Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2018 / Cilt: 18 - Sayı: 1

Cleaning of Ultra–fine Coal by Physicochemical Methods

Çok İnce Boyutlu Kömürün Fizikokimyasal Yöntemlerle Temizlenmesi

Pages
315–323
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In oil agglomeration tests, the highest combustible recovery was found to be 87.15% using 10% waste oil, while, in aggloflotation tests, 92.18% combustible recovery was obtained using 1% waste oil.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An increase in amount of ultra–fine coal particles was observed due to the implementation of mechanized production methods in coal mining.
📊
Key Findings & Data:In this study, amenability of ultra–fine (d80= 43.47 µm) Müzret coal with high ash (35.65%) and sulphur (7.91%) to cleaning using flotation, oil agglomeration and aggloflotation methods was investigated.
💡
Conclusion & Impact:In oil agglomeration tests, the highest combustible recovery was found to be 87.15% using 10% waste oil, while, in aggloflotation tests, 92.18% combustible recovery was obtained using 1% waste oil.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

An increase in amount of ultra–fine coal particles was observed due to the implementation of mechanized production methods in coal mining. Technical difficulties were encountered in beneficiation of those coals. Therefore, it is of importance to determine technically suitable methods for cleaning of ultra–fine coals. In this study, amenability of ultra–fine (d80= 43.47 µm) Müzret coal with high ash (35.65%) and sulphur (7.91%) to cleaning using flotation, oil agglomeration and aggloflotation methods was investigated. The concentrate with highest combustible recovery (93.45%) was obtained by aggloflotation method. The highest efficiency index 41.68% was achieved by flotation. In oil agglomeration tests, the highest combustible recovery was found to be 87.15% using 10% waste oil, while, in aggloflotation tests, 92.18% combustible recovery was obtained using 1% waste oil.

Özet

Kömür madenciliğinde mekanize kazı yöntemlerinin uygulanmasıyla birlikte oluşan çok ince boyutlu kömür miktarında artış gözlenmiştir. Bu kömürlerin temizlenmesinde teknik zorluklarla karşılaşılmaktadır. Bu nedenle, çok ince boyutlu kömürlerin temizlenmesi amacıyla teknik açıdan uygun yöntem(ler)in belirlenmesi önem arz etmektedir. Bu çalışmada, yüksek kül (%35,65) ve kükürt (%7,91) içerikli çok ince boyutlu (d80= 43,47 µm) Müzret kömürünün flotasyon, yağ aglomerasyonu ve agloflotasyon yöntemleri ile temizlenebilirliği araştırılmıştır. En yüksek yanabilir verime (%93,45) sahip konsantre agloflotasyon yöntemi ile elde edilmiştir. En fazla verim indeksi değerine %41,68 flotasyon ile ulaşılmıştır. Yağ aglomerasyonu deneylerinde %10 atık yağ miktarında elde edilen en yüksek yanabilir verim %87,15 iken, agloflotasyonda %1 atık yağ miktarında %92,18 yanabilir verim elde edilmiştir.

🔖

Cite This Article

ŞAHİNOĞLU, E. (2022). Cleaning of Ultra–fine Coal by Physicochemical Methods. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 18 - Sayı: 1, 315–323. https://ajindex.com/articles/429954

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Abakay Temel, H., 2010. The aggoflotation of a mixture of subbituminous coal and gangue minerals using Şirnak asphaltite and the concentrate obtained from Zonguldak bituminous coal. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 32, 1248–1259.
  2. Abakay Temel, H. ve Bozkurt, V., 2008. AdıyamanGölbaşı linyitinin yıkama olanaklarının araştırılması. Madencilik, 47 (4), 13–21.
  3. Aksay., E.K., Arslan, V. ve Polat., 2010. Toz kömürlerin zenginleştirilmesinde yağ aglomerasyonu yöntemi ve yenilikler. İstanbul Yerbilimleri Dergisi, 23 (2), 97–108.
  4. Bayat, O., 2008. Tunçbilek kömür yıkama tesisi ara ürününün jameson hücresinde flotasyonu, Madencilik, 47 (1), 27–34.
  5. Canpolat, L., 2003. Taşkömürünün yağ aglomerasyonu, flotasyon ve yağ aglomerasyonu-flotasyon yöntemiyle zenginleştirilebilirliğinin incelenmesi, Yüksek Lisans Tezi, Cumhuriyet Üniversitesi Fen Bilimleri Enstitüsü, Sivas, 88. Cebeci, Y. ve Eroglu, N., 1998. Determination of bridging liquid type in oil agglomeration of lignites, Fuel, 77 (5), 419–424. Doymuş K., 1997. Bazı Türk linyitlerinin seçimli yağ aglomerasyonu ile temizlenebilirliklerinin incelenmesi. Doktora Tezi, Atatürk Üniversitesi Fen Bilimleri Enstitüsü, Erzurum, 121. Gence, N., 2006. Coal recovery from bituminous coal by aggloflotation with petroleum oils. Fuel, 85, 1138–1142.
  6. Hoşten, Ç. ve Uçbaş, Y., 1989. Zonguldak toz kömürleri üzerinde yağ aglomerasyonu çalışmaları. Türkiye Madencilik Bilimsel ve Teknik 11. Kongresi, Maden Mühendisleri Odası Yayını, Ankara, 355–365.
  7. Jaiswal, S., Tripathy, S.K ve Banerjee, P.K., 2015. An overview of reverse flotation process for coal. International Journal of Mineral Processing, 134, 97–110.
  8. Kawatra, S.K. ve Eisele, T.C., 2001. Coal desulfurization high-efficiency preparation methods, Department of Mining and Materials Processing Engineering Michigan Technological University, 240–224.
  9. Mehrotra, V.P., Sastry, K.V.S. ve Morey, B.W., 1983. Review of oil agglomeration techniques for processing of fine coals. International Journal of Mineral Processing, 11, 175–201.
  10. Peng, Y., Liang, L., Tan, J., Sha, J. ve Xie, G., 2015. Effect of flotation reagent adsorption by different ultra-fine coal particles on coal flotation. International Journal of Mineral Processing, 142, 17–21.
  11. Shrauti, S.M. ve Arnold, D.W., 1995. Recovery of waste fine coal by oil agglomeration, Fuel, 74 (3), 459-465.
  12. Sönmez, İ. ve Cebeci, Y., 2006. Performance of classic oils and lubricating oils in froth flotation of Ukraine co