Journals / El-Cezeri / 2022 / Cilt: 9 - Sayı: 1

Miswak, Boric Acid and Porcelain Waste Reinforced Polyester Matrix Composites

Misvak, Borik Asit ve Porselen Atığı Takviyeli Polyester Matrisli Kompozitler

Journal
El-Cezeri
Pages
335–349
Publication Date
2022-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, due to its fiber-like structure and chemical content, the positive contribution of the miswak additive to the impact resistance and antibacterial effect was observed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the study, the mechanical, physical and antibacterial properties of polyester matrix hybrid composites with miswak, boric acid and porcelain waste additives were investigated to obtain information about their usability in different applications.
📊
Key Findings & Data:Antibacterial tests were carried out according to ASTM 2180, contact angle measurements were made, surface energies were calculated and the antibacterial effect-contact angle relationship was investigated.
💡
Conclusion & Impact:As a result, due to its fiber-like structure and chemical content, the positive contribution of the miswak additive to the impact resistance and antibacterial effect was observed.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Misvak · Borik Asit · Hibrit Kompozit

Abstract

In the study, the mechanical, physical and antibacterial properties of polyester matrix hybrid composites with miswak, boric acid and porcelain waste additives were investigated to obtain information about their usability in different applications. Polymer matrix composite products are produced by casting method. Physico-mechanical properties such as bulk density, porosity, three-point bending strength, elastic modulus in bending, shore hardness, impact resistance of samples were determined. The polished and fractured surfaces of the samples were examined by scanning electron microscopy. Antibacterial tests were carried out according to ASTM 2180, contact angle measurements were made, surface energies were calculated and the antibacterial effect-contact angle relationship was investigated. As a result, due to its fiber-like structure and chemical content, the positive contribution of the miswak additive to the impact resistance and antibacterial effect was observed.

Özet

Yapılan çalışmada misvak, borik asit ve porselen atığı katkılı polyester matrisli hibrit kompozitlerin mekanik, fiziksel ve antibakteriyel özellikleri farklı uygulamalarda kullanılabilirlikleri hakkında bilgi edinmek için araştırılmıştır. Polimer matrisli kompozit ürünler döküm yöntemi ile üretilmiştir. Üretilen ürünlerin bulk yoğunluğu, gözenekliliği, üç nokta eğme mukavemeti, eğmede elastik modülü, shore sertliği, darbe direnci gibi fiziko-mekanik özellikleri belirlenmiştir. Taramalı elektron mikroskobu ile numunelerin parlatılmış ve kırık yüzeyleri incelenmiştir. Antibakteriyel testler ASTM 2180'e göre gerçekleştirilmiş, temas açısı ölçümleri yapılmış, yüzey enerjileri hesaplanarak antibakteriyel etki-temas açısı ilişkisi araştırılmıştır. Sonuç olarak, fiberimsi yapısı ve kimyasal içeriği nedeniyle misvak katkısının darbe direnci ve antibakteriyel etkiye olumlu etki sağladığı tespit edilmiştir.

🔖

Cite This Article

AÇIKBAŞ, G. (2022). Miswak, Boric Acid and Porcelain Waste Reinforced Polyester Matrix Composites. El-Cezeri, Cilt: 9 - Sayı: 1, 335–349. https://ajindex.com/articles/393354

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . Perov, B.V., Khoroshilova, I.P., “Hybrid composite materials”, Polymer Matrix Composites, Springer, Netherlands, (1995). [2]. Sano, T., Randow, C., Kim, C.-S., “Introduction”, Hybrid and Hierarchical Composite Materials”, Springer International Publishing, Switzerland, (2015). [3]. Açıkbaş, G., Özcan, S., Çalış Açıkbaş, N., “Production and characterization of a hybrid polymer matrix composite”, Polymer Composites, 2018, 39(11): 4080-4093. [4]. Taşgın, Y., “Katalizör olarak katılan bor oksit ve borik asidin polyester üzerindeki etkilerinin mekanik ve mikroyapı açısından incelenmesi.” Fırat Üniversitesi Mühendislik Bilimleri Dergisi, 2018, 30(2): 303-311. [5]. Al-Oqla, F. M., Sapuan, S., “Natural fiber composites”, Materials Selection for Natural Fiber Composites, Woodhead Publishing, United Kingdom, (2018). [6]. Bahçe, H., Temiz, Ş., “Investigation of Ballistic Behavior of Agricultural Waste Doped Hybrid Composite Plates in Vacuum Infusion Method”, El-Cezeri, 2019, 6(3): 881-893. [7]. Akpınar, S., Evcin, A., “Silan Modifiye Mermer Toz Atıklarının Epoksi Polimer Özelliklerine Etkilerinin Araştırılması”, El-Cezeri, 6(3): 712-725. [8]. Acikbas, G., Calis Acikbas, N., Ikizek, E., Ozel, M., Eker, A.S., “Characterization of green epoxy matrix composites filled with ceramic wastes”, 2nd International Symposium on Innovative Technologies in Engineering and Science(ISITES2014), Karabük, 597–606, 2014. [9]. Yaman Islak., Açikbaş, G., Çalış Açikbaş, N., “Epoksi Matrisli Kompozitlerde Katı Yağlayıcı İlavesinin Sürtünme Kaybının Azaltılmasına Etkisinin İncelenmesi”, Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 2019, 8(1): 583-592. [10]. Açıkbaş, G., “Interfacial and physico-mechanical properties of walnut shell fiber reinforced polyester matrix composites. Materials Testing, 2018, 60(5): 510-518. [11]. Wambua, P., Ivens, J., Verpoest, I., “Natural fibres: can they replace glass in fibre reinforced plastics?”, Composites science and technology, 2003, 63(9): 1259-1264. [12]. Joshi, S.V., Drzal, L.T., Mohanty, A.K., Arora, S., “Are natural fiber composites environmentally superior to glass fiber reinforced composites?” Composites Part A: Applied science and manufacturing, 2004, 35(3): 371-376. [13]. Sher, H., Al-Yemeni, M. N., Masrahi, Y. S., & Shah, A. H., “Ethnomedicinal and ethnoecological evaluation of Salvadora persica L.: A threatened medicinal plant in Arabian Peninsula” J. Med. Plants Res., 2010, 4(12): 1209-1215. [14]. Darout, I.A., Chris