Journals / Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi / 2021 / Cilt: 8 - Sayı: 2

Synthesis and Characterization of Bio-Derived Monoliths

Biyolojik Kaynaklı Monolitlerin Sentezi ve Karakterizasyonu

Pages
826–832
Publication Date
2021-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was determined that the presence of d-limonene led to an extraordinary one-hollowed ring morphology due to the porogen effect of this renewable monomer.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Colloidal templating is a versatile and practical method to prepare macroporous polymer monoliths with a well-defined two-stage porosity and tuneable morphology.
📊
Key Findings & Data:Additionally, the specific surface area of the obtained monolithic materials was measured through N2 adsorption/desorption analyses by applying Brunauer–Emmet–Teller (BET) equation to the N2 isotherms of the samples.
💡
Conclusion & Impact:It was determined that the presence of d-limonene led to an extraordinary one-hollowed ring morphology due to the porogen effect of this renewable monomer.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kolloidal Şablonlama · Terpen · D-Limonen

Abstract

Colloidal templating is a versatile and practical method to prepare macroporous polymer monoliths with a well-defined two-stage porosity and tuneable morphology. Due to their advantageous morphology colloidal templated monoliths can find application in many areas. In this study, a renewable monomer was used for the development of sustainable macroporous polymer monoliths. Copolymerization of a renewable monomer mixture in a colloidal system was achieved by using a flexible diacrylate crosslinker. For this purpose, d-limonene was copolymerized with ethylene glycol dimetacrylate (EGDMA) in equivalent ratios to investigate the effect of monomer structure on the final material properties. In the end, thermal and morphological properties of the resulting sustainable macroporous polymer monoliths were investigated by Differential Scanning Calorimetry (DSC), Thermal Gravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM), respectively. Additionally, the specific surface area of the obtained monolithic materials was measured through N2 adsorption/desorption analyses by applying Brunauer–Emmet–Teller (BET) equation to the N2 isotherms of the samples. It was determined that the presence of d-limonene led to an extraordinary one-hollowed ring morphology due to the porogen effect of this renewable monomer.

Özet

Kolloidal şablonlama, iyi tanımlanmış iki aşamalı gözenekliliğe ve değişen morfolojiye sahip makro gözenekli polimer monolitleri hazırlamak için kullanılan çok yönlü ve pratik bir yöntemdir. Bu yöntemle sentezlenen monolitler, avantajlı morfolojileri nedeniyle birçok alanda uygulama bulabilirler. Bu çalışmada, sürdürülebilir makro gözenekli polimer monolitlerin geliştirilmesi için yenilenebilir bir monomer kullanılmıştır. Bu amaçla, yenilenebilir monomer karışımının kopolimerizasyonu kolloidal sistemde esnek bir diakrilat çapraz bağlayıcı kullanılarak sağlandı. Monomer yapısının nihai malzeme özellikleri üzerindeki etkisini araştırmak için d-limonen eşdeğer oranlarda etilen glikol dimetakrilat (EGDMA) ile kopolimerize edildi. Son olarak, elde edilen sürdürülebilir makro gözenekli polimer monolitlerin termal ve morfolojik özellikleri sırasıyla Diferansiyel Taramalı Kalorimetri (DSC), Termal Gravimetrik Analiz (TGA) ve Taramalı Elektron Mikroskobu (SEM) ile araştırıldı. Ek olarak, elde edilen monolitik malzemelerin spesifik yüzey alanı, numunelerin N2 izotermlerine Brunauer–Emmet–Teller (BET) denklemi uygulanarak N2 adsorpsiyon/desorpsiyon analizleri ile ölçülmüştür. Bu yenilenebilir monomerin porojen etkisinden dolayı d-limonen varlığının olağanüstü tek delikli halka morfolojisine yol açtığı belirlendi.

🔖

Cite This Article

KEKEVİ, B. (2021). Synthesis and Characterization of Bio-Derived Monoliths. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, Cilt: 8 - Sayı: 2, 826–832. https://ajindex.com/articles/393272

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Llevot, A., Dannecker, P. K., Czapiewski, M., Over, L. C., Söyler, Z., & Meier, M. A. R. (2016). Renewability is not enough: recent advances in the sustainable synthesis of biomass derived monomers and polymers. Chemical European Journal, 22, 11510 – 11521
  2. Yang, X., Li, S., Xia, J., Song, J., Huang, K., & Li, M. (2015). Renewable myrcene-based-UV-curable monomer and its copolymers with acrylated epoxidized soybean oil: design, preparation, and characterization. Bioresources, 10, 2130–2142
  3. Behr, A., & Johnen, L. (2009). Myrcene as a natural base chemical in sustainable chemistry: a critical review. Chemistry-Sustainability-Energy-Materials, 2, 1072– 1095
  4. Sibaja, B., Sargent, J., & Auad, M. L. (2014). Renewable thermoset copolymers from tung oil and natural terpenes. Journal of Applied Polymer Science, 131, 41155
  5. Ciriminna, R., Lomeli-Rodriguez, M, & Demma Carà, P. (2014). Limonene: a versatile chemical of the bioeconomy. Chemical Communications, 50, 15288–15296
  6. Aissou, M., Chemat-Djenni, Z., & Yara-Varón, E. (2017). Limonene as an agro-chemical building block for the synthesis and extraction of bioactive compounds. Comptes Rendus Chimie, 20, 346–358
  7. Matsuda, M., Satoh, K., & Kamigaito, M. (2013). 1:2-sequence-regulated radical copolymerization of naturally occurring terpenes with maleimide derivatives in fluorinated alcohol. Journal of Polymer Chemistry, 51, 1774 -1785
  8. Singh, A., & Kamal, M. (2012). Synthesis and characterization of polylimonene: Polymer of an optically active terpene. Journal of Applied Polymer Science, 125, 1456 -1459
  9. Oliveira, E. R. M., & Vieira, R. P. (2020). Synthesis and Characterization of Poly (limonene) by Photoinduced Controlled Radical Polymerization. Journal of Polymers and the Environment, 28, 2931–2938
  10. Mathers, R. T., McMahon, K. C., Damodaran, K., Retarides, C. J., & Kelley, D. J. (2006). Ring-Opening Metathesis Polymerizations in D-Limonene: Renewable Polymerization Solvent and Chain Transfer Agent for the Synthesis of Alkene Macromonomers. Macromolecules, 39, 8982-8986
  11. Claudino, M., Jonsson, M., & Johansson, M. (2013). Thiol–ene coupling kinetics of D-limonene: a versatile ‘non-click’ free-radical reaction involving a natural terpene. RSC Advances, 3, 11021
  12. Lu, W. C., Zhang, T. J., Huang, D. W., & Li, P. H. (2014). Nanoemulsion of D-limonene in water system prepared by ultrasonic emulsification. Journal of Cosmetic Science, 65(4), 245-252
  13. Li, P. H., & Chian