SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2009 / Cilt: 9 - Sayı: 3

FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS

Aylin ŞAKAR-DELİORMANLI
Erdal ÇELİK
Mehmet POLAT
Pages
105–110
Publication Date
2009-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that hydroxypropyl methycellulose (HPMC) has some influence on the stress formation due to its effect on the surface tension of the suspension.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Drying behavior of PMN films were investigated using a cantilever deflection based device and scanning probe microscope.
📊
Key Findings & Data:Drying stress of the films was measured as a function of suspension composition.
💡
Conclusion & Impact:Results showed that hydroxypropyl methycellulose (HPMC) has some influence on the stress formation due to its effect on the surface tension of the suspension.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Roughness · Tape Casting · Ceramic Suspensions

Abstract

Drying behavior of PMN films were investigated using a cantilever deflection based device and scanning probe microscope. Drying stress of the films was measured as a function of suspension composition. Results showed that hydroxypropyl methycellulose (HPMC) has some influence on the stress formation due to its effect on the surface tension of the suspension. On the other hand roughness measurements showed that HPMC has insignificant effect on the roughness of the films and roughness is mainly depended on the binder content of the suspensions.

Özet

Drying behavior of PMN films were investigated using a cantilever deflection based device and scanning probe microscope. Drying stress of the films was measured as a function of suspension composition. Results showed that hydroxypropyl methycellulose (HPMC) has some influence on the stress formation due to its effect on the surface tension of the suspension. On the other hand roughness measurements showed that HPMC has insignificant effect on the roughness of the films and roughness is mainly depended on the binder content of the suspensions.

🔖

Cite This Article

ŞAKAR-DELİORMANLI, A., ÇELİK, E., POLAT, M. (2009). FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 9 - Sayı: 3, 105–110. https://ajindex.com/articles/452238

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Kiennemann, J., Chartier, T., Pagnoux, C., Baumard, J.F., Huger, M., and Lamerant, J.M., Drying Mechanism and Stress Development in Aqueous Alumina Tape Casting, Journal of the European Ceramic Society, Vol. 25, No.9, Pages 1551-1564, 2005
  2. Tian, T., Jiang, D., Zhang, J., and Lin, Q., Aqueous Tape Casting Process for Hydroxyapatite, Journal of the European Ceramic Society, Vol. 27, No.7, Pages 2671–2677, 2007
  3. Cui, X., Ouyang, S., Yu, Z., Wang, C., and Huang, Y., A Study on Green Tapes for LOM with Water Based Tape Casting Processes, Materials Letters, Vol. 57, Pages 1300-1304, 2003
  4. Hotza, D. and Greil, P., Review: Aqueous Tape Casting of Ceramic Powders, Materials Science and Engineering, Vol. A202, Pages 206-217, 1995
  5. Martinez, C.J., and Lewis, J., Rheological, Structural, and Stress Evolution of Aqueous Al2O3: Latex Tape Cast Layers, Journal of the American Ceramic Society, Vol. 85, No.10, Pages 2409-16, 2002
  6. Chiu, R.C. and Cima, M.J., Drying of Granular Ceramic Films: II, Drying Stress, Saturation Uniformity, Journal of the American Ceramic Society, Vol. 76, Pages 2769-2777, 1993
  7. Scherer, G.W., Theory of Drying, Journal of the American Ceramic Society, Vol. 73, No.1, Pages 3-14, 1990
  8. Scherer, G.W., Aging and Drying of Gels, Journal of Non-Crystalline Solids, Vol. 100, Pages 77-92, 1988
  9. Şakar-Deliormanlı, A., Çelik,E., and Polat, M., Preparation of the Pb(Mg1/3Nb2/3)O3 Films by Aqueous Tape Casting, Journal of the European Ceramic Society, Vol. 29, Pages 115-123, 2009
  10. Lewis, J.A., Colloidal Processing of Ceramics, Journal of the American Ceramic Society, Vol. 83, No.10, Pages 2341-59, 2000
  11. Smay, J.E., Directed Colloidal Assembly and Characterization of PZT Polymer Composites, PhD thesis, University of Illinois at Urbana Champaign, 2002
  12. Smay, J.E. and Lewis, J.A., Structural and Property Evolution of Aqueous Based Lead Zirconate Titanate Tape Cast Layers, Journal of the American Ceramic Society, Vol. 84, No.11, Pages 2495-500, 2001
  13. Martinez, C.J., Structure and Property Evolution during Film Formation from Binary Colloidal Suspensions, PhD Thesis, University of Illinois at Urbana Champaign, 2002.