The results showed that the draft ratio and twist coefficient are the important factors influencing the core visibility ratios of dual core-spun yarns.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:The aim of this work is to determine the effect of draft ratio and twist level on core visibility ratios of dual core-spun yarns.
📊
Key Findings & Data:For this aim, different types dual-core yarns containing PET/Elastane were produced under controlled conditions.
💡
Conclusion & Impact:The results showed that the draft ratio and twist coefficient are the important factors influencing the core visibility ratios of dual core-spun yarns.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Dual-core yarn · pre-treated dual-core yarn · core visibility ratio
Abstract
The aim of this work is to determine the effect of draft ratio and twist level on core visibility ratios of dual core-spun yarns. For this aim, different types dual-core yarns containing PET/Elastane were produced under controlled conditions. To objectively evaluate the visual quality of the dual-core yarns, the frequency of the core filaments appearing on the yarn surfaces was counted on dyed knitted fabrics produced with these yarns by using image processing algorithm. The results showed that the draft ratio and twist coefficient are the important factors influencing the core visibility ratios of dual core-spun yarns.
KILIÇ, G., YILDIRIM, B., ÇELİK, H. İ., ÜSTÜNTAĞ, S., TÜRKSOY, H. G. (2020). THE EFFECTS OF PRODUCTION PARAMETERS ON THE CORE VISIBILITY RATIO OF DUAL CORE YARNS. Tekstil ve Konfeksiyon, Cilt: 30 - Sayı: 1, 3–9. https://ajindex.com/articles/88918
Shanbeh, M., Baghaei, B., Alidadi, S., Tabibi, A., 2011, “Coating of Core Yarn. An Alternative Method of Decreasing the Strip-back Phenomenon of Core-spun Yarns”, FIBRES & TEXTILES in Eastern Europe, Vol: 19, No: 5 (88), pp: 28-32.
Kim, H. J., Kim, J. S., Lim, J. H., Huh, Y., 2009, “Detection of Wrapping Defects by a Machine Vision and its Application to Evaluate the Wrapping Quality of the Ring Core Spun Yarn”, Textile Research Journal, Vol: 79(17), pp: 1616-1624.
Miao, M., Barnes, S., Vuckovic, L., 2010, “High-speed video graphic study of filament-core yarn spinning”, The Journal of The Textile Institute, Vol: 101(3), pp:242–252.
Sawhney, A.P.S., Kimmel, L.B., 1992, “Improved method of producing a cotton covered/polyester staple-core yarn on a ring spinning frame”, Textile Research Journal, Vol: 61(19), pp:21-25.
Miao, M., How, Y. L., and Ho, S. Y., 1996, “Influence of Spinning Parameters on Core Yarn Sheath Slippage and Other Properties”, Textile Res. J., Vol:66(11), pp:676–684.
Su, C., Maa, M., Yang, H., 2004, “Structure and Performance of Elastic Core-Spun Yarn”, Textile Res. J., Vol:74(7), pp:607–610.
Babaarslan, O., 2001, “Method of Producing a Polyester/Viscose Core-Spun Yarn Containing Spandex Using a Modified Ring Spinning Frame”, Textile Res. J., Vol: 71(4), pp:367–371.
Ute, T. B., 2018, “Analysis of mechanical and dimensional properties of the denim fabrics produced with double-core and core-spun weft yarns with different weft densities with double-core and core-spun weft yarns with different weft densities”, The Journal of The Textile Institute, DOI: 10.1080/00405000.2018.1470451. Zhang, H., Xue, Y., Wang, S., 2006, “Effect of filament over-feed ratio on surface structure of rotor-spun composite yarns”, Textile Research Journal, Vol: 76 (12), pp: 922-923.
Hau, T., Wong, N. S., Tang, W. M., 2018, “Study on properties of elastic core-spun yarns containing a mix of spandex and PET/PTT bi-component filament as core”, Textile Research Journal, Vol. 88(9), pp:1065–1076.
Babaarslan, O., 2001, “Method of Producing A Polyester/Viscose Core-Spun Yarn Containing Spandex Using A Modified Ring Spinning Frame”, Textile Research Journal, Vol. 71(4), pp:367-371.
Çelik, P., Bedez Üte, T., Özden, D., Çömlekçi, H., Akkale, E.C., 2009, “Öz/Manto Oranı ve Büküm Sayısının Filament Özlü İpliklerin İplik Özelliklerine Etkisi”, Tekstil Teknolojileri Elektronik Dergisi, Vol: 3 (2), pp: 29-37.