SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2019 / Cilt: 19 - Sayı: 1

Optimization of Cathodic Arc-PVD TiN Coating Process Parameters on the Gold-like Decoration of Ceramic Tiles

Seramik Karoların Altın Dekorasyonunda Katodik Ark- FBB TiN Kaplama Proses Parametrelerinin Optimizasyonu

Belgin TANIŞAN
Tugay TOSUN
Pages
186–192
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that, processing conditions that are considered to be close to obtaining stoichiometric TiN (550 sccm-150 A and 650 sccm-200 A) resulted in gold-like coloured TiN coating, similar to commercial ones.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the optimization of Cathodic Arc PVD process parameters to obtain gold-like colour TiN coating for ceramic tile decoration was aimed.
📊
Key Findings & Data:Glazed ceramic tiles as substrate, pure Ti discs as cathode and nitrogen (N2) as reactive gas were used in the coating unit.
💡
Conclusion & Impact:It was observed that, processing conditions that are considered to be close to obtaining stoichiometric TiN (550 sccm-150 A and 650 sccm-200 A) resulted in gold-like coloured TiN coating, similar to commercial ones.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the optimization of Cathodic Arc PVD process parameters to obtain gold-like colour TiN coating for ceramic tile decoration was aimed. Glazed ceramic tiles as substrate, pure Ti discs as cathode and nitrogen (N2) as reactive gas were used in the coating unit. Coating trials were performed at constant deposition time (90 s) and varying cathode currents (100-150-200 A) and N2 gas flow rate (550-650-750 sccm). L*a*b* colour parameters were measured by spectrofotometer and compared with that of commercial TiN coatings. It was observed that, processing conditions that are considered to be close to obtaining stoichiometric TiN (550 sccm-150 A and 650 sccm-200 A) resulted in gold-like coloured TiN coating, similar to commercial ones.

Özet

Bu çalışmada, seramik karo yüzeyinde dekoratif altın renginde TiN kaplamalar üretmek için Katodik ArkFBB proses parametrelerinin optimizasyonu amaçlanmıştır. Kaplama ünitesinde; altlık malzemesi olaraksırlı seramik karolar, katot olarak saf Ti diskler ve reaktif gaz olarak da nitrojen (N2) kullanılmıştır.Kaplama işlemi; sabit biriktirme süresinde (90 sn), katod akımı (100-150-200A) ve N2 akış oranı (550-650-750 sccm) değiştirilerek gerçekleştirilmiştir. Üretilen kaplamaların L*a*b* renk parametrelerispektrafotometre ile ölçülmüş ve ticari TiN kaplamaların L*a*b* değerleri ile karşılaştırılmıştır. Sonuçolarak, TiN stokiyometrisine yakın olduğu düşünülen proses parametreleri ile (550 sccm-150 A ve 650sccm-200 A) ticari TiN kaplamalara benzer altın renginde kaplamalar üretilmiştir.

🔖

Cite This Article

TANIŞAN, B., TOSUN, T. (2022). Optimization of Cathodic Arc-PVD TiN Coating Process Parameters on the Gold-like Decoration of Ceramic Tiles. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 19 - Sayı: 1, 186–192. https://ajindex.com/articles/429868

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Alberdi, A.A., Lucas M.F., Belda P.A. and Bueno, Z.R.M., 2005. Method of producing ceramic tiles having a metallic finish and the tile thus produced. Europ. Patent No: EP 1498402 A1 Alves, L.A., Sagas, J.C., Damiao, A.J. and Fontana, L.C., 2015. Drude’s model optical parameters and the color of TiNx films obtained through reflectivity measurements. Braz. J. Physics, 45, 59-63.
  2. Kim, H.J. and Joun, M.S., 2007. Effects of deposition temperature and time on the surface characteristics of TiN-coated high-speed steel by arc ion plating. Journal of Mechanichal Science and Technology, 21, 575-584.
  3. Larpkiattaworn, S., Chokwatvikul, C., Surinphong, S. and Termsuksaward, P., 2013. Properties of (Ti,Al)N film prepared by PVD cathodic arc. Suranaree J. of Science and Technology, 20 (3), 221-226.
  4. Lousa, A., Esteve, J., Mejia, J.P. and Devia, A., 2007. Influence of deposition pressure on the structural mechanical and decorative properties of TiN thin films deposited by cathodic arc evaporation, Vacuum, 81, 1507-1510.
  5. Manova, D., Gerlach, J.W. and Mandl, S., 2010. Thin film deposition using energetic ions. Materials, 2, 4109-4141.
  6. Mubarak, A., Hamzah, E. and Toff, M.R.M., 2005. Review of PVD techniques for hard coating, Jurnal Mekanikal, 20, 42-51.
  7. Niyomsoan, S., Grant, W., Olson, D.L and Mishra, B., 2002. Variation of color in titanium and zirconium nitride decorative thin films. Thin Solid Films, 415,187-194.
  8. Öncel, S., 2002. Katodik ark FBB yöntemi ile dekoratif amaçlı Cr-O-N kaplamaların üretilmesi, Yüksek Lisans Tezi, İTÜ Fen Bilimleri Enstitüsü, İstanbul, 68. Richert M., Mazurkiewicz, A. and Smolik, J., 2010. Chromium carbide coatings obtained by the hybrid PVD methods. Journal of Achievements in Materials and Manufacturing Engineering, 43, 145-152.
  9. Sönmezoğlu, S., Koç, M. ve Akın, S., 2012. İnce film üretim teknikleri. Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 28(5), 389-401.
  10. Vaz, F., Machado, P., Rebouta, L. and Mendes, J.A., 2002. Physical and morphological characterization of reactively magrettron sputtered TiN films. Thin Solid Films, 421-428.
  11. Zeghni, A., 2003. The effect of thin film coatings and nitriding on the mechanical properties and wear resistance of tool steel, Master Thesis, School of Mechanical and Manufacturing Engineering, Dublin City University, Dublin, 150.