Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2021 / Cilt: 9 - Sayı: 1

PORCELAIN TILE SURFACE MODIFICATION

PORSELEN KARO YÜZEY MODİFİKASYONU

Pages
240–254
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The highest contact angle after polymer coating was obtained as 139o in N2 glaze composition.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The contact angle of the water droplet exceeds 90 degrees; surfaces are called as hydrophobic.
📊
Key Findings & Data:Hydrophobic surfaces are widely used especially in hygienic environments.
💡
Conclusion & Impact:The highest contact angle after polymer coating was obtained as 139o in N2 glaze composition.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hidrofobik Yüzeyler · Porselen Karo · Çinko Oksit

Abstract

The contact angle of the water droplet exceeds 90 degrees; surfaces are called as hydrophobic. Hydrophobic surfaces are widely used especially in hygienic environments. In the study, it was aimed to obtain the hydrophobic surface on the industrial porcelain tile surface by making two different types of polymer coating based on alcohol and water and modifying the commercially porcelain tile glaze with self-hydrophobic zinc oxide. Morphological development of the surfaces was examined by SEM and phase development was determined by XRD. The contact angle of the polymer coated and uncoated surfaces were measured with contact angle goniometer and the results compared. As a result, it has been found that surfaces coated with alcohol-based polymer have a better hydrophobic effect than surfaces coated with water-based polymer. After industrial firing of glaze compositions with the addition of micron-sized zinc oxide willemite phase was observed while the use of nano-size zinc oxide provided the development of zincite phase. The cracking was observed on the nano zinc oxide modified glaze surfaces which allow the surface to absorb water, so the contact angle couldn’t be measured of uncoated surfaces. The highest contact angle after polymer coating was obtained as 139o in N2 glaze composition.

Özet

Su damlasının üzerinde 90o’den büyük açı yaptığı yüzeyler hidrofobik yüzeyler olarak adlandırılır. Hidrofobik yüzeyler özellikle hijyen gerektiren ortamlarda yaygın olarak kullanılmaktadır. Yapılan çalışmada endüstriyel porselen karo yüzeyinde hidrofobik yüzey özelliğinin alkol ve su bazlı iki farklı türde polimer kaplama yapılması ve kendinden hidrofobik özelliğe sahip çinko oksit tozu ile ticari porselen karo sırının modifiye edilmesiyle eldesi amaçlanmıştır. Yüzeylerin morfolojik gelişimi taramalı elektron mikroskobu ile incelenmiş ve faz gelişimi X-ışınları difraksiyon cihazı ile belirlenmiştir. Temas açısı gonyometresi kullanılarak polimer kaplanmamış ve alkol ve su bazlı polimer ile kaplanmış yüzeylerin temas açıları ölçülüp, kıyaslanmıştır. Sonuç olarak alkol bazlı polimer ile kaplanmış yüzeylerin su bazlı polimer ile kaplanmış yüzeylere göre daha iyi hidrofobik etki gösterdiği tespit edilmiştir. Mikron boyutunda çinko oksit ilavesi yapılan sır kompozisyonlarının endüstriyel fırında pişirim sonrasında willemit (Zn2SiO4) fazı gelişimi gözlenirken, nano boyutta çinko oksit kullanımı zinsit fazı (ZnO) gelişimini sağlamıştır. Nano çinko oksit modifiyeli sırlarda yüzeyde çatlak oluşumu yüzeyin su emmesini sağladığından kaplanmamış yüzeylerin temas açısı ölçümü gerçekleştirilememiştir. Polimer kaplama sonrası en yüksek temas açısı 139o olarak N2 kodlu sır kompozisyonunda elde edilmiştir.

🔖

Cite This Article

AÇIKBAŞ, N. Ç., AÇIKBAŞ, G., KAYALI, M. B. (2022). PORCELAIN TILE SURFACE MODIFICATION. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 9 - Sayı: 1, 240–254. https://ajindex.com/articles/583464

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Abadir, M. F., Sallam, E. H., & Bakr, I. M., 2002. Preparation of porcelain tiles from Egyptian raw materials. Ceramics International, 28(3), 303-310.
  2. Acchar W., Dultra E.J.V., 2015. Porcelain Tile. In: Ceramic Materials from Coffee Bagasse Ash Waste. Springer Briefs in Applied Sciences and Technology. Springer, Cham Açıkbaş, G., Suvacı E and Kara, F., 2008. Sır Yüzeyinde Uçucu Organik İlavelerle Morfoloji Eldesi. Uluslararası Katılımlı VII. Seramik Kongresi, 280-288,
  3. Afyon, Türkiye. Açıkbaş, G., 2007. Seramik Yüzeylerde Mikromorfoloji Oluşturulması. Yüksek Lisans Tezi, Anadolu Üniversitesi,
  4. Fen Bilimleri Enstitüsü, Eskişehir. Açıkbaş, G., Özcan S. and Çalış Açıkbaş, N., 2014. Formation of Superhydrophobic Character on Ceramic Surfaces, 2nd International Symposium on Innovative Technologies in Engineering and Science, 606-613.
  5. Alves, H. J., Melchiades, F. G., & Boschi, A. O., 2012. Effect of feldspar particle size on the porous microstructure and stain resistance of polished porcelain tiles. Journal of the European Ceramic Society, 32(10), 2095-2102. Beltrán, V., Ferrer, C., Bagán, V., Sánchez, E., Garcia, J., & Mestre, S., 1996. Influence of pressing powder characteristics and firing temperature on the porous microstructure and stain resistance of porcelain tile. In Qualicer 96. IV World Congress on Ceramic Tile Quality. General Conferences and Communications. Pt. 1. Castellon (Vol. 10, No. 13). Bresciani, A., Graziani, G. P., & Ricci, C. 2002. New glazed porcelain tile manufacturing technology: pre-pressing, dry decoration and green cutting. Qualicer. 255-270.
  6. Çalış Açıkbaş N., Açıkbaş, G., Özcan, S. A method for obtaining superhydrophobic surfaces by means of inorganic surface modification, Section C - Chemistry; Metallurgy, TR 2015 03257 B, (2017).
  7. De Noni Jr, A., Hotza, D., Soler, V. C., & Vilches, E. S., 2010. Influence of composition on mechanical behaviour of porcelain tile. Part I: Microstructural characterization and developed phases after firing. Materials Science and Engineering: A, 527(7-8), 1730-1735.
  8. Dondi, M., Ercolani, G., Guarini, G., Melandri, C., Raimondo, M., e Almendra, E. R., & Cavalcante, P. T., 2005. The role of surface microstructure on the resistance to stains of porcelain stoneware tiles. Journal of the European Ceramic Society, 25(4), 357-365.
  9. Hasmaliza, M., Foo, H. S., & Mohd, K., 2016. Anatase as antibacterial material in ceramic tiles. Procedia chemistry, 19, 828-834.
  10. Hupa, L., Bergman, R., Fröberg, L., Vane-Tempest, S., Hup