Journals / ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE / 2019 / Cilt: 7 - Sayı: 1

Determination of Optimal Reading Conditions by Taguchi Method

Optimal Okuma Şartlarının Taguchi Yöntemiyle Belirlenmesi

Pages
24–32
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results revealed that low light level, maximum font type size, and low music volume are the optimum reading conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Computers are regarded as an indispensable part of daily and business life.
📊
Key Findings & Data:L16(45 ) orthogonal experimental design was employed during the experimental studies, and the reading speed was selected as the performance measure.
💡
Conclusion & Impact:The results revealed that low light level, maximum font type size, and low music volume are the optimum reading conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Computers are regarded as an indispensable part of daily and business life. In many occupations, people work by reading from computer screens. This study intends to identify the optimum environment conditions for reading on computer screens especially for academicians. To this end, light level, music level, and font size were accepted as the factors influencing reading, and four different levels were set for each. To identify the factor levels that maximize the reading speed, Taguchi method, which produces the optimal factor levels with minimum experiment, was used. L16(45 ) orthogonal experimental design was employed during the experimental studies, and the reading speed was selected as the performance measure. The results revealed that low light level, maximum font type size, and low music volume are the optimum reading conditions.

Özet

Bilgisayarların günlük hayatın ve iş hayatının ayrılmaz bir parçası olduğu bilinmektedir. Birçok meslek grubunda insanlar bilgisayar ekranından metin okuyarak çalışmaktadır. Bu çalışmada, özellikle üniversitede çalışan akademisyenler için bilgisayar ekranından yapacakları okumalarda en iyi ortam şartlarının belirlenmesi amaçlanmıştır. Bu amaçla, bilgisayardan yapılan okumaları etkileyen üç unsur ışık seviyesi, müzik seviyesi ve punto büyüklüğü olarak ele alınmış ve her unsur için dört farklı seviye belirlenmiştir. Unsurların okuma hızını en yüksek yapacak seviyelerini belirlemek için az sayıda deneyle en iyi unsur seviyelerini tespit eden Taguchi Yöntemi tercih edilmiştir. Çalışma esnasında L16(45 ) ortogonal deney tasarım planı kullanılmış ve okuma hızı performans ölçütü olarak belirlenmiştir. Elde edilen sonuçlara göre ekran ışık seviyesinin hafif, punto büyüklüğünün en fazla ve müzik seviyesinin hafif olduğu ortamın yapılacak okuma çalışması için ideal olduğu anlaşılmıştır.

🔖

Cite This Article

Keskin, M. E., Yilmaz, M. (2022). Determination of Optimal Reading Conditions by Taguchi Method. ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, Cilt: 7 - Sayı: 1, 24–32. https://ajindex.com/articles/427258

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. .Taguchi, G., 1986. Introduction to quality engineering: designing quality into products and processes. [2].Zhang, J.Z., Chen, J.C. and Kirby, E.D., 2007. Surface roughness optimization in an end-milling operation using the Taguchi design method. Journal of materials processing technology, 184(1), pp.233-239. [3].Nalbant, M., Gökkaya, H. and Sur, G., 2007. Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials & design, 28(4), pp.1379-1385. [4].Tzeng, C.J., Lin, Y.H., Yang, Y.K. and Jeng, M.C., 2009. Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis. Journal of materials processing technology, 209(6), pp.2753-2759. [5].Kilickap, E., 2010. Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite. Expert Systems with Applications, 37(8), pp.6116-6122. [6].Asiltürk, I. and Neşeli, S., 2012. Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis. Measurement, 45(4), pp.785-794. [7].Engin, A.B., Özdemir, Ö., Turan, M. and Turan, A.Z., 2008. Color removal from textile dyebath effluents in a zeolite fixed bed reactor: Determination of optimum process conditions using Taguchi method. Journal of hazardous materials, 159(2), pp.348-353. [8].Lin, Y.C., Wang, A.C., Wang, D.A. and Chen, C.C., 2009. Machining performance and optimizing machining parameters of Al2O3–TiC ceramics using EDM based on the Taguchi method. Materials and manufacturing processes, 24(6), pp.667-674. [9].Eşme, U., 2009. Application of Taguchi method for the optimization of resistance spot welding process. Arabian Journal for Science and Engineering, 34(2), p.519. [10]. Kamaruddin, S., Khan, Z.A. and Foong, S.H., 2010. Application of Taguchi method in the optimization of injection moulding parameters for manufacturing products from plastic blend. International Journal of Engineering and technology, 2(6), p.574. [11]. Kuo, C.F.J., Su, T.L., Jhang, P.R., Huang, C.Y. and Chiu, C.H., 2011. Using the Taguchi method and grey relational analysis to optimize the flat-plate collector process with multiple quality characteristics in solar energy collector manufacturing. Energy, 36(5), pp.3554-3562. [12]. Sapakal, S.V. and Telsang, M.T., 2012. Parametric optimization of MIG welding using Taguchi design method. Int J Adv Eng Res Stud, 1(4), pp.28-30. [13]. Kotcioglu,