Journals / Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi / 2020 / Cilt: 7 - Sayı: 1

Preparation of Methacrylate Based Spherical Polymers via High Internal Phase Emulsion Templating

Yüksek İç Fazlı Emülsiyon Kalıplama ile Metakrilat Esaslı Küresel Polimerlerin Hazırlanması

Pages
141–151
Publication Date
2020-06-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The specific surface areas were calculated by applying Brunauer–Emmett–Teller (BET) equation to the N2 adsorption/desertion isotherms of the resulting beads.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Epoxy functional spherical polymer beads were synthesized by using precursor concentrated emulsions templates obtained by dispersing aqueous internal phase solution in the monomer mixture composed of glycidyl methacrylate (GMA) and 1,3-butandiol dimethacrylate having flexible groups.
📊
Key Findings & Data:For this purpose, high internal phase emulsions (HIPEs) of GMA and BDDMA were obtained with the use of aqueous pullulan solutions as the internal phase.
💡
Conclusion & Impact:The specific surface areas were calculated by applying Brunauer–Emmett–Teller (BET) equation to the N2 adsorption/desertion isotherms of the resulting beads.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Emulsion templating · High internal phase emulsion · polyHIPE beads

Abstract

Epoxy functional spherical polymer beads were synthesized by using precursor concentrated emulsions templates obtained by dispersing aqueous internal phase solution in the monomer mixture composed of glycidyl methacrylate (GMA) and 1,3-butandiol dimethacrylate having flexible groups. For this purpose, high internal phase emulsions (HIPEs) of GMA and BDDMA were obtained with the use of aqueous pullulan solutions as the internal phase. Polymerization step was achieved within the water/oil/water (w/o/w) systems that were prepared by dispersing precursor HIPEs in a secondary aqueous medium. On the other hand, by using aqueous pullulan solutions during the preparation of precursor emulsion templates, a semi-interpenetrating polymer network structure in which each individual phase or network retains their individual properties and causes synergistic interaction, was obtained. The morphological properties of the resulting polymer (polyHIPE) beads were investigated by using microscopic imaging techniques. The specific surface areas were calculated by applying Brunauer–Emmett–Teller (BET) equation to the N2 adsorption/desertion isotherms of the resulting beads.

Özet

Epoksi fonksiyonel gruplara sahip gözenekli polimer küreleri, glisidil metakrilat (GMA) ile esnek gruplara sahip 1,3-bütandiol dimetakrilat (BDDMA) karışımından oluşan monomer bileşimi içinde sulu iç faz çözeltisinin dağıtılması ile elde edilen öncü konsantre emülsiyon kalıpları kullanılarak sentezlendi. Bu amaçla, sulu pullulan çözeltilerinin iç faz olarak kullanılması ile GMA ve BDDMA’nın yüksek iç fazlı emülsiyonları (high internal phase emulsions, HIPEs) hazırlandı. Polimerleştirme adımı, öncü HIPE’lerin sekonder bir sulu ortamda dağıtılması ile elde edilen su/yağ/su (w/o/w) sistemleri içerisinde gerçekleştirildi. Öncü emülsiyon kalıplarının hazırlanmasında farklı konsantrasyonlardaki pullulan çözeltileri iç faz olarak kullanılarak, her bir bağımsız polimer fazın veya ağın kendi özelliklerini koruduğu ve birbirleri ile sinerjik bir etkileşim içinde olduğu yarı-geçişimli bir polimerik ağ yapısı elde edildi. Elde edilen polimer (poliHIPE) kürelerinin morfolojik özellikleri mikroskobik görüntüleme teknikleri ile incelendi. Spesifik yüzey alanları ise elde edilen kürelerin N2 adsorpsiyon/desorpsiyon izotermlerine Brunauer–Emmett–Teller (BET) denklemi uygulanarak hesaplandı.

🔖

Cite This Article

KEKEVİ, B., MERT, E. H., ÇİRA, F. (2020). Preparation of Methacrylate Based Spherical Polymers via High Internal Phase Emulsion Templating. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, Cilt: 7 - Sayı: 1, 141–151. https://ajindex.com/articles/251548

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Cameron, N. R., & Sherrington, D. C. (1996). High Internal Phase Emulsions (HIPEs) – Structure, Properties and Use in Polymer Preparation. ss. 163-214. Advances in Polymer Science Book Series (Polymer, Volume 126). Springer-Verlag Berlin Heidelberg 214s
  2. Cameron, N. R. (2005). High Internal Phase Emulsion Templating as a Route to Well-defined Porous Polymers. Polymer, 46, 1439–1449
  3. Silverstein, M. S. (2014). Emulsion-Templated Porous Polymers: A Retrospective Perspective. Polymer, 55, 304-320
  4. Silverstein, M. S. (2014). PolyHIPEs: Recent Advances in Emulsion-Templated Porous Polymers. Progress in Polymer Science, 39, 199-234
  5. Silverstein, M. S. (2017). Emulsion-Templated Polymers: Contemporary Contemplations. Polymer, 126, 261-282
  6. Barby, D., & Haq, Z. (1982). Low Density Porous Cross-linked Polymeric Materials and Their Preparation. European Patents 0,060,138 (to Unilever)
  7. Pulko, I., & Krajnc, P. (2012). High Internal Phase Emulsion Templating – A Path to Hierarchically Porous Functional Polymers. Macromolecular Rapid Communications. 33, 1731−1746
  8. Zhang, T., Sanguramath, R. A., Israel, S., & Silverstein, M. S. (2019). Emulsion Templating: Porous Polymers and Beyond. Macromolecules, 52, 5445−5479
  9. Mert, H. H., Mert, M. S., & Mert, E. H. (2019). A Statistical Approach for Tailoring the Morphological and Mechanical Properties of Polystyrene PolyHIPEs: Looking through Experimental Design. Materials Research Express, 6 (11) 115306. [10]Oschatz, M., Borchardt, L., Thommes, M., Cychosz, K. A., Senkovska, I., Klein, N., Frind, R., Leistner, M., Presser, V., Gogotsi, Y., & Kaskel, S. (2012). Carbide-Derived Carbon Monoliths with Hierarchical Pore Architectures. Angewandte Chemie International Edition, 51, 7577 –7580. [11]Oschatz, M., Borchardt, L., Senkovska, I., Klein, N., Leistner, M., & Kaskel, S. (2013). Carbon dioxide Activated Carbide-Derived Carbon Monoliths as High Performance Adsorbents. Carbon, 56, 139-145. [12]Deshmukh, A. B., Nalawade, A. C., Karbhal, I., Qureshi, M. S., & Shelke, M. V. (2018). Electrochemical Capacitive Energy Storage in PolyHIPE Derived Nitrogen Enriched Hierarchical Porous Carbon Nanosheets. Carbon, 128, 287-295. [13]Wakeman, R. J., Bhumgara, Z. G., & Akay, G. (1998). Ion Exchange Modules Formed from Polyhipe Foam Precursors. Chemical Engineering Journal, 70, 133-141. [14]Alikhani, M., & Moghbeli, M. R. (2014). Ion-Exchange PolyHIPE Type Membrane for Removing Nitrate Ions: Preparation, Characte