya, I., Toriumi K., 1991a, Silk/Cotton/Scoured Silk Core Twin Spun Yarns, Textile Research Journal, 61(3):131-136
  12. Matsumoto, Y., Tsuchiya, I., Toriumi K., 1992, Properties of Double-Core Twin Spun Silk Yarns and Fabrics, Textile Research Journal, 62(12):710-714
  13. Nibikora I., Wanga J., Optimum Selection of the Opening Roller and Navel for Rotor Spun Silk/Cashmere Blended Yarn, FIBRES & TEXTILES in Eastern Europe, 2010, Vol. 18, No. 5 (82), 35-38
  14. Özgüney, A.T.,Seçim, P., Demir, A., et al., 2015, Ecological Printing of Madder Over Various Natural