Journals / Environmental Research and Technology / 2021 / Cilt: 4 - Sayı: 4

Macroporous thermoset monoliths from glycidyl methacrylate (GMA)-based high internal phase emulsions (HIPEs): Effect of cellulose nanocrystals (CNCs) as filler - Functionalization and removal of Cr(III) from aqueous solutions

Pages
358–368
Publication Date
2021-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that CNCs have a significant influence on the thermal stability and the compressive strength of the obtained foams.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Macroporous foams having 80 vol % of nominal porosity were synthesized by the copolymerization crosslinking of glycidyl methacrylate (GMA) based high internal phase emulsions (HIPEs).
📊
Key Findings & Data:For this purpose, CNCs were added to the continuous oil phase during emulsification process at a loading rate of 1, 5 or 7 wt %.
💡
Conclusion & Impact:It was found that CNCs have a significant influence on the thermal stability and the compressive strength of the obtained foams.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Amine functionalization · chrome (III) removal · CNC

Abstract

Macroporous foams having 80 vol % of nominal porosity were synthesized by the copolymerization crosslinking of glycidyl methacrylate (GMA) based high internal phase emulsions (HIPEs). To alter the mechanical and thermal properties, cellulose nanocrystals (CNCs) were used as filler. For this purpose, CNCs were added to the continuous oil phase during emulsification process at a loading rate of 1, 5 or 7 wt %. Consequently, composite foams were obtained by purification of the polymerized HIPEs (polyHIPEs). The effect of CNCs on the morphological and mechanical properties was investigated. It was found that CNCs have a significant influence on the thermal stability and the compressive strength of the obtained foams. In the end, the neat polyHIPE foam and the polyHIPE/CNC composite foam with 1 wt % of CNC were post-functionalized by reacting phenylimidazole (PIAL) with the epoxy ring of the GMA units. Resulting amine functional foams and the neat foam were utilized in Cr(III) removal from aqueous solutions. It was demonstrated that amine functional foams have a great potential as sorbent materials. The results also showed that the existence of CNCs decreased the performance for removing Cr(III) ions. Nevertheless, functionalization by PIAL significantly improved the selectivity of Cr(III) in comperasion with the neat polyHIPE foam.

🔖

Cite This Article

KEKEVİ, B., EŞLEK, A., MERT, E. H. (2021). Macroporous thermoset monoliths from glycidyl methacrylate (GMA)-based high internal phase emulsions (HIPEs): Effect of cellulose nanocrystals (CNCs) as filler - Functionalization and removal of Cr(III) from aqueous solutions. Environmental Research and Technology, Cilt: 4 - Sayı: 4, 358–368. https://ajindex.com/articles/754199

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. H. Bartl and W. Bonnin, “Über die polymerisation in umgekehrter emulsion,” Die Makromolekulare Chemie, Vol.57, pp.74-95, 1962. K.M.L. Taylor-Pashow and J.G. Pribyl, “PolyHIPEs for Separations and Chemical Transformations: A Review,” Solvent Extraction and Ion Exchange, Vol. 37, pp. 1–26, 2019. N.R. Cameron and D.C. Sherrington, “High internal phase emulsions (HIPEs) — Structure, prop-erties and use in polymer preparation”. In: Biopolymers Liquid Crystalline Polymers Phase, Emulsion. Advances in Polymer Science, 126, Springer, Berlin, Heidelberg (1996). W. Ostwald, “Beiträge zur kenntnis der emulsionen,” Colloid and Polymer Science, Vol. 6, pp.103–109, 1910. K.J. Lissant, “The geometry of high-internal-phase-ratio emulsions,” Journal of Colloid and Interface Science, Vol. 22, pp. 462–468, 1966.
  2. H.H. Mert, M.S. Mert and E.H. Mert, “A statistical approach for tailoring the morphological and mechanical properties of polystyrene PolyHIPEs: looking through experimental design,” Materials Research Express, Vol. 6, 115306, 2019. S.D. Kimmins and N.R. Cameron, “Functional Porous Polymers by Emulsion Templating: Recent Advances,”Advanced Functional Materials, Vol. 21, pp. 211–225, 2011.
  3. S. Yang, L. Zeng, Z. Li, X. Zhang, H. Liu, C. Nie and H. Liu, “Facile approach to glycidyl methacrylate-based polyHIPE monoliths with high epoxy-group content,” European Polymer Journal, Vol. 57, 127–136, 2014.
  4. N. Brun, S. Ungureanu, H. Deleuze and R. Backov, “Hybrid foams, colloids and beyond: From design to applications”, Chemical Society Reviews, Vol.40, pp.771-788, 2011. M. S. Silverstein, “Emulsion-templated porous polymers: A retrospective perspective”, Polymer, Vol. 55, pp. 304–320, 2014.
  5. J. M. Williams, A. J. Gray, M. H. Wilkerson, “Emulsion stability and rigid foams from styrene or divinylbenzene water-in-oil emulsions”, Langmuir, Vol. 6, pp. 437–444, 1990.
  6. R. Butler, I. Hopkinson and A. I. Cooper, “Synthesis of Porous Emulsion-Templated Polymers Using High Internal Phase CO2-in-Water Emulsions”, Journal of American Chemical Society, Vol.125, pp. 14473–14481, 2003.
  7. C.H. Yao, L. Qi, H.Y. Jia, P.Y. Xin, G.L. Yang, and Y. Chen.” A novel glycidyl methacrylate-based monolith with sub-micron skeletons and well-defined macropores”. Journal of Material Chemistry, Vol. 19, pp. 767–772, 2009. P.M. Solozhenkin and A.I. Zouboulis, “Removal of arsenic compounds by chemisorption filtration”, Journal of Mining Science, Vol.43, pp. 212-220, 2007. S. De and A. Khan, “Efficient synthesis of m