SavedAdd your journal

Journals / Tekstil ve Mühendis / 2017 / Cilt: 24 - Sayı: 107

EVALUATION OF WOVEN FABRIC PERFORMANCES OF AIR-JET YARNS

HAVA JETLİ İPLİKLERİN DOKUMA KUMAŞ PERFORMANSLARININ DEĞERLENDİRİLMESİ

HÜSEYİN GAZİ TÜRKSOY
Tuğba AKKAYA
SÜMEYYE ÜSTÜNTAĞ
Pages
138–145
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, it was found that there is an insignificant difference between abrasion resistance, wrinkle resistance and thickness values of fabrics woven by two different air jet yarns.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:As one of the new spinning methods, air-jet spinning systems gathered attention with their market share.
📊
Key Findings & Data:In this study, various properties of fabrics produced by air-jet yarns were comparatively analyzed with the properties of fabrics produced by the equivalent ring yarns.
💡
Conclusion & Impact:Also, it was found that there is an insignificant difference between abrasion resistance, wrinkle resistance and thickness values of fabrics woven by two different air jet yarns.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

As one of the new spinning methods, air-jet spinning systems gathered attention with their market share. In this study, various properties of fabrics produced by air-jet yarns were comparatively analyzed with the properties of fabrics produced by the equivalent ring yarns. This study revealed that the abrasion and pilling resistance of fabrics woven from air jet yarns have superior properties when compared to the ring counterparts. Also, it was found that there is an insignificant difference between abrasion resistance, wrinkle resistance and thickness values of fabrics woven by two different air jet yarns.

Özet

Yeni iplik eğirme metotları arasında, hava jetli iplik eğirme sistemleri yakaladıkları pazar payı ile dikkat çekmektedirler. Bu çalışmada, hava jetli eğirme metodu ile üretilen ipliklerden dokunan kumaşların özellikleri, eş değer şartlarda üretilen ring ipliklerden üretilen kumaşların özellikleri ile karşılaştırmalı olarak incelenmiştir. Çalışma sonucunda, hava jetli eğirme sistemleri ile üretilen ipliklerden dokunan kumaşların aşınma ve boncuklanma dayanımının ring ipliklerden mamul kumaşlara göre daha üstün özelliklere sahip oldukları görülmüştür. Ayrıca iki farklı hava jetli eğirme sistemi ile üretilen ipliklerden mamul kumaşların aşınma dayanımı, buruşmazlık ve kalınlık değerleri arasında istatistiki açıdan anlamlı bir farklılık olmadığı görülmüştür.

🔖

Cite This Article

TÜRKSOY, H. G., AKKAYA, T., ÜSTÜNTAĞ, S. (2017). EVALUATION OF WOVEN FABRIC PERFORMANCES OF AIR-JET YARNS. Tekstil ve Mühendis, Cilt: 24 - Sayı: 107, 138–145. https://ajindex.com/articles/366251

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Basal, G., (2003), The Structure and Properties of Vortex and Compact Spun Yarns, Ph.D. Thesis (unpublished), Fiber and Polymer Science, NCSU, Raleigh, 1-139
  2. Ülkü, Ş., (2002), Yeni İplikçilik Sistemleri, Uludağ Üniversitesi Yayını, Bursa
  3. Nakahara,T., Keller, A.H., (1981), The New Air jet Spinning System from Japan, International Textile Bulletin, 4:407-408
  4. Muratec, (2015), Vortex Spinning System 870, Cat No.171P4C2- 05-9-3 (NS)
  5. Eldessouki, M., Ibrahim, S., Farag, R., (2015) Dynamic properties of air-jet yarns compared to rotor spinning, Textile Research Journal, vol. 85, No. 17, 1827-1837
  6. Ortlek, H. G., Onal, L., (2008), Comparative Study on the Characteristics of Knitted Fabrics Made of Vortex-Spun Viscose Yarns, Fibers and Polymers, vol. 9, No. 2, 194-199
  7. Ortlek, H.G., Ülkü, Ş., (2005), Pilling and Abrasion Performances of Murata Vortex Spun Cotton Yarns, Melliand International, Vol. 11, 287-289
  8. Beceren, Y., Nergis, B. U., (2015), Comparison of the Effects of Cotton Yarns Produced by New, Modified and Conventional Spinning Systems on Yarn and Knitted Fabric Performance, Textile Research Journal, Vol. 78(4), 297-303
  9. Erdumlu, N., Ozipek, B., Oztuna, A. S., Cetinkaya, S., (2009), Investigation of Vortex Spun Yarn Properties in Comparison with Conventional Ring and Open-end Rotor Spun Yarns, Textile Research Journal, Vol. 79(7), 585-595
  10. Suziki, Y., Sukigara, S., (2013), Mechanical and tactile properties of plain knitted fabrics produced from rayon Vortex yarns, Textile Research Journal, Vol. 83(7), 740-751
  11. Ortlek, H. G., Yolaçan, G., Bilget, Ö., Bilgin, S., (2010), Effects Of Enzymatıc Treatment On The Performance Of Knıtted Fabrıcs Made From Different Yarn Types, Tekstil ve Konfeksiyon, Vol. 20, 115-119
  12. Kireçci, A., Erdal, P. P., İçoğlu, H. İ., (2009), Comparison of the Fastness Properties and Color Values of Cotton Fabrics Knitted From Air-Vortex And Ring Spun Yarns, Tekstil ve Konfeksiyon, Vol. 4, 304-311
  13. Unal, G. P., (2007), Investigation of Some Handle Properties of Fabrics Woven with Two Folded Yarns of Different Spinning Systems, Textile Research Journal. Vol 80(19)
  14. D1777-96, (2002), Standard Test Method for Thickness of Textile Materials
  15. TS EN ISO 12945-2, (2002), Tekstil- Kumaşlarda yüzey tüylenmesi ve boncuklanma yatkınlığının tayini- Bölüm 2: Geliştirilmiş martindale metodu
  16. TS EN ISO 12947-3, (2001), Tekstil - Martindale metoduyla kumaşların aşınmaya karşı dayanımının tayini- Bö